summaryrefslogtreecommitdiff
path: root/interface-definitions/include/accel-ppp
AgeCommit message (Collapse)Author
2024-01-03xml: T5738: add constraint building block with alphanumeric, hypen, ↵Christian Breunig
underscore and dot
2023-12-20T5801: Rewritten L2TP to get_config_dictaapostoliuk
Rewritten L2TP to get_config_dict Rewritten L2TP xml to accel-ppp patterns Migrated 'idle' to 'ppp-options.lcp-echo-timeout' Migrated 'authentication.mppe' to 'ppp-options.mppe' Migrated 'authentication.radius.dae-server' to 'authentication.radius.dynamic-author' Migrated 'authentication.require' to 'authentication.protocol' Added 'authentication.radius.acct-interim-jitter' Added 'authentication.radius.preallocate-vif' Added 'authentication.radius.server.<IP>.acct-port' Added 'ppp-options.ipv4' Added smoke-tests Fixed 'preallocate-vif' in SSTP
2023-12-04accel-ppp: T5688: Standardized pool configuration in accel-pppaapostoliuk
Standardized pool configuration for all accel-ppp services. 1. Only named pools are used now. 2. Allows all services to use range in x.x.x.x/mask and x.x.x.x-x.x.x.y format 3. next-pool can be used in all services 2. Allows to use in ipoe gw-ip-address without pool configuration which allows to use Fraimed-IP-Address attribute by radius. 3. Default pool name should be explicidly configured with default-pool. 4. In ipoe netmask and range subnet can be different.
2023-11-02Merge pull request #2427 from sever-sever/T5704Christian Breunig
T5704: PPPoE L2TP SSTP IPoE add option max-concurrent-sessions
2023-11-02T5704: PPPoE L2TP SSTP IPoE add option max-concurrent-sessionsViacheslav Hletenko
Add `max-starting` option: [common] max-starting=N Specifies maximum concurrent session attempts which server may processed set service pppoe-server max-concurrent-sessions '30' Useful to prevent high CPU utilization and compat execution scripts per time.
2023-11-01T4726: Remove accel-ppp RADIUS vendor validatorsViacheslav Hletenko
The vendor name could contain Uppercase or lowercase symbols and not rely on the dictionary name but on dictionary value / # cat /usr/share/freeradius/dictionary.cisco | grep -i vendor VENDOR Cisco 9 Another example VENDOR Alcatel-IPD 6527 This way if we use `vendor=cisco` instead of `vendor=Cisco` it will not work at all Delete vendor validators
2023-06-12T5283: ipoe-server: add more flexibility in subnet parameter.Nicolas Fort
2023-05-10T5213: Add accounting-interim-interval option for L2TP-serverViacheslav Hletenko
Add RADIUS accounting-interim-interval option for L2TP-server Specifies interval in seconds to send accounting information (may be overridden by radius Acct-Interim-Interval attribute) set vpn l2tp remote-access authentication radius accounting-interim-interval '120'
2023-05-09T5213: Add accounting-interim-interval option for PPPoE IPoE SSTPViacheslav Hletenko
Add RADIUS accounting-interim-interval option for PPPoE/IPoE/SSTP servers. Specifies interval in seconds to send accounting information (may be overridden by radius Acct-Interim-Interval attribute) set service pppoe-server authentication radius accounting-interim-interval '60'
2023-03-21T5099: IPoE-server add option next-pool for named ip poolsViacheslav Hletenko
In cases with multiple named IP pools, it is required the option 'next' to be sure that if IP addresses ended in one pool, then they would begin to be allocated from the next named pool. For accel-ppp it requires specific order as pool must be defined before we can use it with the 'next-option' set service ipoe-server client-ip-pool name first-pool subnet '192.0.2.0/25' set service ipoe-server client-ip-pool name first-pool next-pool 'second-pool' set service ipoe-server client-ip-pool name second-pool subnet '203.0.113.0/25' [ip-pool] 203.0.113.0/25,name=second-pool 192.0.2.0/25,name=first-pool,next=second-pool
2023-02-17T5005: PPPoE server allow any login with option noauthViacheslav Hletenko
Disabling authentication is useful in emergency situations (e.g. RADIUS server is down) or testing purposes. Clients can connect with any login and username. set service pppoe-server authentication mode 'noauth'
2023-02-10Merge pull request #1808 from sever-sever/T1993Christian Breunig
T1993: PPPoE-server add section shaper and fwmark option
2023-02-08T1993: PPPoE-server add section shaper and fwmark optionViacheslav Hletenko
Extended PPPoE-server rate-limiter to avoid shaping marked resources Often this feature needs for ISP, which provides access to some IX or its resources. set service pppoe-server shaper fwmark '223'
2023-02-07T4971: PPPoE server add named ip pool and attr Framed-PoolViacheslav Hletenko
Add a new feature to allow to use named pools Also it can be used with RADIUS attribute 'Framed-Pool' set service pppoe-server client-ip-pool name POOL1 gateway-address '192.0.2.1' set service pppoe-server client-ip-pool name POOL1 subnet '192.0.2.0/24'
2022-12-30T4893: Add ppp-options ipv6-interface-id for L2TPViacheslav Hletenko
Add ppp-options IPv6 interface id for vpn L2TP - fixed or random interface identifier for IPv6 - peer interface identifier for IPv6 - whether to accept peer’s interface identifier set vpn l2tp remote-access ppp-options ipv6-accept-peer-intf-id set vpn l2tp remote-access ppp-options ipv6-intf-id 'random' set vpn l2tp remote-access ppp-options ipv6-peer-intf-id 'calling-sid'
2022-12-24T4893: Move ppp-opt ipv6-intf-id to include section accel-pppViacheslav Hletenko
Move PPPoE-server ppp-options XML ipv6-intf-id to 'include' section accel-ppp It allows to use the same code for different accel-ppp services
2022-10-07Merge branch 'current' into radius-rate-limit-compChristian Poessinger
2022-10-06xml: T4722: radius: remove superfluous "default" help stringChristian Poessinger
vyos-1x automatically adds a "(default: ...)" hint to the CLI help if the <defaultValue> XML tag is used. No need to specify this manually.
2022-10-03T4726: add completion help and validation for accel-ppp vendor optionDaniil Baturin
2022-10-01T4722: consistently use the "RADIUS" spelling for the RADIUS protocolDaniil Baturin
2022-09-22xml: T4698: validating a range must be explicitly enabled in the validatorChristian Poessinger
This extends commit 28573ffe4f ("xml: T4698: drop validator name="range" and replace it with numeric"). The first version allowed both a range and discrete numbers to be validated by the numeric validator. This had a flaw as both 22 and 22-30 were valid at the same time. The generic "port-number.xml.i" building block only allows a discrete number. Now if a user set port 22-30 for e.g. SSH the daemon did no longer start. This is why range validation must be explicitly enabled.
2022-09-21ipoe: T4678: T4703: rewrite to get_config_dict()Christian Poessinger
In addition to the rewrite to make use of get_config_dict() the CLI is slightly adjusted as specified in T4703. * Rename vlan-id and vlan-range to simply vlan * Rename network-mode to simply mode * Re-use existing common Jinja2 template for Accel-PPP which are shared with PPPoE and SSTP server. * Retrieve default values via defaultValue XML node
2022-09-17pppoe-server: T4703: combine vlan-id and vlan-range into single CLI nodeChristian Poessinger
The initial Accel-PPP PPPoE implementation used: set service pppoe-server interface <name> vlan-id <id> set service pppoe-server interface <name> vlan-range <start-stop> This is actually a duplicated CLI node.
2022-08-10l2tp: T4603: Add RADIUS nas-ip-address optionViacheslav Hletenko
Add l2tp authentication radius nas-ip-address option which will be sent in NAS-IP-Address Radius attribute
2022-05-16Merge pull request #1290 from sever-sever/T4373Christian Poessinger
ppppoe-server: T4373: Add option multiplier for correct shaping
2022-05-16pppoe-server: T4373: Add option multiplier for correct shapingViacheslav Hletenko
Multiplier option is required by some vendors for correct shaping For RADIUS based rate-limits edit service pppoe-server set authentication radius rate-limit multiplier '0.001'
2022-04-29xml: T4047: use full string match in the regex validatorChristian Poessinger
2022-04-04ipoe: T2580: Add pools and gateway optionsViacheslav Hletenko
Add new feature to allow to use named pools Can be used also with Radius attribute 'Framed-Pool' set service ipoe-server client-ip-pool name POOL1 gateway-address '192.0.2.1' set service ipoe-server client-ip-pool name POOL1 subnet '192.0.2.0/24'
2022-02-24scripts: T4269: node.def generator should automatically add default valuesChristian Poessinger
Since introducing the XML <defaultValue> node it was common, but redundant, practice to also add a help string indicating which value would be used as default if the node is unset. This makes no sense b/c it's duplicated code/value/characters and prone to error. The node.def scripts should be extended to automatically render the appropriate default value into the CLI help string. For e.g. SSH the current PoC renders: $ cat templates-cfg/service/ssh/port/node.def multi: type: txt help: Port for SSH service (default: 22) val_help: u32:1-65535; Numeric IP port ... Not all subsystems are already migrated to get_config_dict() and make use of the defaults() call - those subsystems need to be migrated, first before the new default is added to the CLI help.
2021-11-03sstp: accel-ppp: T3964: add missing input validator for static-ip assignmentChristian Poessinger
2021-11-03sstp: T2566: use XML defaultValue over Jinja2 hardcoded valueChristian Poessinger
(cherry picked from commit 01ed77040ec9493e4ca1cf868ff3c22847da4487)
2021-11-03sstp: T2566: Fix to allow IPv6 only poolsViacheslav
To allow IPv6 only for vpn sstp sessions we have to add 'ppp-options' which can disable IPv4 allocation explicity. Additional IPv6 ppp-options and fix template for it. (cherry picked from commit dd036c62d1370f655a8d2075577597f24ffff7dc)
2021-09-18dhcp-server: T3838: rename dns-server to name-server nodeChristian Poessinger
IPv4 DHCP uses "dns-server" to specify one or more name-servers for a given pool. In order to use the same CLI syntax this should be renamed to name-server, which is already the case for DHCPv6.
2021-08-29xml: add missing "u32:" value declarator on integer rangesChristian Poessinger
2021-07-25xml: add building block for RADIUS nas-identifierChristian Poessinger
2021-06-29pppoe-server: T3405: Add interface cache featureDmitriyEshenko
2021-06-22sstp-l2tp: T3636: Add ipv6 optionsViacheslav
2021-04-20xml: T3488: when using regex one must use ^ and $ when checking string literalsChristian Poessinger
2021-03-14xml: accel-ppp: move building blocks to subfolderChristian Poessinger
As the amount of include files now has reached a certain amount, it is getting more and more crowsded, thuse introducing "per topic" subdirectories on the filesystem to keep a clean structure makes sense.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 21:26:23 +0000