summaryrefslogtreecommitdiff
path: root/interface-definitions/include/bgp/protocol-common-config.xml.i
AgeCommit message (Collapse)Author
2023-10-30bgp: T5698: add support for EVPN MultihomingChristian Breunig
2023-10-20T5667: BGP label-uniscat enable ecmpfett0
2023-08-07T5446: BGP: change <bgp paramater bestpath med> from node to leafNode, in ↵Nicolas Fort
order to avoid empty value and problems when removing such parameters
2023-07-12bgp: T5338: simplify XML and code handlingChristian Breunig
2023-07-12bgp: T2387: re-use XML building blocks to simplify CLI definitionChristian Breunig
2023-07-12Merge pull request #2085 from aapostoliuk/T5338-sagittaChristian Breunig
bgp: T5338: Added 'protocols bgp interface <int> mpls forwarding' feature
2023-07-11bgp: T5338: Added 'protocols bgp interface <int> mpls forwarding' featureaapostoliuk
Added 'protocols bgp interface <int> mpls forwarding' feature. It is possible to permit BGP install VPN prefixes without transport labels. This configuration will install VPN prefixes originated from an e-bgp session, and with the next-hop directly connected.
2023-07-06bgp: T5343: add ipv4-vpn and ipv6-vpn config options to peer-groupJonathan Voss
2023-05-19T5230: Added missing enforce-first-as option to bgp protocol common config ↵Wered
and frr bgp jinja template.
2023-05-16T5226: Combine ipv4-address and ipv6-address validatorsIndrajit Raychaudhuri
Use a single ip-address validator to combine and replace ipv4-address and ipv6-address validators.
2023-04-27Revert "bgp: T3734: only support "l2vpn-evpn advertise-all-vni" in default VRF"Christian Breunig
This reverts commit bfe57cf80f4c71236f0885408d704a69575f0b30.
2023-04-17bgp: T3734: only support "l2vpn-evpn advertise-all-vni" in default VRFChristian Breunig
2023-04-13T5150: do not apply zebra route-map from routing-daemon config levelChristian Breunig
2023-04-01xml: include building block file name should end with .i and not .inChristian Breunig
2023-03-27bgp: T5114: support configuring TCP keepalive messagesChristian Breunig
2023-03-27bgp: T5114: add "neighbor path-attribute discard"Christian Breunig
2023-03-27bgp: T5114: add peer-group "port" CLI commandChristian Breunig
2023-03-24xml: T5109: use common include file for alpha-numeric, hyphen and underscore ↵Christian Breunig
regex
2023-03-09xml: T4952: improve interface completion helper CLI experienceChristian Breunig
2023-02-08T4977: Add Babel routing protocol supportYuxiang Zhu
This PR adds basic Babel routing protocol support using the implementation in FRR. Signed-off-by: Yuxiang Zhu <vfreex@gmail.com>
2023-02-04bgp: T4817: add local-role (RFC9234) support for peer-groupsChristian Breunig
Extend commit 8a75e92d ("T4817 added support for RFC 9234") to also support peer-groups.
2023-02-04T4817 added support for RFC 9234Kyle McClammy
2022-12-14validators: T4875: use file-path to replace validator 'interface-name'John Estabrook
2022-12-02 T4854: route reflector allows to apply route-mapsfett0
2022-09-15bgp: T4696: add support for "bestpath peer-type multipath-relax"Christian Poessinger
Add new VyOS CLI command: set protocols bgp parameters bestpath peer-type multipath-relax This command specifies that BGP decision process should consider paths from all peers for multipath computation. If this option is enabled, paths learned from any of eBGP, iBGP, or confederation neighbors will be multipath if they are otherwise considered equal cost. [1] [1]: http://docs.frrouting.org/en/stable-8.3/bgp.html#clicmd-bgp-bestpath-peer-type-multipath-relax
2022-07-30bgp: T4257: Changing BGP "local-as" to "system-as"Cheeze_It
bgp: T4257: Changing BGP "local-as" to "system-as" This change is to change the global BGP name for the node "local-as" to "system-as" This is needed so that there's less ambiguity with the local-as feature per neighbor. bgp: T4257: Changing BGP "local-as" to "system-as" bgp: T4257: Changing BGP "local-as" to "system-as" This change is to change the global BGP name for the node "local-as" to "system-as" This is needed so that there's less ambiguity with the local-as feature per neighbor.
2022-06-10xml: drop not always applicable REQUIRED suffix from completion help stringChristian Poessinger
If a parameter is required is determined from the Python string on commit. This "indicator" is not used consistently and sometimes missing, or added where it is not required anymore due to Python script improvement/rewrite.
2022-04-29xml: T4047: use full string match in the regex validatorChristian Poessinger
2022-03-31bgp: T4326: Add bgp parameter no-suppress-duplicatesViacheslav Hletenko
Add new bgp parameter 'no-suppress-duplicates' set protocols bgp parameters no-suppress-duplicates
2022-02-24scripts: T4269: node.def generator should automatically add default valuesChristian Poessinger
Since introducing the XML <defaultValue> node it was common, but redundant, practice to also add a help string indicating which value would be used as default if the node is unset. This makes no sense b/c it's duplicated code/value/characters and prone to error. The node.def scripts should be extended to automatically render the appropriate default value into the CLI help string. For e.g. SSH the current PoC renders: $ cat templates-cfg/service/ssh/port/node.def multi: type: txt help: Port for SSH service (default: 22) val_help: u32:1-65535; Numeric IP port ... Not all subsystems are already migrated to get_config_dict() and make use of the defaults() call - those subsystems need to be migrated, first before the new default is added to the CLI help.
2021-12-12bgp: T4069: add "parameters suppress-fib-pending" CLI optionChristian Poessinger
This command is applicable at the global level and at an individual bgp level. If applied at the global level all bgp instances will wait for fib installation before announcing routes and there is no way to turn it off for a particular BGP vrf.
2021-12-12bgp: T4069: add "parameters shutdown" CLI optionChristian Poessinger
Administrative shutdown of all peers of a bgp instance. Drop all BGP peers, but preserve their configurations. The peers are notified in accordance with RFC 8203 by sending a NOTIFICATION message with error code Cease and subcode Administrative Shutdown prior to terminating connections. This global shutdown is independent of the neighbor shutdown, meaning that individually shut down peers will not be affected by lifting it.
2021-12-12bgp: T4069: add "parameters reject-as-sets" CLI optionChristian Poessinger
This command enables rejection of incoming and outgoing routes having AS_SET or AS_CONFED_SET type.
2021-12-12bgp: T4069: add "parameters minimum-holdtime <n>" CLI optionChristian Poessinger
This command allows user to prevent session establishment with BGP peers with lower holdtime less than configured minimum holdtime. When this command is not set, minimum holdtime does not work.
2021-12-12bgp: T4069: add "parameters fast-convergence" CLI optionChristian Poessinger
Whenever BGP peer address becomes unreachable we must bring down the BGP session immediately. Currently only single-hop EBGP sessions are brought down immediately. IBGP and multi-hop EBGP sessions wait for hold-timer expiry to bring down the sessions. This new configuration option helps user to teardown BGP sessions immediately whenever peer becomes unreachable. This configuration is available at the bgp level. When enabled, configuration is applied to all the neighbors configured in that bgp instance.
2021-12-12bgp: T3967: add "parameters conditional-advertisement timer <n>" optionChristian Poessinger
Set the period to rerun the conditional advertisement scanner process. The default is 60 seconds.
2021-10-04bgp: T3741: "parameter default no-ipv4-unicast" is now a default optionChristian Poessinger
2021-09-25bgp: T3657: add "neighbor fe80::202 interface source-interface 'eth1'" commandChristian Poessinger
2021-09-25bgp: xml: T2387: use "generic-description" building block over BGP specific oneChristian Poessinger
There is no benefit in the BGP specific definition of a "description" node.
2021-08-24bgp: T3759: "l2vpn evpn" and ipv4/ipv6 safi route-targets differChristian Poessinger
The "l2vpn evpn" address-family route-target command only accepts a single route-target value consisting of (A.B.C.D:MN|EF:OPQR|GHJK:MN). The "ipv4-unicast or ipv6-unicast" address-family route-target command for VPNs support multiple, whitespace separated route-target values. This commit adds a new custom validator named "bgp-route-target" with a --single and a --multi option to pass one or more route-target values.
2021-08-20bgp: T3759: add IPv4/IPv6 unicast AFI route-map for VPN import/exportChristian Poessinger
This adds the following new commands: set protocols bgp address-family ipv4-unicast route-map vpn export foo-map-out set protocols bgp address-family ipv4-unicast route-map vpn import foo-map-in set protocols bgp address-family ipv6-unicast route-map vpn export foo-map-out set protocols bgp address-family ipv6-unicast route-map vpn import foo-map-in
2021-08-18bgp: T3759: add l3vpn "route-target vpn" commandsChristian Poessinger
Add the following new commands: * set protocols bgp address-family ipv4-unicast route-target vpn both 1.1.1.1:100 * set protocols bgp address-family ipv4-unicast route-target vpn export 1.1.1.1:100 * set protocols bgp address-family ipv4-unicast route-target vpn import 1.1.1.1:100
2021-08-18bgp: T3759: add l3vpn "rd" route-distinguisher commandsChristian Poessinger
Add the following new commands: * set protocols bgp address-family ipv4-unicast rd vpn export * set protocols bgp address-family ipv6-unicast rd vpn export
2021-08-18bgp: T3759: add l3vpn "label vpn export" commandsChristian Poessinger
Add the following new commands: * set protocols bgp address-family ipv4-unicast label vpn export (auto | 0-1048575) * set protocols bgp address-family ipv6-unicast label vpn export (auto | 0-1048575)
2021-08-18bgp: T3759: import/export is for AFI "ipv4 unicast" not "ipv4 multicast"Christian Poessinger
2021-08-17bgp: T3759: add l3vpn import/export vpn command for IPv4/IPv6 AFIChristian Poessinger
2021-08-17bgp: T2174: create building block for path-limit which is used in IPv4/IPv6 AFIChristian Poessinger
2021-08-11bgp: T3739: add common route-distinguisher XML building blockChristian Poessinger
2021-07-30bgp: T1176: Add solo option for neighborViacheslav
2021-06-16bgp: T3624: add "bandwidth" bestpath optionChristian Poessinger