summaryrefslogtreecommitdiff
path: root/interface-definitions/include/bgp
AgeCommit message (Collapse)Author
2023-03-27bgp: T5114: add "neighbor path-attribute discard"Christian Breunig
2023-03-27bgp: T5114: add peer-group "port" CLI commandChristian Breunig
2023-03-24xml: T5109: use common include file for alpha-numeric, hyphen and underscore ↵Christian Breunig
regex
2023-03-09xml: T4952: improve interface completion helper CLI experienceChristian Breunig
2023-02-08T4977: Add Babel routing protocol supportYuxiang Zhu
This PR adds basic Babel routing protocol support using the implementation in FRR. Signed-off-by: Yuxiang Zhu <vfreex@gmail.com>
2023-02-04bgp: T4817: improve help and constraint error messagesChristian Breunig
2023-02-04bgp: T4817: add local-role (RFC9234) support for peer-groupsChristian Breunig
Extend commit 8a75e92d ("T4817 added support for RFC 9234") to also support peer-groups.
2023-02-04T4817 added support for RFC 9234Kyle McClammy
2022-12-14validators: T4875: use file-path to replace validator 'interface-name'John Estabrook
2022-12-02 T4854: route reflector allows to apply route-mapsfett0
2022-12-02 T4858: Fix l3vpn Route Distinguisher validatorfett0
2022-09-30bgp: evpn: T1315: add route-target CLI node <multi/> propertyChristian Poessinger
FRR supports multiple route-targets to be used for import/export: address-family l2vpn evpn route-target import 20:10 route-target import 20:11 route-target import 20:12 route-target import 40:40 route-target export 1:2 route-target export 1:3 route-target export 40:40 exit-address-family Thus the <multi/> property is added to the relevant CLI nodes.
2022-09-15bgp: T4696: add support for "bestpath peer-type multipath-relax"Christian Poessinger
Add new VyOS CLI command: set protocols bgp parameters bestpath peer-type multipath-relax This command specifies that BGP decision process should consider paths from all peers for multipath computation. If this option is enabled, paths learned from any of eBGP, iBGP, or confederation neighbors will be multipath if they are otherwise considered equal cost. [1] [1]: http://docs.frrouting.org/en/stable-8.3/bgp.html#clicmd-bgp-bestpath-peer-type-multipath-relax
2022-07-30bgp: T4257: Changing BGP "local-as" to "system-as"Cheeze_It
bgp: T4257: Changing BGP "local-as" to "system-as" This change is to change the global BGP name for the node "local-as" to "system-as" This is needed so that there's less ambiguity with the local-as feature per neighbor. bgp: T4257: Changing BGP "local-as" to "system-as" bgp: T4257: Changing BGP "local-as" to "system-as" This change is to change the global BGP name for the node "local-as" to "system-as" This is needed so that there's less ambiguity with the local-as feature per neighbor.
2022-06-10xml: drop not always applicable REQUIRED suffix from completion help stringChristian Poessinger
If a parameter is required is determined from the Python string on commit. This "indicator" is not used consistently and sometimes missing, or added where it is not required anymore due to Python script improvement/rewrite.
2022-04-29xml: T4047: use full string match in the regex validatorChristian Poessinger
2022-04-18bgp: xml: update as-override help stringChristian Poessinger
2022-03-31bgp: T4326: Add bgp parameter no-suppress-duplicatesViacheslav Hletenko
Add new bgp parameter 'no-suppress-duplicates' set protocols bgp parameters no-suppress-duplicates
2022-02-24scripts: T4269: node.def generator should automatically add default valuesChristian Poessinger
Since introducing the XML <defaultValue> node it was common, but redundant, practice to also add a help string indicating which value would be used as default if the node is unset. This makes no sense b/c it's duplicated code/value/characters and prone to error. The node.def scripts should be extended to automatically render the appropriate default value into the CLI help string. For e.g. SSH the current PoC renders: $ cat templates-cfg/service/ssh/port/node.def multi: type: txt help: Port for SSH service (default: 22) val_help: u32:1-65535; Numeric IP port ... Not all subsystems are already migrated to get_config_dict() and make use of the defaults() call - those subsystems need to be migrated, first before the new default is added to the CLI help.
2021-12-12bgp: T3967: add support for conditional advertisementChristian Poessinger
The BGP conditional advertisement feature uses the non-exist-map or the exist-map and the advertise-map keywords of the neighbor advertise-map command in order to track routes by the route prefix. non-exist-map ============= * If a route prefix is not present in the output of non-exist-map command, then advertise the route specified by the advertise-map command. * If a route prefix is present in the output of non-exist-map command, then do not advertise the route specified by the addvertise-map command. exist-map ========= * If a route prefix is present in the output of exist-map command, then advertise the route specified by the advertise-map command. * If a route prefix is not present in the output of exist-map command, then do not advertise the route specified by the advertise-map command. This feature is useful when some prefixes are advertised to one of its peers only if the information from the other peer is not present (due to failure in peering session or partial reachability etc). The conditional BGP announcements are sent in addition to the normal announcements that a BGP router sends to its peer. CLI nodes can be found under: * set protocols bgp neighbor <ip> address-family <afi> conditional-advertisement * set protocols bgp peer-group <p> address-family <afi> conditional-advertisement
2021-12-12xml: bgp: rename afi-common.xml.i -> neighbor-afi-ipv4-ipv6-common.xml.iChristian Poessinger
2021-12-12bgp: T4069: add "parameters suppress-fib-pending" CLI optionChristian Poessinger
This command is applicable at the global level and at an individual bgp level. If applied at the global level all bgp instances will wait for fib installation before announcing routes and there is no way to turn it off for a particular BGP vrf.
2021-12-12bgp: T4069: add "parameters shutdown" CLI optionChristian Poessinger
Administrative shutdown of all peers of a bgp instance. Drop all BGP peers, but preserve their configurations. The peers are notified in accordance with RFC 8203 by sending a NOTIFICATION message with error code Cease and subcode Administrative Shutdown prior to terminating connections. This global shutdown is independent of the neighbor shutdown, meaning that individually shut down peers will not be affected by lifting it.
2021-12-12bgp: T4069: add "parameters reject-as-sets" CLI optionChristian Poessinger
This command enables rejection of incoming and outgoing routes having AS_SET or AS_CONFED_SET type.
2021-12-12bgp: T4069: add "parameters minimum-holdtime <n>" CLI optionChristian Poessinger
This command allows user to prevent session establishment with BGP peers with lower holdtime less than configured minimum holdtime. When this command is not set, minimum holdtime does not work.
2021-12-12bgp: T4069: add "parameters fast-convergence" CLI optionChristian Poessinger
Whenever BGP peer address becomes unreachable we must bring down the BGP session immediately. Currently only single-hop EBGP sessions are brought down immediately. IBGP and multi-hop EBGP sessions wait for hold-timer expiry to bring down the sessions. This new configuration option helps user to teardown BGP sessions immediately whenever peer becomes unreachable. This configuration is available at the bgp level. When enabled, configuration is applied to all the neighbors configured in that bgp instance.
2021-12-12bgp: T3967: add "parameters conditional-advertisement timer <n>" optionChristian Poessinger
Set the period to rerun the conditional advertisement scanner process. The default is 60 seconds.
2021-12-12xml: bgp: fix "shutdown" help string (remove whitespace)Christian Poessinger
2021-12-09bgp: T4058: add support for BFD profilesChristian Poessinger
2021-12-04bgp: T4042: bugfix route-distinguisher value rangeChristian Poessinger
2021-12-04validators: T4042: rename bgp-route-target -> bgp-rd-rtChristian Poessinger
2021-11-19conf-mode:T3998:bgp route-target completion incorrect descriptionsrividya0208
Corrected the help description for route target from "Specify route distinguisher" to "Specify route target list"
2021-10-26bgp: T3945: Add route-map for aggregate-addressViacheslav
2021-10-04bgp: T3741: "parameter default no-ipv4-unicast" is now a default optionChristian Poessinger
2021-09-25bgp: T3657: add "neighbor fe80::202 interface source-interface 'eth1'" commandChristian Poessinger
2021-09-25bgp: xml: T2387: use "generic-description" building block over BGP specific oneChristian Poessinger
There is no benefit in the BGP specific definition of a "description" node.
2021-09-04bgp: T3798: "replace-as" option can only be used when "no-prepend" is definedChristian Poessinger
Commit 5f1c1ae4 ("bgp: T3798: add support for neighbor local-as <n> replace-as") added support for a new CLI option when the local-as is changed for a specified neighbor or peer-group. There was an error in the CLI / design as the "replace-as" option can only be used when "no-prepend" is defined. Thus "no-prepend" became a <node> and the new "replace-as" leafNode is now a child of "no-prepend".
2021-09-03bgp: T3798: add support for neighbor local-as <n> replace-asChristian Poessinger
2021-08-24bgp: T3759: "l2vpn evpn" and ipv4/ipv6 safi route-targets differChristian Poessinger
The "l2vpn evpn" address-family route-target command only accepts a single route-target value consisting of (A.B.C.D:MN|EF:OPQR|GHJK:MN). The "ipv4-unicast or ipv6-unicast" address-family route-target command for VPNs support multiple, whitespace separated route-target values. This commit adds a new custom validator named "bgp-route-target" with a --single and a --multi option to pass one or more route-target values.
2021-08-20bgp: T3759: add IPv4/IPv6 unicast AFI route-map for VPN import/exportChristian Poessinger
This adds the following new commands: set protocols bgp address-family ipv4-unicast route-map vpn export foo-map-out set protocols bgp address-family ipv4-unicast route-map vpn import foo-map-in set protocols bgp address-family ipv6-unicast route-map vpn export foo-map-out set protocols bgp address-family ipv6-unicast route-map vpn import foo-map-in
2021-08-20bgp: T3759: fix DOS -> UNIX line endings on route-target building blocksChristian Poessinger
2021-08-20bgp: T3759: create common export/import building block for re-usable route-mapsChristian Poessinger
2021-08-18bgp: T3759: add l3vpn "route-target vpn" commandsChristian Poessinger
Add the following new commands: * set protocols bgp address-family ipv4-unicast route-target vpn both 1.1.1.1:100 * set protocols bgp address-family ipv4-unicast route-target vpn export 1.1.1.1:100 * set protocols bgp address-family ipv4-unicast route-target vpn import 1.1.1.1:100
2021-08-18bgp: evpn: T1513: re-structure route-target XML blocksChristian Poessinger
Make the both, export and import XML block re-usable by the IPv4 AFI.
2021-08-18bgp: T3759: fix "label vpn" help stringChristian Poessinger
2021-08-18bgp: T3759: add l3vpn "rd" route-distinguisher commandsChristian Poessinger
Add the following new commands: * set protocols bgp address-family ipv4-unicast rd vpn export * set protocols bgp address-family ipv6-unicast rd vpn export
2021-08-18bgp: T3759: add l3vpn "label vpn export" commandsChristian Poessinger
Add the following new commands: * set protocols bgp address-family ipv4-unicast label vpn export (auto | 0-1048575) * set protocols bgp address-family ipv6-unicast label vpn export (auto | 0-1048575)
2021-08-18bgp: T3759: import/export is for AFI "ipv4 unicast" not "ipv4 multicast"Christian Poessinger
2021-08-17bgp: T3759: add l3vpn "import vrf" commandsChristian Poessinger
2021-08-17bgp: T3759: add l3vpn import/export vpn command for IPv4/IPv6 AFIChristian Poessinger