summaryrefslogtreecommitdiff
path: root/interface-definitions/include/firewall
AgeCommit message (Collapse)Author
2022-09-26T4700: Firewall: add interface matching criteriaNicolas Fort
2022-09-22xml: T4698: validating a range must be explicitly enabled in the validatorChristian Poessinger
This extends commit 28573ffe4f ("xml: T4698: drop validator name="range" and replace it with numeric"). The first version allowed both a range and discrete numbers to be validated by the numeric validator. This had a flaw as both 22 and 22-30 were valid at the same time. The generic "port-number.xml.i" building block only allows a discrete number. Now if a user set port 22-30 for e.g. SSH the daemon did no longer start. This is why range validation must be explicitly enabled.
2022-09-21T4699: Firewall: Add return action, since jump action was added recentlyNicolas Fort
2022-09-17Merge pull request #1546 from nicolas-fort/fwall-jumpChristian Poessinger
T4699: Firewall: Add jump action in firewall ruleset
2022-09-16T4699: Firewall: Add jump action in firewall rulestNicolas Fort
2022-09-16xml: T4698: drop validator name="range" and replace it with numericChristian Poessinger
After T4669 added support for range validation to the OCaml validator there is no need to keep the slow Python validator in place. Raplace all occurances of <validator name="range" argument="--min=1 --max=65535"/> with <validator name="numeric" argument="--range 1-65535"/>.
2022-09-13firewall: T2199: Refactor firewall + zone-policy, move interfaces under ↵sarthurdev
firewall node * Refactor firewall and zone-policy rule creation and cleanup * Migrate interface firewall values to `firewall interfaces <name> <direction> name/ipv6-name <name>` * Remove `firewall-interface.py` conf script
2022-09-07T1024: Firewall and Policy route: add option to match dscp value, both on ↵Nicolas Fort
firewall and in policy route
2022-09-06T4670: policy route: extend matching criteria for policy route and route6. ↵Nicolas Fort
Matching criteria added: ttl/hoplimit and packet-length
2022-09-03firewall: T4651: re-implement packet-length CLI option to use <multi/>Christian Poessinger
2022-09-03firewall: T3568: improve default-action help stringChristian Poessinger
2022-09-03firewall: T3568: add XML include block for eq,gt,lt optionsChristian Poessinger
2022-09-02Merge branch 'T4651' of https://github.com/nicolas-fort/vyos-1x into firewallChristian Poessinger
* 'T4651' of https://github.com/nicolas-fort/vyos-1x: Firewall: T4651: Change proposed cli from ip-length to packet-length Firewall: T4651: Add options to match packet size on firewall rules.
2022-09-01Firewall: T4651: Change proposed cli from ip-length to packet-lengthNicolas Fort
2022-08-30firewall: T4655: implement XML defaultValue for name and ipv6-nameChristian Poessinger
This extends the implementation of commit 0cc7e0a49094 ("firewall: T4655: Fix default action 'drop' for the firewall") in a way that we can now also use the XML <defaultValue> node under "firewall name" and "firewall ipv6-name". This is a much cleaner approach which also adds the default value automatically to the CLIs completion helper ("?").
2022-08-30firewall: T3568: rename XML building blocks to match CLI node nameChristian Poessinger
2022-08-18firewall: T4622: Add TCP MSS optionViacheslav Hletenko
Ability to drop|accept packets based on TCP MSS size set firewall name <tag> rule <tag> tcp mss '501-1460'
2022-07-04firewall: T4299: Add ability to inverse match country codessarthurdev
2022-06-11firewall: T4299: Add support for GeoIP filteringsarthurdev
2022-06-10xml: drop not always applicable REQUIRED suffix from completion help stringChristian Poessinger
If a parameter is required is determined from the Python string on commit. This "indicator" is not used consistently and sometimes missing, or added where it is not required anymore due to Python script improvement/rewrite.
2022-06-10Merge pull request #1322 from nicolas-fort/T3907-fwall-logDaniil Baturin
Firewall: T3907: add log-level options in firewall
2022-05-28firewall: T970: Add firewall group domain-groupViacheslav Hletenko
Domain group allows to filter addresses by domain main Resolved addresses as elements are stored to named "nft set" that used in the nftables rules Also added a dynamic "resolver" systemd daemon vyos-domain-group-resolve.service which starts python script for the domain-group addresses resolving by timeout 300 sec set firewall group domain-group DOMAINS address 'example.com' set firewall group domain-group DOMAINS address 'example.org' set firewall name FOO rule 10 action 'drop' set firewall name FOO rule 10 source group domain-group 'DOMAINS' set interfaces ethernet eth0 firewall local name 'FOO' nft list table ip filter table ip filter { set DOMAINS { type ipv4_addr flags interval elements = { 192.0.2.1, 192.0.2.85, 203.0.113.55, 203.0.113.58 } } chain NAME_FOO { ip saddr @DOMAINS counter packets 0 bytes 0 drop comment "FOO-10" counter packets 0 bytes 0 return comment "FOO default-action accept" } }
2022-05-27Firewall: T3907: Revert migration script 6-to-7 and add new 7-to-8Nicolas Fort
2022-05-11Firewall: T3907: add log-level options in firewallNicolas Fort
2022-05-09Merge pull request #1279 from nicolas-fort/T990Christian Poessinger
Firewall: T990: Add snat and dnat connection status on firewall
2022-04-29xml: T4047: use full string match in the regex validatorChristian Poessinger
2022-04-23Firewall: T990: Modifications for new connection-status cliNicolas Fort
2022-04-11Firewall: T990: Add snat and dst connection status on firewallNicolas Fort
2022-04-08Firewall: T990: Add snat and dnat connection status on firewallNicolas Fort
2022-04-06firewall: T4345: Fix incorrect rule limit rate syntaxsarthurdev
2022-02-24scripts: T4269: node.def generator should automatically add default valuesChristian Poessinger
Since introducing the XML <defaultValue> node it was common, but redundant, practice to also add a help string indicating which value would be used as default if the node is unset. This makes no sense b/c it's duplicated code/value/characters and prone to error. The node.def scripts should be extended to automatically render the appropriate default value into the CLI help string. For e.g. SSH the current PoC renders: $ cat templates-cfg/service/ssh/port/node.def multi: type: txt help: Port for SSH service (default: 22) val_help: u32:1-65535; Numeric IP port ... Not all subsystems are already migrated to get_config_dict() and make use of the defaults() call - those subsystems need to be migrated, first before the new default is added to the CLI help.
2022-02-04firewall: T4209: Fix support for rule `recent` matchessarthurdev
2022-01-21Firewall: T4186: Adding icmpv6 corrections, in corcondancy of what was done ↵Nicolas Fort
for icmp
2022-01-21Firewall: T4186: typo correction on address-mask-reply descriptionNicolas Fort
2022-01-21Firewall: T4186: Correct icmp type-name options for firewall rulesNicolas Fort
2022-01-18firewall: T3560: Add support for MAC address groupssarthurdev
2022-01-17firewall: policy: T4178: Migrate and refactor tcp flagssarthurdev
* Add support for ECN and CWR flags
2022-01-14firewall: T4178: Use lowercase for TCP flags and add an validatorsarthurdev
2022-01-10firewall: validators: T2199: Improve port validationsarthurdev
2022-01-07xml: firewall: T4130: add protocol completion helper all and tcp_udpChristian Poessinger
2022-01-04firewall: T4134: Fix completion help for protocolsViacheslav
2021-12-06firewall: T2199: Migrate firewall to XML/Pythonsarthurdev
2021-08-29xml: add missing "u32:" value declarator on integer rangesChristian Poessinger
2021-07-02xml: provide building block for a generic description nodeChristian Poessinger
2021-05-25firewall: T3568: add XML definitions for firewallViacheslav Hletenko
Add XML for configuration mode firewall. Used for future rewriting it to Python style.