summaryrefslogtreecommitdiff
path: root/interface-definitions/include/version
AgeCommit message (Collapse)Author
2023-12-30firewall: T5834: Migration for 'enable-default-log' to 'default-log'Indrajit Raychaudhuri
(cherry picked from commit 7c40b70af9def9242b30d1fc949288d9da2bd027)
2023-12-30system: T5877: Shorten system domain-search config pathIndrajit Raychaudhuri
Shorten and simplify `system domain-search` config path from: ``` set system domain-search domain <domain1> ``` to: ``` set system domain-search <domain1> ``` This will shorten the path and also make consistent with `domain-search` config in other places (like `dhcp-server`). (cherry picked from commit f77bf573c608b6c09182e1bad4312c4dd1e5195e)
2023-12-28accel-ppp: T5688: Standardized pool configuration in accel-pppaapostoliuk
Standardized pool configuration for all accel-ppp services. 1. Only named pools are used now. 2. Allows all services to use range in x.x.x.x/mask and x.x.x.x-x.x.x.y format 3. next-pool can be used in all services 2. Allows to use in ipoe gw-ip-address without pool configuration which allows to use Fraimed-IP-Address attribute by radius. 3. Default pool name should be explicidly configured with default-pool. 4. In ipoe netmask and range subnet can be different. (cherry picked from commit 422eb463d413da812eabc28706e507a9910d7b53)
2023-12-25snmp: T5855: migrate "set service lldp snmp enable" to "set service lldp snmp"Christian Breunig
(cherry picked from commit a9201e77110ce0695e2ba879304aef41b7ac9a0c)
2023-12-21T2898: add ndp-proxy serviceChristian Breunig
VyOS CLI command set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static' Will generate the following NDP proxy configuration $ cat /run/ndppd/ndppd.conf # autogenerated by service_ndp-proxy.py # This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route route-ttl 30000 # This sets up a listener, that will listen for any Neighbor Solicitation # messages, and respond to them according to a set of rules proxy eth0 { # Turn on or off the router flag for Neighbor Advertisements router no # Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds) timeout 500 # Control how long a valid or invalid entry remains in the cache (milliseconds) ttl 30000 # This is a rule that the target address is to match against. If no netmask # is provided, /128 is assumed. You may have several rule sections, and the # addresses may or may not overlap. rule 2001:db8::/64 { static } } (cherry picked from commit 4d721a58020971d00ab854c37b68e88359999f9c)
2023-12-05ddclient: T5791: Migration script for dynamic dns config path changeIndrajit Raychaudhuri
2023-11-30ddclient: T5708: Migrate `timeout` to `interval`Indrajit Raychaudhuri
Time interval in seconds to wait between DNS updates would be a bit more intuitive as `interval` than `timeout`.
2023-11-20http: T5762: api: make API socket backend communication the one and only defaultChristian Breunig
Why: Smoketests fail as they can not establish IPv6 connection to uvicorn backend server. https://github.com/vyos/vyos-1x/pull/2481 added a bunch of new smoketests. While debugging those failing, it was uncovered, that uvicorn only listens on IPv4 connections vyos@vyos# netstat -tulnp | grep 8080 (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN - As the CLI already has an option to move the API communication from an IP to a UNIX domain socket, the best idea is to make this the default way of communication, as we never directly talk to the API server but rather use the NGINX reverse proxy. (cherry picked from commit f5e43b1361fb59a9c260739bdb28729d5119507c)
2023-11-15igmp: T5736: migrate "protocols igmp" to "protocols pim"Christian Breunig
IGMP and PIM are two different but related things. FRR has both combined in pimd. As we use get_config_dict() and FRR reload it is better to have both centrally stored under the same CLI node (as FRR does, too) to just "fire and forget" the commit to the daemon. "set protocols igmp interface eth1" -> "set protocols pim interface eth1 igmp" (cherry picked from commit bc83fb097719f5c4c803808572f690fbc367b9e5)
2023-11-14T5729: T5590: T5616: backport to sagita fwall marks, fix on firewall logs ↵Nicolas Fort
parsing, and migration to valueless node for log and state matchers
2023-11-01T5681: Firewall,Nat and Nat66: simplified and standarize interface matcher ↵Nicolas Fort
firewal, nat and nat66. (cherry picked from commit 51abbc0f1b2ccf4785cf7f29f1fe6f4af6007ee6)
2023-10-22Merge branch 'sagitta' into mergify/bp/sagitta/pr-2386Christian Breunig
2023-10-22bonding: T5254: Fixed changing ethernet when it is a bond memberaapostoliuk
If ethernet interface is a bond memeber: 1. Allow for changing only specific parameters which are specified in EthernetIf.get_bond_member_allowed_options function. 2. Added inheritable parameters from bond interface to ethernet interface which are scpecified in BondIf.get_inherit_bond_options. Users can change inheritable options under ethernet interface but in commit it will be copied from bond interface. 3. All other parameters are denied for changing. Added migration script. It deletes all denied parameters under ethernet interface if it is a bond member. (cherry picked from commit aa0282ceb379df1ab3cc93e4bd019134d37f0d89)
2023-10-22vxlan: T5671: change port to IANA assigned default portChristian Breunig
Currently VyOS VXLAN implementation uses the Linux assigned port 8472 that predates the IANA assignment. As Most other vendors use the IANA assigned port, follow this guideline and use the new default port 4789. Existing configuration not defining an explicit port number will be migrated to the old default port number of 8472, keeping existing configurations work! (cherry picked from commit 6db8d3ded19f652b99231be0d705d76b598ac72a) # Conflicts: # interface-definitions/include/version/interfaces-version.xml.i
2023-10-19cluster: T2897: add a migration script for converting cluster to VRRPDaniil Baturin
(cherry picked from commit 4c4c2b1f8a58398798f20c252bde80461320d330)
2023-10-02T5165: Migrate policy local-route rule x destination to addressViacheslav Hletenko
Migrate policy local-route <destination|source> to node address replace 'policy local-route{v6} rule <tag> destination|source <x.x.x.x>' => 'policy local-route{v6} rule <tag> destination|source address <x.x.x.x>' (cherry picked from commit 9f7a5f79200782f7849cab72f55a39dedf45f214)
2023-08-11T5160: firewall refactor: new cli structure. Update only all xmlNicolas Fort
2023-08-02wireguard: T5413: Blocked adding the peer with the router's public keyaapostoliuk
Disabeled adding the peer with the same public key as the router has. Added smoketest
2023-07-26Merge pull request #2078 from nicolas-fort/T5154Viacheslav Hletenko
T5154: NTP: allow maximum of one ipv4 and one ipv6 address on paramet…
2023-07-25T5154: NTP: allow maximum of one ipv4 and one ipv6 address on parameter ↵Nicolas Fort
<listen-address>. Also allow only one single value <interface>.
2023-07-11T5341: HA migrate virtual-server tag to node addressViacheslav Hletenko
Migrate: high-availability virtual-server 203.0.113.1 to: high-availability virtual-server <name> address 203.0.113.1
2023-06-12T5286: drop XDP support for ethernet and bonding interfacesChristian Breunig
... this is a step towards a new and better implementation that will utilize VPP.
2023-06-04dns: T5144: Apply migration for dynamic dns path updateIndrajit Raychaudhuri
Create migration and bump package version from 0 -> 1 for dynamic dns
2023-05-09Merge pull request #1985 from c-po/t2778-syslogChristian Breunig
syslog: T2778: T2769: refactoring and VRF support
2023-05-08syslog: T2778: migrate to get_config_dict()Christian Breunig
2023-05-08T4780: bump firewall version 9 -> 10Christian Breunig
2023-04-13T5150: migrate CLI configs to new Kernel/Zebra route-map supportChristian Breunig
2023-03-29T5115: bump version dns-forwarding 3 -> 4Christian Breunig
2023-02-25tunnel: T5034: migrate "multicast enable" CLI node to enable-multicastChristian Breunig
Tunnel interface multicast settings can be "enabled or disabled". As we prefer valueless nodes, and the linux kernel default is "disabled" we should add a set interfaces tunnel tunXX enable-multicast command
2023-02-15ipsec: T4593: Migrate and remove legacy `include-ipsec` nodessarthurdev
Not supported with swanctl
2023-02-10interfaces: T4995: rename user -> username CLI node for pppoe, wwan and ↵Christian Breunig
sstp-client
2023-01-30Merge pull request #1761 from sever-sever/T4916-currViacheslav Hletenko
T4916: Rewrite IPsec peer authentication and psk migration
2023-01-26T4916: Rewrite IPsec peer authentication and psk migrationViacheslav Hletenko
Rewrite strongswan IPsec authentication to reflect structure from swanctl.conf The most important change is that more than one local/remote ID in the same auth entry should be allowed replace: 'ipsec site-to-site peer <tag> authentication pre-shared-secret xxx' => 'ipsec authentication psk <tag> secret xxx' set vpn ipsec authentication psk <tag> id '192.0.2.1' set vpn ipsec authentication psk <tag> id '192.0.2.2' set vpn ipsec authentication psk <tag> secret 'xxx' set vpn ipsec site-to-site peer <tag> authentication local-id '192.0.2.1' set vpn ipsec site-to-site peer <tag> authentication mode 'pre-shared-secret' set vpn ipsec site-to-site peer <tag> authentication remote-id '192.0.2.2' Add template filter for Jinja2 'generate_uuid4'
2023-01-19Merge pull request #1697 from nicolas-fort/snmp_reworkChristian Breunig
T4857: SNMP: Implement FRR SNMP Recomendations
2023-01-18T4857: change description in cli, and change word oid to uppercase OIDs in ↵Nicolas Fort
warning message
2023-01-14ntp: T3008: migrate from ntpd to chronyChristian Breunig
* Move CLI from "system ntp" -> "service ntp" * Drop NTP server option preempt as not supported by chrony
2023-01-01qos: T4284: first implementation introducing a new vyos.qos moduleChristian Poessinger
2022-12-23container: T4870: bump package version 0 -> 1 for filesystem changeChristian Poessinger
move from vfs to overlay driver The following pre iage upgrade script must be executed to have containers after the reboot: for pod in $(cli-shell-api listActiveNodes container name); do systemctl stop vyos-container-${pod//\'}.service done sed -i 's/vfs/overlay/g' /etc/containers/storage.conf /usr/share/vyos/templates/container/storage.conf.j2 rm -rf /usr/lib/live/mount/persistence/container/storage/libpod for pod in $(cli-shell-api listActiveNodes container name); do image=$(cli-shell-api returnActiveValue container name ${pod//\'} image) podman image pull $image systemctl start vyos-container-${pod//\'}.service done for dir in vfs vfs-containers vfs-images vfs-layers; do rm -rf /usr/lib/live/mount/persistence/container/storage/$dir done
2022-12-17Merge pull request #1626 from nicolas-fort/fwall_group_interfaceChristian Poessinger
T4780: Firewall: add firewall groups in firewall. Extend matching cri…
2022-11-19T4780: Firewall: add firewall groups in firewall. Extend matching criteria ↵Nicolas Fort
so this new group can be used in inbound and outbound matcher
2022-11-11policy: T2199: T4605: Migrate policy route interface to `policy route|route6 ↵sarthurdev
<name> interface <ifname>` * Include refactor to policy route to allow for deletion of mangle table instead of complex cleanup * T4605: Rename mangle table to vyos_mangle
2022-10-21graphql: T4768: change name of api child node from 'gql' to 'graphql'John Estabrook
2022-10-11isis: T4739: ISIS segment routing being refactoredCheeze_It
This is to refactor ISIS segment routing to match up with OSPF segment routing.
2022-10-03policy: T4660: Changed CLI syntax in route-map set communityaapostoliuk
Changed CLI syntax in route-map set community, set large-community, set extcommunity Allows to add multiple communities, large-communities and extcommunities in clear view. Added new well-known communities. Added non-transitive feature in extcommunities. Fixed community's validators.
2022-09-26Merge pull request #1545 from sever-sever/T4557Christian Poessinger
ids: T4557: Migrate threshold and add new threshold types
2022-09-26ids: T4557: Migrate threshold and add new threshold typesViacheslav Hletenko
Migrate "service ids ddos-protection threshold xxx" to "service ids ddos-protection general threshold xxx" Add new threshold types: set service ids ddos-protection threshold tcp xxx set service ids ddos-protection threshold udp xxx set service ids ddos-protection threshold icmp xxx
2022-09-17pppoe-server: T4703: combine vlan-id and vlan-range into single CLI nodeChristian Poessinger
The initial Accel-PPP PPPoE implementation used: set service pppoe-server interface <name> vlan-id <id> set service pppoe-server interface <name> vlan-range <start-stop> This is actually a duplicated CLI node.
2022-09-16Merge pull request #1463 from sever-sever/T4118Daniil Baturin
ipsec: T4118: Change vpn ipsec syntax for IKE ESP and peer
2022-09-16ipsec: T4118: Change vpn ipsec syntax for IKE ESP and peerViacheslav Hletenko
Migration and Change boolean nodes "enable/disable" to disable-xxxx, enable-xxxx and just xxx for VPN IPsec configurations - IKE changes: - replace 'ipsec ike-group <tag> mobike disable' => 'ipsec ike-group <tag> disable-mobike' - replace 'ipsec ike-group <tag> ikev2-reauth yes|no' => 'ipsec ike-group <tag> ikev2-reauth' - ESP changes: - replace 'ipsec esp-group <tag> compression enable' => 'ipsec esp-group <tag> compression' - PEER changes: - replace: 'peer <tag> id xxx' => 'peer <tag> local-id xxx' - replace: 'peer <tag> force-encapsulation enable' => 'peer <tag> force-udp-encapsulation' - add option: 'peer <tag> remote-address x.x.x.x' Add 'peer <name> remote-address <name>' via migration script
2022-09-13firewall: T2199: Refactor firewall + zone-policy, move interfaces under ↵sarthurdev
firewall node * Refactor firewall and zone-policy rule creation and cleanup * Migrate interface firewall values to `firewall interfaces <name> <direction> name/ipv6-name <name>` * Remove `firewall-interface.py` conf script