summaryrefslogtreecommitdiff
path: root/interface-definitions/include
AgeCommit message (Collapse)Author
2020-09-20wwan: ifconfig: T2905: sync CLI nodes in dialup interfacesChristian Poessinger
Both PPPoE and WWAN interfaces are dialer interfaces handled by ppp, but use different CLI nodes for the same functionality. PPPoE has "connect-on-demand" to initiate an "on-demand" dialing and WWAN uses "ondemand" for this purpose. Rename WWAN "ondemand" node to "connect-on-demand".
2020-09-20vif-s: ifconfig: T2903: use explicit VLAN protocol over raw numbersChristian Poessinger
In the past we had to provide the ethertype value used for the VLAN protocol (0x88A8 -> 802.1ad or 0x8100 -> 802.1q). This should be changed to a more user friendly CLI node (protocol over ethertype) and 802.1ad over it's raw value 0x88A8. There is no need in presenting RAW information from the ethernet header to the user. Also iproute2 calls it protocol which makes way more sense over the "raw" value.
2020-08-23dhcpv6-pd: T2677: add support for rapid-commit optionChristian Poessinger
When rapid-commit is specified, dhcp6c will include a rapid-commit option in solicit messages and wait for an immediate reply instead of advertisements.
2020-08-22dhcpv6-pd: T2677: optimize CLI interface for PD configurationChristian Poessinger
The current CLI did not support multiple prefix-delegations per interface. Some ISPs only send one /64 to a client per prefix-delegation request, but they allow the customer to request multiple prefixes. The 'dhcpv6-options prefix-delegation' node has been renamed and converted to a tag node named 'dhcpv6-options pd'. The tag node specifies a PD request (>=0). In the past the user needed to know what prefix will be assigned and required to calculate the sla-len by himself. The 'sla-len' node was dropped and is now calculated in the background from the 'dhcpv6-options pd 0 length' node. It is no longer mandatory to supply the 'sla-id' node, if sla-id is not specified it is 'guessed' by counting upwards. Example configuration: ---------------------- ethernet eth1 { address dhcpv6 dhcpv6-options { pd 0 { length 56 interface eth2 { address 1 } } } } This will request a /56 assignment from the ISP and will delegate a /64 network to interface eth2. VyOS will use the interface address ::1 on the delegate interface (eth2) as its local address.
2020-08-06nat: T2764: increase maximum rule number to 999999Jernej Jakob
2020-08-04cleanup: convert multiple files from DOS to UNIX line endingChristian Poessinger
2020-08-02accel-ppp: T2756: make RADIUS accounting port configurableChristian Poessinger
Make the port used for RADIUS accounting user configurable. This is now valid for the following services which are based on Accel-PPP: * ipoe-server * pppoe-server * l2tp * pptp * sstp
2020-07-25ifconfig: T2653: set arp-cache-timeout default value of 30msChristian Poessinger
2020-07-15http-client: T2651: support specifying source-interface/address for curlChristian Poessinger
Please note that either interface or address can be configured. system { options { http-client { source-interface eth0 source-address 1.1.1.1 } } }
2020-07-15xml: T2651: provide general source-interface include fileChristian Poessinger
2020-07-12nat: T2699: rename interface includeChristian Poessinger
2020-06-27xml: include: mtu: add default MTU 1500 bytesChristian Poessinger
2020-06-23tunnel: T2633: add support for ip (arp) commandsThomas Mangin
2020-06-17login: radius: T2299: Move RADIUS priority XML definitions to system-login.xmlDmitriyEshenko
2020-06-17login: radius: T2299: Implement RADIUS servers priorityDmitriyEshenko
2020-06-06isis: T2495: add XML definitions for "protocol isis"Viacheslav Hletenko
2020-06-05T2548: interface address does not support IP network definitionChristian Poessinger
When migrating all single instances of the IP address XML definition to the reusable include file an error was ported, too. This allowed an interface be assigned an IPv4/IPv6 network address es e.g. 192.0.2.0/24 which is invalid. The validator has been fixed to only allow IPv4/IPv6 host addresses instead.
2020-06-04rip-xml: T2547: XML for conf-mode protocol RIPsever-sever
2020-06-01bgp: T2387: move "aggregate address" to XML includeChristian Poessinger
2020-05-26dhcpv6-pd: pppoe: T2506: restructure CLIChristian Poessinger
Rename the CLI nodes for prefix delegation from "dhcpv6-options delegate <interface>" to "dhcpv6-options prefix-delegation interface <interface>". The change is required to add the possibility to request for specific prefix sized via the CLI. That option was not possible with the old configuration tree.
2020-05-24fromdos: fix wrong line encodingChristian Poessinger
2020-05-20macvlan: T2023: prepare common source interface include fileChristian Poessinger
2020-05-19Merge pull request #378 from sever-sever/bgp-xml-confChristian Poessinger
bgp-xml: T2387:Commands in XML for [conf_mode] bgp
2020-05-19dhcpv6-pd: T421: support ethernet based interfacesChristian Poessinger
Add support for prefix delegation when receiving the prefix via ethernet, bridge, bond, wireless.
2020-05-19bgp-xml: T2387:Commands in XML for [conf_mode] bgpsever-sever
2020-05-17xml: split dhcp, dhcpv6 to individual filesChristian Poessinger
2020-05-16nat: nptv6: T2198: add XML/Python skeletonChristian Poessinger
- define XML CLI interface - read CLI into Python dict
2020-05-16nat: T2198: add common ip-protocol validatorChristian Poessinger
It allows IP protocol numbers 0-255, protocol names e.g. tcp, ip, ipv6 and the negated form with a leading "!".
2020-05-16nat: T2198: add protocol completion helper and regex constraintChristian Poessinger
2020-05-16nat: T2198: split nat-address-port include into individual filesChristian Poessinger
2020-05-16nat: T2198: add ipv4-{address,prefix,rage}-exclude validatorsChristian Poessinger
Exclude validators are required to support the ! (not) operator on the CLI to exclude addresses from NAT.
2020-05-16nat: T2198: initial XML and Python representationChristian Poessinger
2020-04-23interfaces: T2362: add node to delete the default IPv6 link-local addressJernej Jakob
2020-04-23interfaces: T2362: allow setting multiple 'ipv6 address eui64'Jernej Jakob
2020-04-22accel-ppp: provide common wins-server include definitionChristian Poessinger
2020-04-21accel-ppp: unify "authentication mode" XML definition to common include fileChristian Poessinger
2020-04-21dhcpv6: T2341: remove obsolete priority causing priority inversionChristian Poessinger
2020-04-19xml: T2337: bugfix on missing hw-id nodeChristian Poessinger
Commit 021a2470bd67 ("XML: T2282: clarify on ethernet and wireless hw-id nodes") created a common XML include file out of the MAC address include file which totally blew everything as we now have two "mac" nodes as it was not renamed to "hw-id".
2020-04-19{pppoe,ipoe}-server: T2324: T2314: migrate to common accel-name-server XMLChristian Poessinger
2020-04-19pppoe-server: T2314: add common accel-radius-additions XML fileChristian Poessinger
2020-04-18pppoe-server: T2314: migrate IPv6 to common CLI nodes with embeeded validationChristian Poessinger
2020-04-13XML: T2282: clarify on ethernet and wireless hw-id nodesChristian Poessinger
2020-04-10vif-c: T2240: add VRF supportChristian Poessinger
2020-04-10Revert "vif-s: T2240: add VRF support"Christian Poessinger
This reverts commit 2d33cf656f5856fb06e8390fc2250bb99ea0206b.
2020-04-09xml: radius: update source-address valueHelpChristian Poessinger
2020-04-08vif-s: T2240: add VRF supportChristian Poessinger
2020-04-08wireguard: T2244: split port configuration to XML include fileChristian Poessinger
2020-03-28ipv6: T1831: migrate eui64 addressing to XML and pythonChristian Poessinger
2020-03-28ipv6: T1831: migrate autoconf nodeChristian Poessinger
Autoconfigure addresses using Prefix Information in Router Advertisements.
2020-03-28ipv6: T1831: migrate forwarding and dup-addr-detect-transmits nodesChristian Poessinger
... to new XML and Python based frontend/backend.