| Age | Commit message (Collapse) | Author |
|---|
|
* https://github.com/Cheeze-It/vyos-1x:
bgp: T4257: Changing BGP "local-as" to "system-as"
|
|
Ability to get MTU from DHCP-server and don't touch it per
any interface change if interface 'dhcp-options mtu' is
configured
|
|
bgp: T4257: Changing BGP "local-as" to "system-as"
This change is to change the global BGP name for the node "local-as" to "system-as"
This is needed so that there's less ambiguity with the local-as feature per neighbor.
bgp: T4257: Changing BGP "local-as" to "system-as"
bgp: T4257: Changing BGP "local-as" to "system-as"
This change is to change the global BGP name for the node "local-as" to "system-as"
This is needed so that there's less ambiguity with the local-as feature per neighbor.
|
|
lb-wan: T4518: Add XML for conf mode load-balancing wan
|
|
Directed broadcast is described in rfc1812#section-5.3.5.2 and rfc2644.
By default Linux kernel doesn't forward directed broadcast
packets unless both of `/proc/sys/net/ipv4/conf/all/bc_forwarding`
and `/proc/sys/net/ipv4/conf/$iface/bc_forwarding` are set to 1.
|
|
Add XML for configuration mode "load-balancing wan" for the future
rewriting this to Python
Remove node from Makefile as Python code is not yet completed
|
|
As we have specific configuration for each plugin:
set service monitoring telegraf xxx
- azure-data-explorer
- prometheus-client
- splunk
We should to move configuration that related to influxdb under
influxdb node
Replace:
set service monitoring telegraf
- authentication xxx
- bucket xxx
- port xxx
- url
To:
set service monitoring telegraf influxdb xxx
|
|
After discussion with @zsdc this was decided the better long term fix
* Removes hourly logrotate cron in favour of systemd timer override
|
|
firewall: T4299: Add ability to inverse match country-codes
|
|
|
|
|
|
openvpn: T4485: Accept multiple tls ca-certificate values
|
|
|
|
|
|
|
|
If a parameter is required is determined from the Python string on commit.
This "indicator" is not used consistently and sometimes missing, or added where
it is not required anymore due to Python script improvement/rewrite.
|
|
Firewall: T3907: add log-level options in firewall
|
|
firewall: T970: Add firewall group domain-group
|
|
|
|
|
|
|
|
|
|
Commit f9e38622 ("rip: T4448: add support to set protocol version on an
interface level") also added the versionspecified on a per interface level.
the RIp version carried a default value of 2 which makes RIPv1 and RIPv2 no
longer working which is dthe default for FRR. Remove the default "2" from the
RIP version specifier to make this behavior work again.
|
|
|
|
|
|
|
|
Domain group allows to filter addresses by domain main
Resolved addresses as elements are stored to named "nft set"
that used in the nftables rules
Also added a dynamic "resolver" systemd daemon
vyos-domain-group-resolve.service which starts python script
for the domain-group addresses resolving by timeout 300 sec
set firewall group domain-group DOMAINS address 'example.com'
set firewall group domain-group DOMAINS address 'example.org'
set firewall name FOO rule 10 action 'drop'
set firewall name FOO rule 10 source group domain-group 'DOMAINS'
set interfaces ethernet eth0 firewall local name 'FOO'
nft list table ip filter
table ip filter {
set DOMAINS {
type ipv4_addr
flags interval
elements = { 192.0.2.1, 192.0.2.85,
203.0.113.55, 203.0.113.58 }
}
chain NAME_FOO {
ip saddr @DOMAINS counter packets 0 bytes 0 drop comment "FOO-10"
counter packets 0 bytes 0 return comment "FOO default-action accept"
}
}
|
|
|
|
The sla-id parameter of DHCPv6 prefix delegations is limited to 128. While this
is enough to use all /64 subnets of a /57 prefix, with a /56 prefix that is no
longer sufficient.
Increased sla-id length tp 64535 so one could delegate an entire /48.
|
|
monitoring: T4418: Add output plugin azure-data-explorer
|
|
Add output telegraf Plugin Azure Data Explorer
set service monitoring telegraf azure-data-explorer authentication client-id 'x'
set service monitoring telegraf azure-data-explorer authentication client-secret 'x'
set service monitoring telegraf azure-data-explorer authentication tenant-id 'x'
set service monitoring telegraf azure-data-explorer database 'x'
set service monitoring telegraf azure-data-explorer group-metrics 'single-table'
set service monitoring telegraf azure-data-explorer url 'http://localhost.loc'
|
|
|
|
ppppoe-server: T4373: Add option multiplier for correct shaping
|
|
Multiplier option is required by some vendors for correct shaping
For RADIUS based rate-limits
edit service pppoe-server
set authentication radius rate-limit multiplier '0.001'
|
|
|
|
Firewall: T990: Add snat and dnat connection status on firewall
|
|
|
|
|
|
|
|
|
|
|
|
present for DHCP
VyOS 1.4 still leverages PPPd internals on the CLI.
pppd supports three options for a default route, none, auto, force.
* none: No default route is installed on interface up
* auto: Default route is only installed if there is yet no default route
* force: overwrite any default route
There are several drawbacks in this design for VyOS and the users. If auto is
specified, this only counted for static default routes - but what about dynamic
ones? Same for force, only a static default route got replaced but dynamic ones
did not got taken into account.
The CLI is changed and we now re-use already existing nodes from the DHCP
interface configuration:
* no-default-route:
On link up no default route is installed, same as the previous
default-route none
* default-route-distance:
We can now specify the distance of this route for the routing table on the
system. This defaults to 210 as we have for DHCP interfaces. All this will be
migrated using a CLI migration script.
|
|
|
|
set interfaces vxlan vxlan0 parameters ip df <set|unset|inherit>
set interfaces geneve gnv0 parameters ip df <set|unset|inherit>
|
|
|
|
|
|
|
|
|
|
ocserv: T4231: Added OTP support for Openconnect 2FA
|
|
|
