summaryrefslogtreecommitdiff
path: root/interface-definitions/include
AgeCommit message (Collapse)Author
2023-06-04dns: T5144: Apply migration for dynamic dns path updateIndrajit Raychaudhuri
Create migration and bump package version from 0 -> 1 for dynamic dns
2023-06-03dns: T5144: Modernize dynamic dns operationIndrajit Raychaudhuri
Apply next round of configuration tree updates to 'service dns dynamic' with the following changes: - Migrate `service dns dynamic interface <interface> [use-web]` to `service dns dynamic address <interface>` or `service dns dynamic address web [web-options]` This communicates the intent that dynamic dns IP address is detected in only one way - using the `<interface>` or using an external web request, not both. - When using external web request, (`service dns dynamic address web`), external url is optional (`web-options url`). Ddclient defaults are used when unspecified, - Rename all config `login` to `username` for consistency and also to align better with alternative ddclient backends in consideration. - Apply global 'ipv6-enable' to per service 'ip-version: ipv6'. Selecting usage of IPv4 or IPv6 (or both simultaneously) is now at per service (protocol) level instead of global level. This allows more control on the ability to select IPv4 in some cases and IPv6 in some other cases wherever supported by the underlying ddclient protocol. - While the IP address (and by extension, the detection mechanism) is global, the way it is applied to a particular ddclient protocol depends on whether it supports IPv4 or IPv6 or both. - Related to the above, this also prevents generating incorrect config file (`ddclient.conf`) with multiple global sections leading to an unpredictable behavior of ddclient. - Implement provider (protocol) specific custom tweaks whenever possible (e.g., `zone`, `username`, `server` are not necessary in all cases). - Move service name from a combination of 'protocol' (with protocol config autodetected) and custom (with protocol config specified) to a single 'service' key. This allows for consisent setup of multiple config for the same ddclient protocol (with different options and credentials). This also avoid ambiguity with usual networking term 'protocol' and ddclient specific term 'protocol' (and can change with a move to a different backend). - Apply upfront XML constraints and validations consistently wherever applicable. - RFC2136 specific change: Rename rfc2136 config `record` to `host-name` for consistency. - Cloudflare specific change: While ddclient still supports authenticating with email and global auth key, skipping `username` in config will indicate the intent to use API token authentication (with special 'token' literal as `username`).
2023-06-03netns: xml: T3829: fix format stringChristian Breunig
2023-05-19T5230: Added missing enforce-first-as option to bgp protocol common config ↵Wered
and frr bgp jinja template.
2023-05-19T5222: Refactoring load-balancing reverse-proxyViacheslav Hletenko
Improve and refactoring "load-balancing reverse-proxy" - replace 'reverse-proxy server <tag>' => 'reverse-proxy service <tag>' - replace 'reverse-proxy global-parameters tls <xxx>' => 'reverse-proxy global-parameters tls-version-min xxx' => 'reverse-proxy global-parameters ssl-bind-ciphers xxx' - replace 'reverse-proxy service https rule <tag> set server 'xxx' => 'reverse-proxy service https rule <tag> set backend 'xxx' 'service https rule <tag> domain-name xxx' set as multinode
2023-05-17Merge pull request #2004 from sever-sever/T5222Christian Breunig
T5222: Add load-balancing for web traffic
2023-05-17T5222: Add load-balancing for web trafficViacheslav Hletenko
2023-05-16T5226: Fix typo in XML include headersIndrajit Raychaudhuri
2023-05-16T5226: Make host-name constraints to consistent everywhereIndrajit Raychaudhuri
Make host-name constraints consistent across all definitions
2023-05-16T5226: Combine ipv4-address and ipv6-address validatorsIndrajit Raychaudhuri
Use a single ip-address validator to combine and replace ipv4-address and ipv6-address validators.
2023-05-12ocserv: T3896: improve XML definition and add warning about 3rd party configsChristian Breunig
When enabling identity-based-config, users can add arbitrary config keys that are processed by ocserv. The user "must know" what he is been doing, as invalid config option will make the ocserv daemon go ... whoop! Thus add a warning and inform the user about this setting.
2023-05-12Merge pull request #1783 from PeppyH/T3896-ocserv-config-per-xChristian Breunig
ocserv: T3896: add CLI options to configure ocserv config-per-user/group
2023-05-10T5213: Add accounting-interim-interval option for L2TP-serverViacheslav Hletenko
Add RADIUS accounting-interim-interval option for L2TP-server Specifies interval in seconds to send accounting information (may be overridden by radius Acct-Interim-Interval attribute) set vpn l2tp remote-access authentication radius accounting-interim-interval '120'
2023-05-09Merge pull request #1985 from c-po/t2778-syslogChristian Breunig
syslog: T2778: T2769: refactoring and VRF support
2023-05-09T5213: Add accounting-interim-interval option for PPPoE IPoE SSTPViacheslav Hletenko
Add RADIUS accounting-interim-interval option for PPPoE/IPoE/SSTP servers. Specifies interval in seconds to send accounting information (may be overridden by radius Acct-Interim-Interval attribute) set service pppoe-server authentication radius accounting-interim-interval '60'
2023-05-08syslog: T2778: migrate to get_config_dict()Christian Breunig
2023-05-08T4780: bump firewall version 9 -> 10Christian Breunig
2023-05-05syslog: T2769: xml: provide common facility building blockChristian Breunig
2023-05-05syslog: T2769: xml: provide common constraint for system usernamesChristian Breunig
2023-04-29static: T5161: add BFD monitoring for static IPv6 routesfett0
2023-04-29static: T5161: add BFD monitoring for static routesfett0
2023-04-27Revert "bgp: T3734: only support "l2vpn-evpn advertise-all-vni" in default VRF"Christian Breunig
This reverts commit bfe57cf80f4c71236f0885408d704a69575f0b30.
2023-04-20ocserv: T3896: refactor: change ocserv config-per-x node nameJamie Austin
Changes the node name from config-per-x to identity-based-config, as a result the j2 templates and vpn_openeconnect.py has been refactored to update the node name when accessing it's child nodes.
2023-04-17bgp: T3734: only support "l2vpn-evpn advertise-all-vni" in default VRFChristian Breunig
2023-04-13T5150: migrate CLI configs to new Kernel/Zebra route-map supportChristian Breunig
2023-04-13T5150: do not apply zebra route-map from routing-daemon config levelChristian Breunig
2023-04-13T5150: initial implementation of new Kernel/Zebra route-map supportChristian Breunig
It is possible to install a route-map which filters the routes between routing daemons and the OS kernel (zebra) As of now this can be done by e.g. * set protocols ospf route-map foo * set protocols ospfv3 route-map foo * set protocols bgp route-map foo Which in turn will install the following lines into FRR * ip protocol ospf route-map foo * ipv6 protocol ospf6 route-map foo * ip protocol bgp route-map foo The current state of the VyOS CLI is incomplete as there is no way to: * Install a filter for BGP IPv6 routes * Install a filter for static routes * Install a filter for connected routes Thus the CLI should be redesigned to close match what FRR does for both the default and any other VRF * set system ip protocol ospf route-map foo * set system ipv6 protocol ospfv3 route-map foo * set system ip protocol bgp route-map foo * set system ipv6 protocol bgp route-map foo The configuration can be migrated accordingly. This commit does not come with the migrator, it will be comitted later.
2023-04-12xml: T5081: generate common holddown XML building block for IS-IS and OSPFChristian Breunig
2023-04-04T5081: ISIS and OSPF syncronization with IGP-LDP syncCheeze_It
2023-04-01xml: include building block file name should end with .i and not .inChristian Breunig
2023-04-01xml: T5128: streamline help string for interface CLI node building blocksChristian Breunig
2023-04-01xml: allow-client: T5126: re-use new building block also for NTP serviceChristian Breunig
2023-03-31http-api: T5126: allow restricting client IP addressJohn Estabrook
2023-03-31T5128: Policy Route: allow wildcard on interfaceNicolas Fort
2023-03-29T5115: bump version dns-forwarding 3 -> 4Christian Breunig
2023-03-28dns: T5115: Support custom port for name servers for forwarding zones.Indrajit Raychaudhuri
This would allow using custom ports in name server operating on non- default port for forwarding zones. This is a follow-up to T5113 for sake of completeness and having consistent treatment of all name servers configured in PowerDNS recursor. Additionally, migrate `service dns forwarding domain example.com server` to `service dns forwarding domain foo3.com name-server` for consistency and reusability.
2023-03-27bgp: T5114: support configuring TCP keepalive messagesChristian Breunig
2023-03-27bgp: T5114: add "neighbor path-attribute discard"Christian Breunig
2023-03-27bgp: T5114: add peer-group "port" CLI commandChristian Breunig
2023-03-27dns: T5113: Support custom port for name-server forwardersIndrajit Raychaudhuri
Support custom port for name-server forwarders that would allow using custom ports in name server forwarders to enable forwarding to alternative name servers (unbound, stubby, dnscrypt-proxy etc.) operating on non-default port. This would also allow using DNS Over TLS in PowerDNS Recursor 4.6 onwards (pdns doesn't support certificate check for validity yet) by enabling 'dot-to-port-853'. This is set by default if compiled in with DoT support. See: https://doc.powerdns.com/recursor/settings.html#dot-to-port-853 This also partially implements T921, T2195 (DoT without certificate check). Implementation details: - In 'dns/forwarding' configuration, 'name-server' now allows optional 'port' (defaults to 53). - Instead of modifying 'name-server-ipv4-ipv6.xml.i' to add optional 'port', a new file 'name-server-ipv4-ipv6-port.xml.i' has been used to avoid impacting other places where it is reused because not all of them honor ports (mostly VPN related). - The `host:port` entries to be used by PowerDNS recursor config are normalized eagerly at the point of loading VyOS `Config` instead of doing them lazily while rendering the Jinja2 template to keep the implementation less intrusive. The alternative would entail making quite a bit of change in how 'vyos-hostsd' processes 'static' 'name_servers' entries or persists their runtime states.
2023-03-24xml: T5109: use common include file for alpha-numeric, hyphen and underscore ↵Christian Breunig
regex
2023-03-23Merge pull request #1901 from sever-sever/T5099Christian Breunig
T5099: IPoE-server add option next-pool for named ip pools
2023-03-21T5099: IPoE-server add option next-pool for named ip poolsViacheslav Hletenko
In cases with multiple named IP pools, it is required the option 'next' to be sure that if IP addresses ended in one pool, then they would begin to be allocated from the next named pool. For accel-ppp it requires specific order as pool must be defined before we can use it with the 'next-option' set service ipoe-server client-ip-pool name first-pool subnet '192.0.2.0/25' set service ipoe-server client-ip-pool name first-pool next-pool 'second-pool' set service ipoe-server client-ip-pool name second-pool subnet '203.0.113.0/25' [ip-pool] 203.0.113.0/25,name=second-pool 192.0.2.0/25,name=first-pool,next=second-pool
2023-03-21Merge pull request #1889 from nicolas-fort/T5050-logViacheslav Hletenko
T5050: Firewall: Add log options
2023-03-21T5050: Firewall: Add log optionsNicolas Fort
2023-03-14Merge pull request #1890 from nicolas-fort/T5055Viacheslav Hletenko
T5055: NAT: extend packet-type to NAT
2023-03-14T5055: NAT: extend packet-type match option which was previously introduced ↵Nicolas Fort
in firewall, to NAT
2023-03-10Merge pull request #1871 from nicolas-fort/T5055Christian Breunig
T5055: Firewall: add packet-type matcher in firewall and route policy
2023-03-10container: T4959: add registry authentication optionChristian Breunig
Container registry CLI node changed from leafNode to tagNode with the same defaults. In addition we can now configure an authentication option per registry.
2023-03-09xml: T4952: improve interface completion helper CLI experienceChristian Breunig