summaryrefslogtreecommitdiff
path: root/interface-definitions/include
AgeCommit message (Collapse)Author
2024-01-21ddclient: T5966: Migration script for dynamic dns config subpath changeIndrajit Raychaudhuri
2024-01-21Merge pull request #2852 from sever-sever/T5958Viacheslav Hletenko
T5958: QoS add basic implementation of policy shaper-hfsc
2024-01-18T5779: conntrack: bump version numberChristian Breunig
2024-01-18T5958: QoS add basic implementation of policy shaper-hfscViacheslav Hletenko
QoS policy shaper-hfsc was not implemented after rewriting the traffic-policy to qos policy. We had CLI but it does not use the correct class. Add a basic implementation of policy shaper-hfsc. Write the class `TrafficShaperHFS`
2024-01-17Merge pull request #2832 from aapostoliuk/T5865-circinusChristian Breunig
T5865: Moved ipv6 pools to named ipv6 pools in accel-ppp
2024-01-16T4658: Renamed DPD action value from 'hold' to 'trap'aapostoliuk
Renamed DPD action value from 'hold' to 'trap'
2024-01-16T5865: Moved ipv6 pools to named ipv6 pools in accel-pppaapostoliuk
Moved ipv6 pools to named ipv6 pools in accel-ppp services
2024-01-14bgp: T591: add VPN nexthop support per address-familyChristian Breunig
set protocols bgp address-family ipv4-unicast nexthop vpn export <ipv4-address|ipv6-address> set protocols bgp address-family ipv6-unicast nexthop vpn export <ipv4-address|ipv6-address>
2024-01-14bgp: T591: add SRv6 per address-family SID supportChristian Breunig
set protocols bgp address-family ipv4-unicast sid vpn export <auto|1-1048575> set protocols bgp address-family ipv6-unicast sid vpn export <auto|1-1048575>
2024-01-13dhcpv6: T3316: Move options to separate node and extend scopessarthurdev
* Also migrate `address-range` to `range` tag node for consistency with dhcpv4 server syntax
2024-01-11dhcp: dhcpv6: T3316: Add `subnet-id` so leases remain mapped to entries in ↵Simon
the lease file (#2796)
2024-01-10Merge pull request #2777 from aapostoliuk/T5688-multirangeChristian Breunig
T5688: Changed 'range' to multi in 'client-ip-pool' for accell-ppp
2024-01-10Merge pull request #2787 from c-po/bgp-5913Viacheslav Hletenko
bgp: T5913: allow peer-group support for ipv4|6-labeled-unicast SAFI
2024-01-10bgp: T5913: allow peer-group support for ipv4|6-labeled-unicast SAFIChristian Breunig
2024-01-10Merge pull request #2785 from sarthurdev/kea-optionsChristian Breunig
dhcp: T3316: T5787: T5912: Extend scope of DHCP options, bugfixes
2024-01-10dhcp: T3316: Fix `listen-address` handling and add `listen-interface` as ↵sarthurdev
supported by Kea
2024-01-10dhcp: T3316: Move options to separate node and extend scopessarthurdev
2024-01-09T5688: Changed 'range' to multi in 'client-ip-pool' for accell-pppaapostoliuk
Changed node 'range' to multi in 'client-ip-pool' for accell-ppp services. Added completionHelp to default-pool and next-pool. Fixed verification in vpn l2tp config script.
2024-01-09https: T5902: remove virtual-host configurationChristian Breunig
We have not seen the adoption of the https virtual-host CLI option. What it did? * Create multiple webservers each listening on a different IP/port (but in the same VRF) * All webservers shared one common document root * All webservers shared the same SSL certificates * All webservers could have had individual allow-client configurations * API could be enabled for a particular virtual-host but was always enabled on the default host This configuration tried to provide a full webserver via the CLI but VyOS is a router and the Webserver is there for an API or to serve files for a local-ui. Changes Remove support for virtual-hosts as it's an incomplete and thus mostly useless "thing". Migrate all allow-client statements to one top-level allow statement.
2024-01-06https: T5886: migrate https certbot to new "pki certificate" CLI treeChristian Breunig
2024-01-06pki: T5886: add support for ACME protocol (LetsEncrypt)Christian Breunig
The "idea" of this PR is to add new CLI nodes under the pki subsystem to activate ACME for any given certificate. vyos@vyos# set pki certificate NAME acme Possible completions: + domain-name Domain Name email Email address to associate with certificate listen-address Local IPv4 addresses to listen on rsa-key-size Size of the RSA key (default: 2048) url Remote URL (default: https://acme-v02.api.letsencrypt.org/directory) Users choose if the CLI based custom certificates are used set pki certificate EXAMPLE acme certificate <base64> or if it should be generated via ACME. The ACME server URL defaults to LetsEncrypt but can be changed to their staging API for testing to not get blacklisted. set pki certificate EXAMPLE acme url https://acme-staging-v02.api.letsencrypt.org/directory Certificate retrieval has a certbot --dry-run stage in verify() to see if it can be generated. After successful generation, the certificate is stored in under /config/auth/letsencrypt. Once a certificate is referenced in the CLI (e.g. set interfaces ethernet eth0 eapol certificate EXAMPLE) we call vyos.config.get_config_dict() which will (if with_pki=True is set) blend in the base64 encoded certificate into the JSON data structure normally used when using a certificate set by the CLI. Using this "design" does not need any change to any other code referencing the PKI system, as the base64 encoded certificate is already there. certbot renewal will call the PKI python script to trigger dependency updates.
2024-01-03xml: T5738: add constraint building block with alphanumeric, hypen, ↵Christian Breunig
underscore and dot
2024-01-01configverify: T5880: raise exception if interfaces sourced form dynamic ↵Christian Breunig
interfaces Interfaces matching the following regex (ppp|pppoe|sstpc|l2tp|ipoe)[0-9]+ can not be used as source-interface for e.g. a tunnel. The main reason is that these are dynamic interfaces which come and go from a kernel point of view, thus it's not possible to bind an interface to them.
2023-12-29system: T5877: Shorten system domain-search config pathIndrajit Raychaudhuri
Shorten and simplify `system domain-search` config path from: ``` set system domain-search domain <domain1> ``` to: ``` set system domain-search <domain1> ``` This will shorten the path and also make consistent with `domain-search` config in other places (like `dhcp-server`).
2023-12-28Merge pull request #2658 from aapostoliuk/T5801-circinusChristian Breunig
T5801: Rewritten L2TP to get_config_dict
2023-12-28Merge pull request #2650 from indrajitr/kea-reservation-fixChristian Breunig
dhcp: T3316: Support hostname, DUID and MAC address in reservation
2023-12-26firewall: T5834: Improve log message and simplify log-option includeIndrajit Raychaudhuri
`include/firewall/rule-log-options.xml.i` is now more aptly renamed to `include/firewall/log-options.xml.i`.
2023-12-26firewall: T5834: Remove vestigial include fileIndrajit Raychaudhuri
This file is a left over from previous refactoring and no longer referenced anywhere in the interface definitions.
2023-12-26firewall: T5834: Migration for 'enable-default-log' to 'default-log'Indrajit Raychaudhuri
2023-12-26firewall: T5834: Rename 'enable-default-log' to 'default-log'Indrajit Raychaudhuri
Rename chain level defaults log option from `enable-default-log` to `default-log` for consistency.
2023-12-25snmp: T5855: migrate "set service lldp snmp enable" to "set service lldp snmp"Christian Breunig
2023-12-21dhcp: T3316: Apply migration for valid hostname, and identifier (DUID)Indrajit Raychaudhuri
2023-12-21Merge pull request #2665 from c-po/ndp-proxyChristian Breunig
T2898: add ndp-proxy service
2023-12-21dhcp: T5846: Ensure DUID regex range is boundIndrajit Raychaudhuri
The DUID regex was missing a lower bound, which could cause it not to match when it should. We have to specify the lower bound explicitly as 0 to keep the regex behavior similar to that in Python (in Python, omitting the lower bound is equivalent to specifying 0).
2023-12-21dhcp: T5846: Fix include pathIndrajit Raychaudhuri
2023-12-21dhcp: T5846: Refactor and simplify DUID definitionIndrajit Raychaudhuri
Refactor DUID XML definition in conf-mode to be reusable. Additionally, remove explicit call to a separate validator `ipv6-duid` and inline the regex into the XML definition.
2023-12-20T2898: add ndp-proxy serviceChristian Breunig
VyOS CLI command set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static' Will generate the following NDP proxy configuration $ cat /run/ndppd/ndppd.conf # autogenerated by service_ndp-proxy.py # This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route route-ttl 30000 # This sets up a listener, that will listen for any Neighbor Solicitation # messages, and respond to them according to a set of rules proxy eth0 { # Turn on or off the router flag for Neighbor Advertisements router no # Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds) timeout 500 # Control how long a valid or invalid entry remains in the cache (milliseconds) ttl 30000 # This is a rule that the target address is to match against. If no netmask # is provided, /128 is assumed. You may have several rule sections, and the # addresses may or may not overlap. rule 2001:db8::/64 { static } }
2023-12-20T5801: Rewritten L2TP to get_config_dictaapostoliuk
Rewritten L2TP to get_config_dict Rewritten L2TP xml to accel-ppp patterns Migrated 'idle' to 'ppp-options.lcp-echo-timeout' Migrated 'authentication.mppe' to 'ppp-options.mppe' Migrated 'authentication.radius.dae-server' to 'authentication.radius.dynamic-author' Migrated 'authentication.require' to 'authentication.protocol' Added 'authentication.radius.acct-interim-jitter' Added 'authentication.radius.preallocate-vif' Added 'authentication.radius.server.<IP>.acct-port' Added 'ppp-options.ipv4' Added smoke-tests Fixed 'preallocate-vif' in SSTP
2023-12-15firewall: T4502: add ofload to firewall table actionsGurliGebis
2023-12-14Merge pull request #2627 from sever-sever/T4163Christian Breunig
T4163: Add BGP Monitoring Protocol BMP feature
2023-12-14Merge pull request #2590 from sever-sever/T5798Christian Breunig
T5798: load-balancing revese-proxy add multiple SSL certificates
2023-12-14T4163: Add BGP Monitoring Protocol BMP featureViacheslav Hletenko
Add BMP feature. BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring data from BGP routers to network management entities https://docs.frrouting.org/en/latest/bmp.html Example: set system frr bmp commit run restart bgp set protocols bgp system-as '65001' set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast set protocols bgp neighbor 192.0.2.11 remote-as '65001' set protocols bgp bmp mirror-buffer-limit '256000000' set protocols bgp bmp target foo address '127.0.0.1' set protocols bgp bmp target foo port '5000' set protocols bgp bmp target foo min-retry '1000' set protocols bgp bmp target foo max-retry '2000' set protocols bgp bmp target foo mirror set protocols bgp bmp target foo monitor ipv4-unicast post-policy set protocols bgp bmp target foo monitor ipv4-unicast pre-policy set protocols bgp bmp target foo monitor ipv6-unicast post-policy set protocols bgp bmp target foo monitor ipv6-unicast pre-policy
2023-12-11bgp: T591: add SRv6 support from FRRChristian Breunig
set protocols bgp sid vpn per-vrf export '99' set protocols bgp srv6 locator 'foo' set protocols bgp system-as '100' Will generate in FRR config router bgp 100 no bgp ebgp-requires-policy no bgp default ipv4-unicast no bgp network import-check ! segment-routing srv6 locator foo exit sid vpn per-vrf export 99 exit
2023-12-09Merge pull request #1960 from sarthurdev/keaChristian Breunig
dhcp: T3316: Migrate dhcp/dhcpv6 server to Kea
2023-12-08git: T5803: Adjust git configuration for baseline defaultsIndrajit Raychaudhuri
Apply baseline defaults for `.gitattributes` and `.vscode/settings.json` for improved developer experience. The `.gitattrbutes` settings are based on: Git documentation (https://git-scm.com/docs/gitattributes#_effects) GitHub documentation (https://docs.github.com/en/get-started/getting-started-with-git/configuring-git-to-handle-line-endings) Community templates (https://github.com/gitattributes/gitattributes) Since editor-agnostic line-ending specific settings are applied to `.gitattributes`, they can be removed from `.vscode/settings.json`. The global VSCode defaults have also been removed to avoid duplication.
2023-12-08T5798: load-balancing revese-proxy add multiple SSL certificatesViacheslav Hletenko
Add ability to configure multiple SSL certificates for frontend/service set load-balancing reverse-proxy service web mode http set load-balancing reverse-proxy service web port 443 set load-balancing reverse-proxy service web ssl certificate cert1 set load-balancing reverse-proxy service web ssl certificate cert2
2023-12-08dhcp: T3316: Add captive portal v4/v6 optionssarthurdev
2023-12-08dhcp: T3316: Migrate dhcp/dhcpv6 server to Keasarthurdev
2023-12-07Merge pull request #2539 from nicolas-fort/T5775Daniil Baturin
T5775: firewall: re-add state-policy to firewall. These commands are …
2023-12-06T160: Rebase and fixes for NAT64Viacheslav Hletenko
- Update the base (rebase) - Move include/nat64-protocol.xml.i => include/nat64/protocol.xml.i - Delete unwanted `write_json`, use `write_file` instead - Remove unnecessary deleting of default values for tagNodes T2665 - Add smoketest Example: ``` set interfaces ethernet eth0 address '192.168.122.14/24' set interfaces ethernet eth0 address '192.168.122.10/24' set interfaces ethernet eth2 address '2001:db8::1/64' set nat64 source rule 100 source prefix '64:ff9b::/96' set nat64 source rule 100 translation pool 10 address '192.168.122.10' set nat64 source rule 100 translation pool 10 port '1-65535' ```