| Age | Commit message (Collapse) | Author |
|---|
|
* set protocols bgp parameters labeled-unicast <explicit-null | ipv4-explicit-null | ipv6-explicit-null>
* set protocols bgp parameters allow-martian-nexthop
* set protocols bgp parameters no-hard-administrative-reset"
|
|
rpki: T6011: known-hosts-file is no longer supported by FRR
|
|
|
|
The replay_window for child SA will always be 32 (hence enabled). Add a CLI node
to explicitly change this.
* set vpn ipsec site-to-site peer <name> replay-window <0-2040>
|
|
dhcpv6: T3771: Installation of routes for delegated prefixes, add excluded-prefix to PD
|
|
T5971: Rewritten ppp options in accel-ppp services
|
|
T4839: firewall: Add dynamic address group in firewall configuration
|
|
ddclient: T5966: Adjust dynamic dns config address subpath
|
|
bgp: T5930: Denied using rt vpn 'export/import' with 'both' together
|
|
Denied using command 'route-target vpn export/import'
with 'both' together in bgp configuration.
|
|
T5977: firewall: remove ipsec options in output chain rule definition…
|
|
|
|
Rewritten 'ppp-options' to the same view in all accel-ppp services.
Adding IPv6 support to PPTP.
|
|
appropiate commands to populate such groups using source and destination address of the packet.
|
|
|
|
since it's not supported.
|
|
* set protocols bfd peer <x.x.x.x> minimum-ttl <1-254>
* set protocols bfd profile <name> minimum-ttl <1-254>
|
|
|
|
T5958: QoS add basic implementation of policy shaper-hfsc
|
|
|
|
QoS policy shaper-hfsc was not implemented after rewriting the
traffic-policy to qos policy. We had CLI but it does not use the
correct class. Add a basic implementation of policy shaper-hfsc.
Write the class `TrafficShaperHFS`
|
|
T5865: Moved ipv6 pools to named ipv6 pools in accel-ppp
|
|
Renamed DPD action value from 'hold' to 'trap'
|
|
Moved ipv6 pools to named ipv6 pools in accel-ppp services
|
|
set protocols bgp address-family ipv4-unicast nexthop vpn export <ipv4-address|ipv6-address>
set protocols bgp address-family ipv6-unicast nexthop vpn export <ipv4-address|ipv6-address>
|
|
set protocols bgp address-family ipv4-unicast sid vpn export <auto|1-1048575>
set protocols bgp address-family ipv6-unicast sid vpn export <auto|1-1048575>
|
|
* Also migrate `address-range` to `range` tag node for consistency with dhcpv4 server syntax
|
|
the lease file (#2796)
|
|
T5688: Changed 'range' to multi in 'client-ip-pool' for accell-ppp
|
|
bgp: T5913: allow peer-group support for ipv4|6-labeled-unicast SAFI
|
|
|
|
dhcp: T3316: T5787: T5912: Extend scope of DHCP options, bugfixes
|
|
supported by Kea
|
|
|
|
Changed node 'range' to multi in 'client-ip-pool' for accell-ppp
services.
Added completionHelp to default-pool and next-pool.
Fixed verification in vpn l2tp config script.
|
|
We have not seen the adoption of the https virtual-host CLI option.
What it did?
* Create multiple webservers each listening on a different IP/port
(but in the same VRF)
* All webservers shared one common document root
* All webservers shared the same SSL certificates
* All webservers could have had individual allow-client configurations
* API could be enabled for a particular virtual-host but was always enabled on
the default host
This configuration tried to provide a full webserver via the CLI but VyOS is a
router and the Webserver is there for an API or to serve files for a local-ui.
Changes
Remove support for virtual-hosts as it's an incomplete and thus mostly useless
"thing". Migrate all allow-client statements to one top-level allow statement.
|
|
|
|
The "idea" of this PR is to add new CLI nodes under the pki subsystem to
activate ACME for any given certificate.
vyos@vyos# set pki certificate NAME acme
Possible completions:
+ domain-name Domain Name
email Email address to associate with certificate
listen-address Local IPv4 addresses to listen on
rsa-key-size Size of the RSA key (default: 2048)
url Remote URL (default:
https://acme-v02.api.letsencrypt.org/directory)
Users choose if the CLI based custom certificates are used
set pki certificate EXAMPLE acme certificate <base64>
or if it should be generated via ACME.
The ACME server URL defaults to LetsEncrypt but can be changed to their staging
API for testing to not get blacklisted.
set pki certificate EXAMPLE acme url https://acme-staging-v02.api.letsencrypt.org/directory
Certificate retrieval has a certbot --dry-run stage in verify() to see if it
can be generated.
After successful generation, the certificate is stored in under
/config/auth/letsencrypt. Once a certificate is referenced in the CLI (e.g. set
interfaces ethernet eth0 eapol certificate EXAMPLE) we call
vyos.config.get_config_dict() which will (if with_pki=True is set) blend in the
base64 encoded certificate into the JSON data structure normally used when
using a certificate set by the CLI.
Using this "design" does not need any change to any other code referencing the
PKI system, as the base64 encoded certificate is already there.
certbot renewal will call the PKI python script to trigger dependency updates.
|
|
underscore and dot
|
|
interfaces
Interfaces matching the following regex (ppp|pppoe|sstpc|l2tp|ipoe)[0-9]+ can
not be used as source-interface for e.g. a tunnel.
The main reason is that these are dynamic interfaces which come and go from a
kernel point of view, thus it's not possible to bind an interface to them.
|
|
Shorten and simplify `system domain-search` config path from:
```
set system domain-search domain <domain1>
```
to:
```
set system domain-search <domain1>
```
This will shorten the path and also make consistent with `domain-search`
config in other places (like `dhcp-server`).
|
|
T5801: Rewritten L2TP to get_config_dict
|
|
dhcp: T3316: Support hostname, DUID and MAC address in reservation
|
|
`include/firewall/rule-log-options.xml.i` is now more aptly renamed to
`include/firewall/log-options.xml.i`.
|
|
This file is a left over from previous refactoring and no longer
referenced anywhere in the interface definitions.
|
|
|
|
Rename chain level defaults log option from `enable-default-log` to
`default-log` for consistency.
|
|
|
|
|
|
T2898: add ndp-proxy service
|
