summaryrefslogtreecommitdiff
path: root/interface-definitions/include
AgeCommit message (Collapse)Author
2021-03-13vrf: ospf: T2271: re-arrange xml include building blocksChristian Poessinger
In order to fully re-use the XML based OSPF CLI definition for per-VRF routing, the file structure needs to be reorganized and the common OSPF definition is moved to its dedicated ospf-common-config.xml.i file, which can then be fully re-included at the VRF level. As the amount of include files now has reached a certain amount, this also introduces "per topic" subdirectories on the filesystem to keep a clean structure.
2021-03-10bgp: evpn: T1513: add support for per VNI route-distinguished and route-targetChristian Poessinger
set protocols bgp 65010 address-family l2vpn-evpn vni 100 route-target both 516:10516 set protocols bgp 65010 address-family l2vpn-evpn vni 100 rd 192.168.0.1:514 Todo: add verify() step to check if at least one evpn enabled BGP neighbor exits, else FRR will error out with: This command is only supported under EVPN VRF
2021-03-08bgp: T3391: migrate old IPv4 only maximum-paths config to new syntaxChristian Poessinger
2021-03-07bgp: T3391: add per AFI maximum-paths supportChristian Poessinger
* set protocols bgp ASN address-family ipv4-unicast maximum-paths * set protocols bgp ASN address-family ipv4-unicast maximum-paths-ibgp * set protocols bgp ASN address-family ipv6-unicast maximum-paths * set protocols bgp ASN address-family ipv6-unicast maximum-paths-ibgp
2021-03-07vxlan: T3319: use default ttl of 16Christian Poessinger
VyOS 1.2 had a default ttl of 16 hardcoded to the node.def file [1], so until this is handled via a migration script we have to obey that particular setting. [1]: https://github.com/vyos/vyatta-cfg-system/blob/crux/templates/interfaces/vxlan/node.def#L23
2021-03-06bgp: T2387: add interface completion helper for update-sourceChristian Poessinger
2021-03-04Merge pull request #729 from bstepler/T3300Christian Poessinger
dhcp: T3300: add DHCP default route distance
2021-02-28vxlan: T1513: add dont-fragment CLI optionChristian Poessinger
2021-02-28vxlan: T3369: add underlay IPv6 supportChristian Poessinger
2021-02-28tunnel: T3366: rename remote-ip to remoteChristian Poessinger
Streamline the CLI configuration where we try to use remote on other interfaces like vxlan, geneve.
2021-02-28tunnel: T3366: rename local-ip to source-addressChristian Poessinger
Streamline the CLI configuration where we try to use source-address when creating connections which are especially sourced from a discrete address.
2021-02-28vxlan: T1513: add additional EVPN related CLI optionsChristian Poessinger
A VXLAN tunnel may now get a TTL, TOS, Flowlabel option specified. It is also possible to disable learning of unknown addresses into the forwarding database.
2021-02-24xml: add missing constaint to source-interface includeChristian Poessinger
2021-02-24route: static: T2450: add missing "dhcp-interface" route optionChristian Poessinger
As thought in the beginning the dhcp-interface route option can not be superseeded by the interface option. When a route is installed for a DHCP interface, that interface is usually a broadcast interface which can not be used for plain interface-based routes. The old Vyatta logic was migrated to Python where the current received next-hop address from the DHCP interface is installed as next-hop address.
2021-02-22xml: tunnel: erspan: make individual parameter nodes reusableChristian Poessinger
VXLAN will get tos, ttl and flowlabel options thus make individual parameter settings reusable by splitting tunnel-parameters-ip.xml.i into individual files.
2021-02-19bgp: T3331: Fix set unsuppress-map for neighborsever-sever
2021-02-15Merge pull request #732 from c-po/t3310-bfdJohn Estabrook
bfd: T3310: migrate to get_config_dict() and FRR reload
2021-02-15bgp: T1513: add per VRF vni supportChristian Poessinger
2021-02-15bfd: T3310: implement peer profile supportChristian Poessinger
2021-02-15bgp: T3311: remove remote-as from address-familyChristian Poessinger
When moving from Quagga to FRR the BGP address-family was extended by an invalid peer-group statement. FRR always moved a configured peer-group from the AFI level down to the neighbor level. With the migration to FRR reload we must take care about this by ourselves.
2021-02-15dhcp: T3300: add DHCP default route distanceBrandon Stepler
2021-02-14bgp: T2315: add CLI options for addpath-tx-(all-paths|bestpath-per-AS)Christian Poessinger
* protocols bgp 65000 neighbor 192.0.2.1 address-family ipv4-unicast addpath-tx-all * protocols bgp 65000 neighbor 192.0.2.1 address-family ipv4-unicast addpath-tx-per-as * protocols bgp 65000 neighbor 2001:db8::1 address-family ipv6-unicast addpath-tx-all * protocols bgp 65000 neighbor 2001:db8::1 address-family ipv6-unicast addpath-tx-per-as
2021-02-14bgp: T1513: add per VNI advertise-default-gw, advertise-svi-ip optionsChristian Poessinger
2021-02-14bgp: xml: add valueHelp for peer-group definitionChristian Poessinger
2021-02-11ospfv3: T3267: move interface specific options to "protocols ospfv3"Christian Poessinger
2021-02-11ripng: T3281: move interface specific options to "protocols ripng"Christian Poessinger
2021-02-09bgp: T1513: initial implementation of L2VPN EVPN supportChristian Poessinger
2021-02-09xml: cleanup wrong include file extensionsChristian Poessinger
2021-02-07rip: T2547: migrate interface specific configuration under protocols ripChristian Poessinger
2021-02-07ospf: T3267: add proper CLI constraintsChristian Poessinger
2021-02-07rip: T2547: xml cleanup so parts can be reused by RIPngChristian Poessinger
2021-02-06xml: rip: ospf: add passive-interface building blockChristian Poessinger
2021-02-06rip: T2833: xml: split out (access|prefix)-list to re includableChristian Poessinger
2021-02-06xml: migrate DOS -> UNIX line endings for static routing includesChristian Poessinger
2021-02-05Merge branch 't2450-vrf' of github.com:c-po/vyos-1x into currentChristian Poessinger
* 't2450-vrf' of github.com:c-po/vyos-1x: xml: add new common "interface-name" validator xml: include: accel: add missing file include comments smoketest: static: improve static route testing route: static: T2450: provide full protocol support in XML and Python with new CLI vrf: T2450: provide full protocol support in XML and Python with new CLI migrator: ospf: T3267: cleanup empty interface "ip" nodes
2021-02-05xml: add new common "interface-name" validatorChristian Poessinger
2021-02-05xml: include: accel: add missing file include commentsChristian Poessinger
2021-02-05route: static: T2450: provide full protocol support in XML and Python with ↵Christian Poessinger
new CLI
2021-02-05vrf: T2450: provide full protocol support in XML and Python with new CLIChristian Poessinger
2021-02-05tunnel: T3030: Use the default TTL value of 0 to correspond to the PMTU optionjack9603301
Before 94f886ab ("tunnel: T3173: path MTU discov..."), TTL used the default value of 255, so c7d08654 ("tunnel: T3030: Modify the comm...") used the default value of 255. Later, due to the introduction of the PMTU option, the default value was changed to 0. Continuing to use the default value of 255 will cause the smoke test to fail, Therefore, the new definition of TTL is migrated
2021-02-05tunnel: erspan: T3030: Fixed tunnel option missingjack9603301
In 8413278c, we left out a parameter in the tunnel that caused the tunnel smoke test to fail. Now, let's add it
2021-02-04Merge pull request #620 from jack9603301/T3030Christian Poessinger
tunnel: T3030: Add erspan protocol support
2021-02-02ospf: T3263: hello-multiplier is only available for interfaces, not virtual-linkChristian Poessinger
2021-02-02ospf: T3263: support hello sub-second timerChristian Poessinger
Added "set protocols ospf interface eth1 hello-multiplier <n>" CLI command. This is mutually exclusive to "set protocols ospf interface eth1 dead-interval <n>".
2021-02-02conf-mode: T3280: Add XML for protocols staticsever-sever
2021-02-02tunnel: T3030: Modify the command line to streamline configuration (support ↵jack9603301
package type automatic detection)
2021-01-30bgp: T3037: remove invalid CLI nodes for ipv6 specific dynamic capabilityChristian Poessinger
2021-01-29vif-s: T3268: add VRF supportBrandon Stepler
2021-01-29ospf: T3267: move "interface ip ospf" configuration to "protocols ospf ↵Christian Poessinger
interface" For easier maintenance and operability move the interface specific protocol setting of OSPF to the OSPF protocol section. This is now also in-line with IS-IS. This means to migrate: ethernet eth0 { vif 202 { ip { ospf { authentication { md5 { key-id 10 { md5-key vyosvyos } } } dead-interval 40 hello-interval 10 priority 1 retransmit-interval 5 transmit-delay 1 } } } } to protocols { ospf { interface eth0.201 { authentication { md5 { key-id 10 { md5-key vyosvyos } } } dead-interval 40 hello-interval 10 priority 1 retransmit-interval 5 transmit-delay 1 } }
2021-01-25Merge pull request #693 from bstepler/T3240Christian Poessinger
dhcpv6: T3240: support per-interface client DUIDs