summaryrefslogtreecommitdiff
path: root/interface-definitions/include
AgeCommit message (Collapse)Author
2021-09-18dhcp-server: T3839: support name-servers and domain config per shared-networkChristian Poessinger
DHCP servers "shared-network" level only makes sense if one can specify configuration items that can be inherited by individual subnets. This is now possible for name-servers and the domain-name. set service dhcp-server shared-network-name LAN domain-name 'vyos.net' set service dhcp-server shared-network-name LAN name-server '192.0.2.1'
2021-09-18dhcp-server: T3838: rename dns-server to name-server nodeChristian Poessinger
IPv4 DHCP uses "dns-server" to specify one or more name-servers for a given pool. In order to use the same CLI syntax this should be renamed to name-server, which is already the case for DHCPv6.
2021-09-15typo: remove unnecessary 'i' from helpJavinator9889
2021-09-06pki: xml: T3642: use "txt" as format identifierChristian Poessinger
2021-09-04bgp: T3798: "replace-as" option can only be used when "no-prepend" is definedChristian Poessinger
Commit 5f1c1ae4 ("bgp: T3798: add support for neighbor local-as <n> replace-as") added support for a new CLI option when the local-as is changed for a specified neighbor or peer-group. There was an error in the CLI / design as the "replace-as" option can only be used when "no-prepend" is defined. Thus "no-prepend" became a <node> and the new "replace-as" leafNode is now a child of "no-prepend".
2021-09-03bgp: T3798: add support for neighbor local-as <n> replace-asChristian Poessinger
2021-08-29xml: add missing "u32:" value declarator on integer rangesChristian Poessinger
2021-08-29ospf: T3236: add possibility to redistribute "table"Christian Poessinger
Add new CLI command: * "set protocols ospf redistribute table <n>"
2021-08-29ospf: xml: T3236: update help stringsChristian Poessinger
2021-08-24bgp: T3759: "l2vpn evpn" and ipv4/ipv6 safi route-targets differChristian Poessinger
The "l2vpn evpn" address-family route-target command only accepts a single route-target value consisting of (A.B.C.D:MN|EF:OPQR|GHJK:MN). The "ipv4-unicast or ipv6-unicast" address-family route-target command for VPNs support multiple, whitespace separated route-target values. This commit adds a new custom validator named "bgp-route-target" with a --single and a --multi option to pass one or more route-target values.
2021-08-21pppoe: T1318: implement missing access-concentrator CLI optionChristian Poessinger
2021-08-21xml: interfaces: use one common building block for "disable-forwarding"Christian Poessinger
Both building blocks only differed in the help text, so use IP for both IPv4 and IPv6.
2021-08-21interfaces: T3090: migrate adjust-mss from "firewall options" to "interface" ↵Christian Poessinger
level Getting rid of "set firewall options" and move it from: set firewall options interface ethX adjust-mss 1400 set firewall options interface ethX adjust-mss6 1400 to: set interfaces ethernet ethX ip adjust-mss 1400 set interfaces ethernet ethX ipv6 adjust-mss 1400 In addition add an extra option called clamp-mss-to-pmtu instead of a value.
2021-08-20bgp: T3759: add IPv4/IPv6 unicast AFI route-map for VPN import/exportChristian Poessinger
This adds the following new commands: set protocols bgp address-family ipv4-unicast route-map vpn export foo-map-out set protocols bgp address-family ipv4-unicast route-map vpn import foo-map-in set protocols bgp address-family ipv6-unicast route-map vpn export foo-map-out set protocols bgp address-family ipv6-unicast route-map vpn import foo-map-in
2021-08-20bgp: T3759: fix DOS -> UNIX line endings on route-target building blocksChristian Poessinger
2021-08-20bgp: T3759: create common export/import building block for re-usable route-mapsChristian Poessinger
2021-08-20xml: remove superfluous "interface" prefix from interface includesChristian Poessinger
2021-08-18bgp: T3759: add l3vpn "route-target vpn" commandsChristian Poessinger
Add the following new commands: * set protocols bgp address-family ipv4-unicast route-target vpn both 1.1.1.1:100 * set protocols bgp address-family ipv4-unicast route-target vpn export 1.1.1.1:100 * set protocols bgp address-family ipv4-unicast route-target vpn import 1.1.1.1:100
2021-08-18bgp: evpn: T1513: re-structure route-target XML blocksChristian Poessinger
Make the both, export and import XML block re-usable by the IPv4 AFI.
2021-08-18bgp: T3759: fix "label vpn" help stringChristian Poessinger
2021-08-18bgp: T3759: add l3vpn "rd" route-distinguisher commandsChristian Poessinger
Add the following new commands: * set protocols bgp address-family ipv4-unicast rd vpn export * set protocols bgp address-family ipv6-unicast rd vpn export
2021-08-18bgp: T3759: add l3vpn "label vpn export" commandsChristian Poessinger
Add the following new commands: * set protocols bgp address-family ipv4-unicast label vpn export (auto | 0-1048575) * set protocols bgp address-family ipv6-unicast label vpn export (auto | 0-1048575)
2021-08-18bgp: T3759: import/export is for AFI "ipv4 unicast" not "ipv4 multicast"Christian Poessinger
2021-08-17bgp: T3759: add l3vpn "import vrf" commandsChristian Poessinger
2021-08-17bgp: T3759: add l3vpn import/export vpn command for IPv4/IPv6 AFIChristian Poessinger
2021-08-17bgp: T2174: create building block for path-limit which is used in IPv4/IPv6 AFIChristian Poessinger
2021-08-17xml: include: add error message to port-numberChristian Poessinger
2021-08-17isis: T1316: use common redistribute XML building block for IPv4 and IPv6Christian Poessinger
2021-08-15ospf: T3757: support to configure area at an interface levelChristian Poessinger
FRR supports configuring either network prefixes per area, or assign an interface to an area to participate in the routing process. This is already well known from other venders and supported by FRR. A valid VyOS OSPF configuration would then look like: vyos@vyos# show protocols ospf { interface dum0 { area 0 } interface eth0.201 { area 0 authentication { md5 { key-id 10 { md5-key vyos } } } dead-interval 40 hello-interval 10 priority 1 retransmit-interval 5 transmit-delay 1 } log-adjacency-changes { detail } parameters { abr-type cisco router-id 172.18.254.201 } passive-interface default passive-interface-exclude eth0.201 }
2021-08-15conntrack: T3275: migrate 'disable' syntax to 'enable' syntax for the new ↵Lulu Cathrinus Grimalkin
default behavior
2021-08-11bgp: T3739: add common route-distinguisher XML building blockChristian Poessinger
2021-08-01Merge pull request #943 from Cheeze-It/currentChristian Poessinger
isis: T3693: Adding IPv6 redistribution to ISIS
2021-07-31isis: T3693: Adding IPv6 redistribution to ISISCheeze_It
In this commit we add the ability to redistribute into ISIS for IPv6 address family.
2021-07-30bgp: T1176: Add solo option for neighborViacheslav
2021-07-25xml: add building block for RADIUS nas-identifierChristian Poessinger
2021-07-22xml: add building block for "local-users"Christian Poessinger
2021-07-20pki: eapol: T3642: Migrate EAPoL to use PKI configurationsarthurdev
2021-07-17xml: provide common "pre-shared-secret" include blockChristian Poessinger
2021-07-17xml: provide common "dhcp-interface" include blockChristian Poessinger
2021-07-07pki: T3642: Migrate rsa-keys to PKI configurationsarthurdev
2021-07-04ipsec: T1210: T1251: add "local" traffic-selector include definitionChristian Poessinger
Used by both site2site and remote-access/road-warrior VPN connections.
2021-07-04ipsec: T2816: add include definition for ipsec local-addressChristian Poessinger
2021-07-03ipsec: T2816: provide x509 certificate base auth building blocksChristian Poessinger
2021-07-03ipsec: T2816: provide esp and ike-group XML building blockChristian Poessinger
2021-07-02xml: provide building block for a generic description nodeChristian Poessinger
2021-07-01Merge branch 'pki_ipsec' of https://github.com/sarthurdev/vyos-1x into pki-cliChristian Poessinger
* 'pki_ipsec' of https://github.com/sarthurdev/vyos-1x: pki: ipsec: T3642: Update migration script to account for file permission issues pki: ipsec: T3642: Migrate IPSec to use PKI configuration pki: T3642: New PKI config and management
2021-06-29pki: ipsec: T3642: Migrate IPSec to use PKI configurationsarthurdev
2021-06-29pppoe-server: T3405: Add interface cache featureDmitriyEshenko
2021-06-29pki: T3642: New PKI config and managementsarthurdev
2021-06-26nat: T1083: add translation options for persistent/random mapping of address ↵Igor Melnyk
and port Tested using: set destination rule 100 inbound-interface 'eth0' set destination rule 100 translation address '19.13.23.42' set destination rule 100 translation options address-mapping 'random' set destination rule 100 translation options port-mapping 'none' set source rule 1000 outbound-interface 'eth0' set source rule 1000 translation address '122.233.231.12' set source rule 1000 translation options address-mapping 'persistent' set source rule 1000 translation options port-mapping 'fully-random'
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-16 15:19:53 +0000