summaryrefslogtreecommitdiff
path: root/interface-definitions/include
AgeCommit message (Collapse)Author
2021-12-12bgp: T4069: add "parameters suppress-fib-pending" CLI optionChristian Poessinger
This command is applicable at the global level and at an individual bgp level. If applied at the global level all bgp instances will wait for fib installation before announcing routes and there is no way to turn it off for a particular BGP vrf.
2021-12-12bgp: T4069: add "parameters shutdown" CLI optionChristian Poessinger
Administrative shutdown of all peers of a bgp instance. Drop all BGP peers, but preserve their configurations. The peers are notified in accordance with RFC 8203 by sending a NOTIFICATION message with error code Cease and subcode Administrative Shutdown prior to terminating connections. This global shutdown is independent of the neighbor shutdown, meaning that individually shut down peers will not be affected by lifting it.
2021-12-12bgp: T4069: add "parameters reject-as-sets" CLI optionChristian Poessinger
This command enables rejection of incoming and outgoing routes having AS_SET or AS_CONFED_SET type.
2021-12-12bgp: T4069: add "parameters minimum-holdtime <n>" CLI optionChristian Poessinger
This command allows user to prevent session establishment with BGP peers with lower holdtime less than configured minimum holdtime. When this command is not set, minimum holdtime does not work.
2021-12-12bgp: T4069: add "parameters fast-convergence" CLI optionChristian Poessinger
Whenever BGP peer address becomes unreachable we must bring down the BGP session immediately. Currently only single-hop EBGP sessions are brought down immediately. IBGP and multi-hop EBGP sessions wait for hold-timer expiry to bring down the sessions. This new configuration option helps user to teardown BGP sessions immediately whenever peer becomes unreachable. This configuration is available at the bgp level. When enabled, configuration is applied to all the neighbors configured in that bgp instance.
2021-12-12bgp: T3967: add "parameters conditional-advertisement timer <n>" optionChristian Poessinger
Set the period to rerun the conditional advertisement scanner process. The default is 60 seconds.
2021-12-12xml: bgp: fix "shutdown" help string (remove whitespace)Christian Poessinger
2021-12-09bgp: T4058: add support for BFD profilesChristian Poessinger
2021-12-09xml: T4058: provide building block for BFD profilesChristian Poessinger
2021-12-09xml: include: create dedicated bfd subfolderChristian Poessinger
2021-12-09Merge pull request #1024 from lucasec/dns-authoritativeChristian Poessinger
T562: Config syntax for defining DNS forward authoritative zones
2021-12-06Revert "bfd: T3753: FRR 8.1 uses a default echo-interval of 50 - reflect ↵Christian Poessinger
this in CLI" This reverts commit 49047b88c9bac0b2e007ccce7ac7d42e82ee0a2b. > Echo mode is only available for single hop sessions
2021-12-06bfd: T3753: FRR 8.1 uses a default echo-interval of 50 - reflect this in CLIChristian Poessinger
2021-12-06xml: ntp: remove indentChristian Poessinger
2021-12-06xml: vrf: use "txt" in valueHelpChristian Poessinger
2021-12-06Merge pull request #1077 from sever-sever/T3829Christian Poessinger
netns: T3829: Ability to configure network namespaces
2021-12-04bgp: T4042: bugfix route-distinguisher value rangeChristian Poessinger
2021-12-04validators: T4042: rename bgp-route-target -> bgp-rd-rtChristian Poessinger
2021-12-04bfd: T4043: add support for passive modeChristian Poessinger
Mark session as passive: a passive session will not attempt to start the connection and will wait for control packets from peer before it begins replying. This feature is useful when you have a router that acts as the central node of a star network and you want to avoid sending BFD control packets you don't need to. The default is active-mode
2021-12-04xml: bfd: hint default values on CLI tab completeChristian Poessinger
2021-11-29Merge pull request #1076 from DmitriyEshenko/current-22112021-01Christian Poessinger
tftp: T4012: Add TFTP VRF support
2021-11-28ospfv3: T3928: add VRF supportChristian Poessinger
set vrf name foo protocols ospfv3
2021-11-27ospf: T3753: adjust to CLI options new in FRR 8.0Christian Poessinger
FRR 7.5 router ospf passive-interface default no passive-interface eth0.202 Changed int FRR 8 to interface eth0.202 no ip ospf passive ! router ospf ospf router-id 172.18.254.202 log-adjacency-changes detail passive-interface default
2021-11-24conf-mode: NAT interface definition typo fixerkin
2021-11-23netns: T3829: Add XML for netns CLI configurationViacheslav
2021-11-23tftp: T4012: Add TFTP VRF supportDmitriyEshenko
2021-11-19conf-mode:T3998:bgp route-target completion incorrect descriptionsrividya0208
Corrected the help description for route target from "Specify route distinguisher" to "Specify route target list"
2021-11-07xml: provide and use common interface-name building blocksChristian Poessinger
2021-11-07policy: T2425: add generic-interface XML building blockChristian Poessinger
2021-11-03sstp: accel-ppp: T3964: add missing input validator for static-ip assignmentChristian Poessinger
2021-11-03sstp: T2566: use XML defaultValue over Jinja2 hardcoded valueChristian Poessinger
(cherry picked from commit 01ed77040ec9493e4ca1cf868ff3c22847da4487)
2021-11-03sstp: T2566: Fix to allow IPv6 only poolsViacheslav
To allow IPv6 only for vpn sstp sessions we have to add 'ppp-options' which can disable IPv4 allocation explicity. Additional IPv6 ppp-options and fix template for it. (cherry picked from commit dd036c62d1370f655a8d2075577597f24ffff7dc)
2021-10-26bgp: T3945: Add route-map for aggregate-addressViacheslav
2021-10-12T562: Config syntax for defining DNS forward authoritative zonesLucas Christian
2021-10-04bgp: T3741: "parameter default no-ipv4-unicast" is now a default optionChristian Poessinger
2021-09-26ospf: T3757: add completion help when refering to area IDChristian Poessinger
This extends commit 6f87d8c910 ("ospf: T3757: support to configure area at an interface level") with a completion helper to show which Area ID is already in use when configuring the area for an interface.
2021-09-26ospfv3: T3859: add "log-adjacency-changes" CLI commandChristian Poessinger
2021-09-25bgp: T3657: add "neighbor fe80::202 interface source-interface 'eth1'" commandChristian Poessinger
2021-09-25bgp: xml: T2387: use "generic-description" building block over BGP specific oneChristian Poessinger
There is no benefit in the BGP specific definition of a "description" node.
2021-09-21vrrp: keepalived: T3847: add common transition-script building blockChristian Poessinger
This is used for both VRRP groups and sync-groups.
2021-09-21dhcp-server: T3839: support domain-search and ntp-server config per ↵Christian Poessinger
shared-network
2021-09-21xml: ospf: fix routing-passive-interface-xml.i includeChristian Poessinger
Commit a8b2e52148d ("xml: Update routing-passive-interface-xml.i file extension to standard .xml.i") only altered the RIP include statement but did not alter the OSPF include.
2021-09-20xml: Update routing-passive-interface-xml.i file extension to standard .xml.isarthurdev
2021-09-19xml: dhcp-server: move building blocks to dhcp subdirectoryChristian Poessinger
2021-09-19dhcp-server: T3841: add option to perform ICMP check before address assignmentChristian Poessinger
2021-09-18dhcp-server: T3839: support name-servers and domain config per shared-networkChristian Poessinger
DHCP servers "shared-network" level only makes sense if one can specify configuration items that can be inherited by individual subnets. This is now possible for name-servers and the domain-name. set service dhcp-server shared-network-name LAN domain-name 'vyos.net' set service dhcp-server shared-network-name LAN name-server '192.0.2.1'
2021-09-18dhcp-server: T3838: rename dns-server to name-server nodeChristian Poessinger
IPv4 DHCP uses "dns-server" to specify one or more name-servers for a given pool. In order to use the same CLI syntax this should be renamed to name-server, which is already the case for DHCPv6.
2021-09-15typo: remove unnecessary 'i' from helpJavinator9889
2021-09-06pki: xml: T3642: use "txt" as format identifierChristian Poessinger
2021-09-04bgp: T3798: "replace-as" option can only be used when "no-prepend" is definedChristian Poessinger
Commit 5f1c1ae4 ("bgp: T3798: add support for neighbor local-as <n> replace-as") added support for a new CLI option when the local-as is changed for a specified neighbor or peer-group. There was an error in the CLI / design as the "replace-as" option can only be used when "no-prepend" is defined. Thus "no-prepend" became a <node> and the new "replace-as" leafNode is now a child of "no-prepend".