summaryrefslogtreecommitdiff
path: root/interface-definitions/include
AgeCommit message (Collapse)Author
2021-04-15bgp: T2771: add vpn, multicast, flowspec address familiesCheeze-It
In this commit we add more address families within BGP. This should bring VyOS the ability to enable the rest of the capabilities within FRR. Co-authored-by: Cheeze_It <none@none.com>
2021-04-09bgp: evpn: T1513: add support for ipv4/ipv6 prefix routes advertisementsChristian Poessinger
set vrf name red protocols bgp address-family l2vpn-evpn advertise ipv4 unicast
2021-04-09bgp: T1711: remove extra script completion helper on peer-groupsChristian Poessinger
After commit 73557d68 ("bgp: T1711: remove ASN tagNode and move to 'local-as'") when the BGP tag node was removed there is no need anymore for a script based completion helper, we can rather rely on the build in "path" variant.
2021-04-08ospf: T2271: zebra route-map can only be set for default VRFChristian Poessinger
2021-04-08bgp: T2271: zebra route-map can only be set for default VRFChristian Poessinger
2021-04-08xml: route-map: add missing constraintsChristian Poessinger
Port over the regex used in the old node.def code-base and make this limitation also live on the new CLI interface.
2021-04-08isis: T1316: re-use common route-map XML building blockChristian Poessinger
2021-04-08static: T3280: re-use common route-map XML building blockChristian Poessinger
2021-04-07vrf: T3344: re-add virtual network identifierChristian Poessinger
Commit 548d9057e3e (vrf: T3344: move dynamic routing protocols under "vrf name <name> protocols") temporary removed the possibility to specify the VNI for a given VRF to to changing of the CLI configuration nodes. As VNI is set inside zebra, we can re-use the now widely deployed frr python library to configure and change the configuration without any interference to other FRR daemons.
2021-04-02interfaces: dhcp-client: T3454: add reject optionCharles Surett
Sometimes a modem might give a local IP before it retrieves a WAN IP. This can be an issue with failover routes, since the default route will get overridden.
2021-03-29bgp: T1711: remove ASN tagNode and move to "local-as"Christian Poessinger
Every time when set configuration bgp, you need set AS number. There is very less benefit in this system so the AS number is moved from a tagNode level down to a leafNode with the name "local-as", same as on the neighbor or peer-group level. This changes the CLI configuration from: set protocols bgp 100 neighbor 10.10.1.2 remote-as 200 to set protocols bgp local-as 100 set protocols bgp neighbor 10.10.1.2 remote-as 200
2021-03-21isis: T3417: drop artificial "domain" node identifying the IS-IS process nameChristian Poessinger
As we and FRR do not support multiple FRR process instances, there is no need to make this configurable for a user. We rather rely on a solid default "VyOS".
2021-03-21isis: T3417: add VRF supportChristian Poessinger
VRF support can be tested using: set vrf name red table 1000 set vrf name red protocols isis domain FOOO set vrf name red protocols isis net 49.0001.1921.6800.1002.00 set vrf name red protocols isis interface eth1
2021-03-21xml: isis: ospf: re-arrange include blocksChristian Poessinger
2021-03-17ipv6: eui64: T3413: add custom validatorChristian Poessinger
VyOS 1.2 (crux) rejected prefixes other then of site /64. [ interfaces ethernet eth0 ipv6 address eui64 2006:ab00:abe1::2/127 ] Error: Prefix lenght is 127. It must be 64. Same should be done on VyOS 1.3 and newer
2021-03-17ipv6: eui64: T3413: improve valueHelp string for address assignmentChristian Poessinger
2021-03-14xml: accel-ppp: move building blocks to subfolderChristian Poessinger
As the amount of include files now has reached a certain amount, it is getting more and more crowsded, thuse introducing "per topic" subdirectories on the filesystem to keep a clean structure makes sense.
2021-03-14static: T3280: move building blocks to subfolderChristian Poessinger
As the amount of include files now has reached a certain amount, it is getting more and more crowsded, thuse introducing "per topic" subdirectories on the filesystem to keep a clean structure makes sense.
2021-03-14rip: xml: T2547: move building blocks to subfolderChristian Poessinger
As the amount of include files now has reached a certain amount, it is getting more and more crowsded, thuse introducing "per topic" subdirectories on the filesystem to keep a clean structure makes sense.
2021-03-14xml: T1579: re-arrange xml interface include building blocksChristian Poessinger
As the amount of include files now has reached a certain amount, it is getting more and more crowsded, thuse introducing "per topic" subdirectories on the filesystem to keep a clean structure makes sense.
2021-03-14Merge pull request #733 from sever-sever/T2425Christian Poessinger
conf-mode: T2425: Add XML for policy-lists
2021-03-14xml: include: fix typo on include commentChristian Poessinger
When including XML files they all contained a comment from where the snipped had actually been included from. The comment had been "included start" and "included end" instead of "include start" and "include end". This commit corrects the glitch.
2021-03-14xml: ospf: consolidate router-id and distance settings in common include filesChristian Poessinger
2021-03-14vrf: bgp: T2271: create individual BGP process for specified VRF nameChristian Poessinger
The following VyOS CLI config vrf red { bgp 100 { neighbor 1.1.1.1 { peer-group foo } peer-group foo { passive password bar remote-as 200 } } } Will generaste the FRR configuration: ! router bgp 100 vrf red no bgp ebgp-requires-policy no bgp network import-check neighbor foo peer-group neighbor foo remote-as 200 neighbor foo password bar neighbor foo passive neighbor 1.1.1.1 peer-group foo !
2021-03-14vrf: bgp: T2271: re-arrange xml include building blocksChristian Poessinger
As the amount of include files now has reached a certain amount, this also introduces "per topic" subdirectories on the filesystem to keep a clean structure. This commit is related to the change in the OSPF structure done in 952c52ef01 ("vrf: ospf: T2271: re-arrange xml include building blocks").
2021-03-14xml: include: move route-map from ospf to generic sectionChristian Poessinger
2021-03-14bgp: T2387: add completion helper when specifying a peer-groupChristian Poessinger
2021-03-13vrf: ospf: T2271: re-arrange xml include building blocksChristian Poessinger
In order to fully re-use the XML based OSPF CLI definition for per-VRF routing, the file structure needs to be reorganized and the common OSPF definition is moved to its dedicated ospf-common-config.xml.i file, which can then be fully re-included at the VRF level. As the amount of include files now has reached a certain amount, this also introduces "per topic" subdirectories on the filesystem to keep a clean structure.
2021-03-10bgp: evpn: T1513: add support for per VNI route-distinguished and route-targetChristian Poessinger
set protocols bgp 65010 address-family l2vpn-evpn vni 100 route-target both 516:10516 set protocols bgp 65010 address-family l2vpn-evpn vni 100 rd 192.168.0.1:514 Todo: add verify() step to check if at least one evpn enabled BGP neighbor exits, else FRR will error out with: This command is only supported under EVPN VRF
2021-03-08bgp: T3391: migrate old IPv4 only maximum-paths config to new syntaxChristian Poessinger
2021-03-07bgp: T3391: add per AFI maximum-paths supportChristian Poessinger
* set protocols bgp ASN address-family ipv4-unicast maximum-paths * set protocols bgp ASN address-family ipv4-unicast maximum-paths-ibgp * set protocols bgp ASN address-family ipv6-unicast maximum-paths * set protocols bgp ASN address-family ipv6-unicast maximum-paths-ibgp
2021-03-07vxlan: T3319: use default ttl of 16Christian Poessinger
VyOS 1.2 had a default ttl of 16 hardcoded to the node.def file [1], so until this is handled via a migration script we have to obey that particular setting. [1]: https://github.com/vyos/vyatta-cfg-system/blob/crux/templates/interfaces/vxlan/node.def#L23
2021-03-06bgp: T2387: add interface completion helper for update-sourceChristian Poessinger
2021-03-04Merge pull request #729 from bstepler/T3300Christian Poessinger
dhcp: T3300: add DHCP default route distance
2021-02-28vxlan: T1513: add dont-fragment CLI optionChristian Poessinger
2021-02-28vxlan: T3369: add underlay IPv6 supportChristian Poessinger
2021-02-28tunnel: T3366: rename remote-ip to remoteChristian Poessinger
Streamline the CLI configuration where we try to use remote on other interfaces like vxlan, geneve.
2021-02-28tunnel: T3366: rename local-ip to source-addressChristian Poessinger
Streamline the CLI configuration where we try to use source-address when creating connections which are especially sourced from a discrete address.
2021-02-28vxlan: T1513: add additional EVPN related CLI optionsChristian Poessinger
A VXLAN tunnel may now get a TTL, TOS, Flowlabel option specified. It is also possible to disable learning of unknown addresses into the forwarding database.
2021-02-24xml: add missing constaint to source-interface includeChristian Poessinger
2021-02-24route: static: T2450: add missing "dhcp-interface" route optionChristian Poessinger
As thought in the beginning the dhcp-interface route option can not be superseeded by the interface option. When a route is installed for a DHCP interface, that interface is usually a broadcast interface which can not be used for plain interface-based routes. The old Vyatta logic was migrated to Python where the current received next-hop address from the DHCP interface is installed as next-hop address.
2021-02-22xml: tunnel: erspan: make individual parameter nodes reusableChristian Poessinger
VXLAN will get tos, ttl and flowlabel options thus make individual parameter settings reusable by splitting tunnel-parameters-ip.xml.i into individual files.
2021-02-19bgp: T3331: Fix set unsuppress-map for neighborsever-sever
2021-02-15Merge pull request #732 from c-po/t3310-bfdJohn Estabrook
bfd: T3310: migrate to get_config_dict() and FRR reload
2021-02-15bgp: T1513: add per VRF vni supportChristian Poessinger
2021-02-15bfd: T3310: implement peer profile supportChristian Poessinger
2021-02-15bgp: T3311: remove remote-as from address-familyChristian Poessinger
When moving from Quagga to FRR the BGP address-family was extended by an invalid peer-group statement. FRR always moved a configured peer-group from the AFI level down to the neighbor level. With the migration to FRR reload we must take care about this by ourselves.
2021-02-15dhcp: T3300: add DHCP default route distanceBrandon Stepler
2021-02-15conf-mode: T2425: Add XML for policy-listssever-sever
2021-02-14bgp: T2315: add CLI options for addpath-tx-(all-paths|bestpath-per-AS)Christian Poessinger
* protocols bgp 65000 neighbor 192.0.2.1 address-family ipv4-unicast addpath-tx-all * protocols bgp 65000 neighbor 192.0.2.1 address-family ipv4-unicast addpath-tx-per-as * protocols bgp 65000 neighbor 2001:db8::1 address-family ipv6-unicast addpath-tx-all * protocols bgp 65000 neighbor 2001:db8::1 address-family ipv6-unicast addpath-tx-per-as