summaryrefslogtreecommitdiff
path: root/interface-definitions/include
AgeCommit message (Collapse)Author
2020-12-28webproxy: T563: op-mode: initial command supportChristian Poessinger
2020-12-28webproxy: T563: improve handling of cache-peersChristian Poessinger
2020-12-28xml: completion-help: add helper for all local assigned IP addressesChristian Poessinger
This replaces the Python script by a bash variant which is much faster as the Python interpreter does not need to be launched on invocation.
2020-12-27xml: fix valueHelp format stringsChristian Poessinger
A pre-defined list of common format strings to be used inside the <format> node of <valueHelp> is available from [1]. Adjust all currently in use <format> nodes to re-use the predefined strings over writing them on their own by even encapsulating the <> signs as &lt; and &gt;. [1]: https://github.com/vyos/vyatta-cfg/blob/5aec1a0429f2f/etc/bash_completion.d/vyatta-cfg#L515-L566
2020-12-25nat: T3092: add u32 qualifier in front of rule idChristian Poessinger
2020-12-23xml: include: accel: convert dos/unix line endingsChristian Poessinger
2020-12-23xdp: T2666: move CLI node to "interfaces ethernet <eth> xdp"Christian Poessinger
2020-12-22wireguard: T2206: improve help stringsChristian Poessinger
2020-12-20Revert "dhcpv6: T3134: add missing duid support"Christian Poessinger
This reverts commit 9541355433e202fade4692851bffa33ba9d48f44.
2020-12-20dhcpv6: T3134: add missing duid supportChristian Poessinger
2020-12-12xml: use "u32:" keyword when identifying port rangesChristian Poessinger
This will render the completion help more nicely.
2020-12-08mirror: T3089: support two-way traffic mirroringjack9603301
2020-12-04pppoe: T1579: reorganize "ipv6" CLI node include filesChristian Poessinger
Switch to common source file for "ipv6 address autoconf"
2020-12-04vyos.ifconfig: T1579: migrate "ip source-validation" option from ↵Christian Poessinger
vyatta-cfg-quagga
2020-12-04vlan: xml: T2653: use common include file for ip and ipv6 optionsChristian Poessinger
2020-12-04Merge pull request #621 from jack9603301/T3089Christian Poessinger
interface: T3089: Migrate port mirroring to vyos-1x
2020-12-03interface: T3089: Migrate port mirroring to vyos-1xjack9603301
2020-12-01vpn: ipsec: T3093: add XML for vpn ipsec conf-modeViacheslav Hletenko
2020-11-28nat: T3092: migrate to get_config_dict()Christian Poessinger
The NAT system consists out of nested tag nodes which makes manual parsing very hard. This is a perfect candidate for migrating this to get_config_dict() as there is already a smoketest in place. In addition this should make it easier to add features like static nat/hairpin.
2020-11-13Merge branch 'T1316_october' of https://github.com/sever-sever/vyos-1x into ↵Christian Poessinger
t1616-isis * 'T1316_october' of https://github.com/sever-sever/vyos-1x: isis: T1316: October steps
2020-11-07interfaces: dhcp-client: T2997: add option to not request DHCP router addressChristian Poessinger
Some might want to have an IP address handed out by a DHCP server but not want a default route to be installed. This can be done using the CLI command: "set interfaces ethernet eth2 dhcp-options no-default-route"
2020-11-07T2653: migrate "ip" and "ipv6" interface options to generic includesChristian Poessinger
This reduces duplicated #include statements as each interface type already contained the individual includes.
2020-11-02bgp-xml: T2387: Fix validators and add capability for new format bgpsever-sever
2020-10-28mtu: T2630: add support for ethernet MTU up to 16000 bytesChristian Poessinger
There is a Myricom 10G card with 16k MTU available.
2020-10-27Merge pull request #584 from sever-sever/T2387_octChristian Poessinger
bgp: T2387: Fix XML sheme for new bgp and bgp.py handler
2020-10-27bgp: T2387: Fix XML sheme for new bgp and bgp.py handlersever-sever
2020-10-27accel: T2631: Add option for radius disable-accountingsever-sever
2020-10-23isis: T1316: October stepssever-sever
2020-10-17sysctl-forwarding: T752: Add disable forwarding for ipv4sever-sever
2020-10-13pppoe-server: T2972: Increase rate limit validatorDmitriyEshenko
2020-10-06xml: include: add common helper file for listen-addressChristian Poessinger
2020-10-05Update search domain error message to match new validation logic.Lucas Christian
(also converted file to unix line endings)
2020-10-05dhcp(v6)-server: T2961: use fqdn validator wnd move to include snippedChristian Poessinger
Migrate the domain-search node (which occurs three times) to an includable snippet. Also re-use the fqdn validator to keep the regex patterns to as few locations as possible.
2020-10-04sstp: T2960: migrate to get_config_dict() and reusable templatesChristian Poessinger
2020-10-04l2tp: pptp: pppoe-server: T2953: use common Accel-PPP MTU include fileChristian Poessinger
2020-10-04l2tp: pptp: sstp: pppoe-server: T2953: use common include for client-ip-poolChristian Poessinger
2020-10-04xml: include: add comment about source filename to every include snippetChristian Poessinger
2020-10-03pppoe-server: T2956: make use of defaultValue list featureChristian Poessinger
2020-10-03accel-ppp: T2953: fix missing defaultValue on mppeChristian Poessinger
Commit ba050937 ("accel-ppp: T2953: drop redundant CLI definitions ") dropped the defaultValue of 'prefer' for MPPE making the smoketests fail. This has been corrected.
2020-10-02acces-ppp: T2953: drop redundant CLI definitionsChristian Poessinger
2020-10-01pppoe-server: T2936: move to get_config_dict()Christian Poessinger
For easier configuration read in (CLI) validation and also template rendering it makes sense to drop the old, single implementation and move to the new, generic get_config_dict() approach. Recurring configuration parts like ip-pool, ipv6-pool and nameservers have also been split our into individual templates which will be included through Jinja2 - leading to a single-source of the template sections, too.
2020-09-26accel-ppp: T2918: Add accounting interim jitter optionsever-sever
2020-09-26accel-ppp: T2917: Add Preallocate NAS-port-idsever-sever
2020-09-26xml: interface-definitions: fix wrong file extension of inlcude filesChristian Poessinger
Files which are included by others whouls have the ".xml.i" extension.
2020-09-22conf-mode: T2915: Adding lost option proxy-arp-pvlan for vlansever-sever
2020-09-20wwan: ifconfig: T2905: sync CLI nodes in dialup interfacesChristian Poessinger
Both PPPoE and WWAN interfaces are dialer interfaces handled by ppp, but use different CLI nodes for the same functionality. PPPoE has "connect-on-demand" to initiate an "on-demand" dialing and WWAN uses "ondemand" for this purpose. Rename WWAN "ondemand" node to "connect-on-demand".
2020-09-20vif-s: ifconfig: T2903: use explicit VLAN protocol over raw numbersChristian Poessinger
In the past we had to provide the ethertype value used for the VLAN protocol (0x88A8 -> 802.1ad or 0x8100 -> 802.1q). This should be changed to a more user friendly CLI node (protocol over ethertype) and 802.1ad over it's raw value 0x88A8. There is no need in presenting RAW information from the ethernet header to the user. Also iproute2 calls it protocol which makes way more sense over the "raw" value.
2020-08-23dhcpv6-pd: T2677: add support for rapid-commit optionChristian Poessinger
When rapid-commit is specified, dhcp6c will include a rapid-commit option in solicit messages and wait for an immediate reply instead of advertisements.
2020-08-22dhcpv6-pd: T2677: optimize CLI interface for PD configurationChristian Poessinger
The current CLI did not support multiple prefix-delegations per interface. Some ISPs only send one /64 to a client per prefix-delegation request, but they allow the customer to request multiple prefixes. The 'dhcpv6-options prefix-delegation' node has been renamed and converted to a tag node named 'dhcpv6-options pd'. The tag node specifies a PD request (>=0). In the past the user needed to know what prefix will be assigned and required to calculate the sla-len by himself. The 'sla-len' node was dropped and is now calculated in the background from the 'dhcpv6-options pd 0 length' node. It is no longer mandatory to supply the 'sla-id' node, if sla-id is not specified it is 'guessed' by counting upwards. Example configuration: ---------------------- ethernet eth1 { address dhcpv6 dhcpv6-options { pd 0 { length 56 interface eth2 { address 1 } } } } This will request a /56 assignment from the ISP and will delegate a /64 network to interface eth2. VyOS will use the interface address ::1 on the delegate interface (eth2) as its local address.
2020-08-06nat: T2764: increase maximum rule number to 999999Jernej Jakob
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 06:11:59 +0000