| Age | Commit message (Collapse) | Author |
|---|
|
- Migration script removes 'driver' and 'xdp-options' nodes.
- XDP logic is commented out in config verification and CLI tests, preserving code for future use.
- The rest of XDP-related code remains untouched
|
|
vpp: T8143: Incorrect mapping in IPFIX for bond interfaces
|
|
|
|
Some NICs as `AWS ENA VF` allow to use 16384 descriptors
|
|
If any dynamic rule is configured forwarding should be disabled because each
packet must be processed through the NAT session table to apply proper
translations
|
|
Add VPP IPFIX configuration commands:
```
set vpp ipfix active-timeout '8'
set vpp ipfix collector 192.0.2.2 port '2055'
set vpp ipfix collector 192.0.2.2 source-address '192.0.2.1'
set vpp ipfix flowprobe-record 'l2'
set vpp ipfix flowprobe-record 'l3'
set vpp ipfix flowprobe-record 'l4'
set vpp ipfix inactive-timeout '32'
set vpp ipfix interface eth0
set vpp ipfix interface eth1 direction 'both'
set vpp ipfix interface eth1 flow-variant 'ipv4'
```
|
|
Queue sizes must be a power of two and between VLIB_FRAME_SIZE=256 and 65535
https://github.com/FDio/vpp/blob/d39cc2bd9374f9df7e42ad39bb9fb8e2531d3da8/src/plugins/af_xdp/device.c#L588-L608
|
|
Execute commands for vpp sflow with API calls. Use values for polling interval and sampling rate from 'system sflow'. Add op-mode command
|
|
Remove no-syscall-lock from CLI and enable this option if interrupt/adaptive mode is enabled and workers are configured.
Also forbid interrupt mode for ixgbevf driver
|
|
|
|
restrict page sizes in xml
|
|
|
|
|
|
|
|
current configuration
|
|
It will be configured in section "system option host-resources"
|
|
* VPP: T7175
Added conf mode CLI for VPP sflow plugin and updated VPP template to include plugin.
* VPP: T7175: Conf mode CLI and startup template.
* T7175: VPP fix sFlow verify use vpp enstead of enable_vpp
* T7175: VPP add sFlow smoketest
* T7175: VPP remove unused config_changed variable
---------
Co-authored-by: Viacheslav <v.gletenko@vyos.io>
|
|
Some systems have default page-size 4K and it may cause an error
|
|
* T7424: Refactor and extend resource usage verification on commit for VPP CLI
T7424: Fix ruff errors
* T7424: Implement check for smoke tests runtime; reduce resource requirements for test environments
T7424: Fix errors in calculating the skipped and reserved CPU cores; Adjust default main heap size value.
* T7424: Refactor the CPU checks logic; Add total CPU usage check
T7424: Fix CPU reserve and skip cores calculations; Add total CPU usage check
T7424: Refactor smoketests to reflect new logic
* T7424: Refactor the CPU and memory checks logic
---------
Co-authored-by: oniko94 <onikolaiev94@outlook.com>
|
|
CLI:
```
set vpp acl ip tag-name <tag-name> rule <nn> action <permit|deny|permit-reflect>
set vpp acl ip tag-name <tag-name> rule <nn> source prefix <prefix>
set vpp acl ip tag-name <tag-name> rule <nn> source port <port|range>
set vpp acl ip tag-name <tag-name> rule <nn> destination prefix <prefix>
set vpp acl ip tag-name <tag-name> rule <nn> destination port <port>
set vpp acl ip tag-name <tag-name> rule <nn> protocol <protocol>
set vpp acl ip tag-name <tag-name> rule <nn> tcp-flags <fin|syn|rst|psh|ack|urg|ecn|cwr>
set vpp acl ip tag-name <tag-name> rule <nn> tcp-flags not <fin|syn|rst|psh|ack|urg|ecn|cwr>
set vpp acl ip interface <interface_name> input acl-tag <n> tag-name <tag-name>
set vpp acl ip interface <interface_name> output acl-tag <n> tag-name <tag-name>
set vpp acl macip tag-name <tag-name> rule <nn> prefix <prefix>
set vpp acl macip tag-name <tag-name> rule <nn> mac-address <mac>
set vpp acl macip tag-name <tag-name> rule <nn> mac-mask <mac-mask>
set vpp acl macip tag-name <tag-name> rule <nn> action <permit|deny>
set vpp acl macip interface <interface_name> tag-name <tag-name>
```
OP mode
```
show vpp acl ip tag-name <tag_name>
show vpp acl ip interface
show vpp acl macip tag-name <tag_name>
show vpp acl macip interface
```
|
|
CLI:
```
set vpp nat cgnat interface outside <interface> # multi
set vpp nat cgnat interface inside <interface> # multi
set vpp nat cgnat rule <rule> outside-prefix <prefix>
set vpp nat cgnat rule <rule> inside-prefix <prefix>
set vpp nat cgnat timeout udp <sec> # default 300
set vpp nat cgnat timeout tcp-established <sec> # default 7440
set vpp nat cgnat timeout tcp-transitory <sec> # default 240
set vpp nat cgnat timeout icmp <sec> # default 60
```
OP mode:
```
show vpp nat cgnat interfaces
show vpp nat cgnat mappings
show vpp nat cgnat sessions
clear vpp cgnat inside-address <address> port <port> external-address <address> port <port>
```
|
|
New CLI for static and dynamic NAT:
```
set vpp nat44 interface outside <interface> # multi
set vpp nat44 interface inside <interface> # multi
set vpp nat44 address-pool translation interface <interface> # multi
set vpp nat44 address-pool translation address <address> # multi
set vpp nat44 address-pool twice-nat interface <interface> # multi
set vpp nat44 address-pool twice-nat address <address> # multi
set vpp nat44 static rule <rule> external address <address>
set vpp nat44 static rule <rule> external port <port>
set vpp nat44 static rule <rule> local address <address>
set vpp nat44 static rule <rule> local port <port>
set vpp nat44 static rule <rule> protocol <protocol>
set vpp nat44 static rule <rule> options twice-nat
set vpp nat44 static rule <rule> options self-twice-nat
set vpp nat44 static rule <rule> options out-to-in-only
set vpp nat44 static rule <rule> options twice-nat-address <address>
set vpp nat44 exclude rule <rule> protocol <protocol>
set vpp nat44 exclude rule <rule> local-port <port>
set vpp nat44 exclude rule <rule> local-address <address>
set vpp nat44 exclude rule <rule> external-interface <interface>
```
Settings:
```
set vpp settings nat44 session-limit <limit> # default 64512
set vpp settings nat44 timeout udp <sec> # default 300
set vpp settings nat44 timeout tcp-established <sec> # default 7440
set vpp settings nat44 timeout tcp-transitory <sec> # default 240
set vpp settings nat44 timeout icmp <sec> # default 60
set vpp settings nat44 workers <list>
set vpp settings nat44 no-forwarding
```
|
|
New CLI
```
set vpp nat44 static rule 10 outside-interface 'eth0'
set vpp nat44 static rule 10 inside-interface 'eth1'
set vpp nat44 static rule 10 external address 192.168.122.10
set vpp nat44 static rule 10 external port 6545 # optional
set vpp nat44 static rule 10 protocol tcp|udp|icmp|all # optional, defaults to "all"
set vpp nat44 static rule 10 local address 100.64.0.10
set vpp nat44 static rule 10 local port 64010 # optional
```
|
|
* T7283: VPP add static NAT support
Add static mapping NAT implementation
```
set vpp nat44 static rule 10 outbound-interface 'eth0'
set vpp nat44 static rule 10 inbound-interface 'eth1'
set vpp nat44 static rule 10 destination address 192.168.122.10 # optional, if not set outbound interface ip address is used
set vpp nat44 static rule 10 destination port 6545 # optional
set vpp nat44 static rule 10 protocol tcp|udp|icmp|all # optional, defaults to "all"
set vpp nat44 static rule 10 translation address 100.64.0.10
set vpp nat44 static rule 10 translation port 64010 # optional
```
* Improve help strings (Daniil Baturin)
---------
Co-authored-by: Daniil Baturin <daniil@baturin.org>
|
|
T7189: VPP source of the tunnel interface should be checked and configured
|
|
T7181: VPP add initial source NAT implentation
|
|
Changed priority for VPP interfaces: all VPP interfaces must be configured after Ethernet interfaces
|
|
vd-275: Add loopback bvi interface for a bridge member
|
|
Allow to configure VPP loopback interface as BVI interface
In the VPP a bridge-domain is the L2 bridge and does not have
its own interface
Loopback is required if we want to ping from/to the bridge.
```
set vpp interfaces bridge br10 member interface lo23 bvi
```
|
|
Rename node `ip6` to common `ipv6` for vpp settings
|
|
T7077: Verify VPP memory default-hugepage-size
T7079: Verify VPP memory main-heap-page-size
T7080: Verify VPP statseg page-size
get available hugepage sizes
align memory main-heap-size by page size
validate host_resources max_map_count
|
|
Add initial source NAT implementation
```
set vpp nat44 source inbound-interface 'eth2'
set vpp nat44 source outbound-interface 'eth1'
set vpp nat44 source translation address '192.0.2.1-192.0.2.2'
```
Add initial simple implementation of the source NAT
In the future, we'll extend it to the rules if it is possible to do
via VPP API
|
|
T7168: Add IPsec XFRM netlink plugin and CLI
|
|
|
|
Add linux-xfrm-nl plugin
Add configuration commands for VPP IPsec
```
set vpp settings ipsec interface-type 'ipsec'
set vpp settings ipsec netlink batch-delay-ms '250'
set vpp settings ipsec netlink batch-size '150'
set vpp settings ipsec netlink rx-buffer-size '1024'
```
|
|
T7076: VPP check ethernet interface exist
|
|
|
|
|
|
LCP: enable by default route-no-paths
|
|
|
|
|
|
Add ability to configure multipoint mode.
Remote IP address in this case has to be 0.0.0.0
Only one tunnel with the same source IP is allowed in the
point-to-multipoint mode
set vpp interfaces gre gre0 mode 'point-to-multipoint'
set vpp interfaces gre gre0 remote '0.0.0.0'
set vpp interfaces gre gre0 source-address '192.0.2.1'
|
|
Add tunnel type
- erspan
- l3
- teb (Transparent Ethernet Bridge)
By default L3 GRE interfaces cannot be bridged to a bridge interface.
Add the ability to change tunnel type.
set vpp interfaces gre gre2 tunnel-type 'teb'
|
|
|
|
|
|
|
