summaryrefslogtreecommitdiff
path: root/interface-definitions
AgeCommit message (Collapse)Author
2022-04-07ipv6: T4346: delete (migrate) CLI command to disable IPv6 address familyChristian Poessinger
2022-04-07qos: T4284: rename "traffic-policy" node to "qos policy"Christian Poessinger
"set traffic-policy" now becomes "set qos policy" "set interface ethernet eth0 traffic-policy" now bvecomes "set qos interface eth0"
2022-04-07qos: T4284: support mirror and redirect on vlan subinterfacesChristian Poessinger
2022-04-07qos: T4284: support mirror and redirect on all interface typesChristian Poessinger
2022-04-06dns: forwarding: T4343: add CLI option for PowerDNS network-timeoutBracken
Makes the powerdns `network-timeout` setting configurable via: `service dns forwarding timeout`. The powerdns default is 1500ms, VyOS now explicitly sets the same default value or the configured value so that the setting can have a readily apparent default in the help, rather than the user having to know it's powerdns.
2022-04-06firewall: T4345: Fix incorrect rule limit rate syntaxsarthurdev
2022-04-04wifi: T4339: tab-completion results in "No such file or directory"Christian Poessinger
2022-04-04wwan: T4339: tab-completion results in "No such file or directory"Christian Poessinger
2022-04-04Merge pull request #1267 from sever-sever/T2580Christian Poessinger
ipoe: T2580: Add pools and gateway options
2022-04-04ipoe: T2580: Add pools and gateway optionsViacheslav Hletenko
Add new feature to allow to use named pools Can be used also with Radius attribute 'Framed-Pool' set service ipoe-server client-ip-pool name POOL1 gateway-address '192.0.2.1' set service ipoe-server client-ip-pool name POOL1 subnet '192.0.2.0/24'
2022-04-03isis: T3156: add segment routing local-block for ISISChristian Poessinger
2022-04-03xml: isis: T3236: create common high-low label value include blockChristian Poessinger
2022-04-03isis: T4336: add support for MD5 authentication password on a circuitChristian Poessinger
2022-04-01policy: T4329: Fix regex for extcommunity rtViacheslav Hletenko
Fix regex to allow to set several marks for extcommunity rt set extcommunity rt '65:24 65:23 192.168.2.1:11 192.168.0.2:222'
2022-03-31bgp: T4326: Add bgp parameter no-suppress-duplicatesViacheslav Hletenko
Add new bgp parameter 'no-suppress-duplicates' set protocols bgp parameters no-suppress-duplicates
2022-03-25xml: T4319: use common building block for table-size CLI optionChristian Poessinger
2022-03-25T4319: "system ip(v6)" must run before any interface operationChristian Poessinger
2022-03-24ipsec: T4288: bump config version 8 -> 9Christian Poessinger
2022-03-24Merge pull request #1251 from srividya0208/T4288aChristian Poessinger
ike-group: T4288 : close-action is missing in swanctl.conf
2022-03-24ike-group: T4288 : close-action is missing in swanctl.confsrividya0208
close-action parameter is missing in the swanctl.conf file
2022-03-23l2tpv3: T1923: remove duplicate mtu includeChristian Poessinger
2022-03-21qos: T4284: initial XML interface definitions for rewriteChristian Poessinger
2022-03-17OSPF : T4304: Set import/export filter inter-area prefixfett0
2022-03-09policy: T2493 ip-next-hop unchanged & peer-addressPaul Lettington
Also add ipv6-next-hop peer-address
2022-03-07ipsec prefix: T4275: Fix for prefix val_help of remote-access and s2s vpnsrividya0208
It accepts network as the input value but the completion help is showing ip address, continuation of previous commit
2022-03-03static: T4283: support "reject" routes - emit an ICMP unreachable when matchedChristian Poessinger
2022-03-03static: T4283: create re-usable XML interface definitions for blackholeChristian Poessinger
2022-03-03static: T4283: fix help string for route/route6Christian Poessinger
2022-03-01flow-accounting: T4277: support sending flow-data via VRF interfaceChristian Poessinger
It should be possible to send the gathered data via a VRF bound interface to the collector. This is somehow related to T3981 but it's the opposite side of the netflow process. set system flow-accounting vrf <name>
2022-02-28ipsec prefix: T4275: Incorrect val_help for local/remote prefixsrividya0208
It accepts network as the input value but the completion help is showing ip address
2022-02-28open-connect: T4274: extend RADIUS authentication timeoutRageLtMan
RADIUS authentication can be handled by a variety of mechanisms, including proxy for 2FA systems requiring user interaction with a separate device, token acquisition, or other time-consuming action. Given the delays required for certain 2FA implementations, a thirty second timeout can range from onerous to untenable. Accomodate the 2FA time requirements by extending the hard-coded RADIUS time limit from 30 seconds to 240. Co-authored-by: RageLtMan <rageltman [at] sempervictus>
2022-02-28ssh: T4273: bugfix cipher and key-exchange multi nodesChristian Poessinger
After hardning the regex validator to be preceeded with ^ and ending with $ it was no longer possible to have a comma separated list as SSH ciphers. The migrations cript is altered to migrate the previous comma separated list to individual multi node entries - cipher and key-exchange always had been multinodes - so this just re-arranges some values and does not break CLI compatibility
2022-02-26lldp: T4272: migrate to get_config_dict()Christian Poessinger
2022-02-25nat: T1083: use defaultValue from XML when handling translationsChristian Poessinger
2022-02-25zone-policy: T2199: bugfix defaultValue usageChristian Poessinger
Instead of hardcoding the default behavior inside the Jinaj2 template, all defaults are required to be specified inside teh XML definition. This is required to automatically render the appropriate CLI tab completion commands.
2022-02-25vpn: ipsec: T3093: add missing defaultValue entriesChristian Poessinger
2022-02-25monitoring: T3872: re-use "port" building block from port-number.xml.iChristian Poessinger
2022-02-25xml: webproxy: add comment about explicitly not set defaultValueChristian Poessinger
2022-02-25wireless: ifconfig: T2653: add missing defaultValue for mgmt-frame-protectionChristian Poessinger
2022-02-25dhcp-relay: T3095: add missing max-size default valueChristian Poessinger
2022-02-24scripts: T4269: node.def generator should automatically add default valuesChristian Poessinger
Since introducing the XML <defaultValue> node it was common, but redundant, practice to also add a help string indicating which value would be used as default if the node is unset. This makes no sense b/c it's duplicated code/value/characters and prone to error. The node.def scripts should be extended to automatically render the appropriate default value into the CLI help string. For e.g. SSH the current PoC renders: $ cat templates-cfg/service/ssh/port/node.def multi: type: txt help: Port for SSH service (default: 22) val_help: u32:1-65535; Numeric IP port ... Not all subsystems are already migrated to get_config_dict() and make use of the defaults() call - those subsystems need to be migrated, first before the new default is added to the CLI help.
2022-02-22Merge pull request #1230 from sever-sever/T1856Christian Poessinger
ipsec: T1856: Ability to set SA life bytes and packets
2022-02-21Merge pull request #1231 from sever-sever/T3948Christian Poessinger
ipsec: T3948: Add CLI site-to-site peer connection-type none
2022-02-21Merge pull request #1234 from srividya0208/T3656Christian Poessinger
vpn_ipsec: T3656: modified completion help for key-exchange
2022-02-21vpn_ipsec: T3656: modified completion help for key-exchangesrividya0208
In latest releases, default IKE version is removed, which allows the connection to be IKEv1 or IKEv2. The completion help shows IKEv1 as default so removed it.
2022-02-20vxlan: T4120: rename tunnel-remotes.xml.i -> tunnel-remote-multi.xml.iChristian Poessinger
2022-02-20vxlan: T4120: add ability to set multiple remotes (PR #1127)Andreas
VXLAN does support using multiple remotes but VyOS does not. Add the ability to set multiple remotes and add their flood lists using "bridge" command.
2022-02-20ipsec: T3948: Add CLI site-to-site peer connection-type noneViacheslav Hletenko
set vpn ipsec site-to-site peer 192.0.2.14 connection-type none
2022-02-20macsec: T4261: add dhcp client supportChristian Poessinger
2022-02-20ipsec: T1856: Ability to set SA life bytes and packetsViacheslav Hletenko
set vpn ipsec esp-group grp-ESP life-bytes '100000' set vpn ipsec esp-group grp-ESP life-packets '2000000'
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 14:25:41 +0000