summaryrefslogtreecommitdiff
path: root/interface-definitions
AgeCommit message (Collapse)Author
2023-11-07Merge pull request #2434 from sever-sever/T5702Christian Breunig
T5702: SNMP add interface-mib max-interfaces-number and prefix
2023-11-06T5702: SNMP add interface-mib max-interfaces-number and prefixViacheslav Hletenko
- Allow to configure only required interface prefixes set service snmp mib interface 'eth' set service snmp mib interface 'bond' include_ifmib_iface_prefix eth bond Sets the interface name prefixes to include in the IF-MIB data collection. For servers with a large number of interfaces (ppp, dummy, bridge, etc) the IF-MIB processing will take a large chunk of CPU for ioctl calls. A set of space separated interface name prefixes will reduce the CPU load for IF-MIB processing. For example, configuring "include_ifmib_iface_prefix eth dummy lo" will include only interfaces with these prefixes and ignore all others for IF-MIB processing. - Allow to configure maximum interface number set service snmp mib interface-max '100' ifmib_max_num_ifaces NUM Sets the maximum number of interfaces included in IF-MIB data collection. For servers with a large number of interfaces (ppp, dummy, bridge, etc) the IF-MIB processing will take a large chunk of CPU for ioctl calls (on Linux). Setting a reasonable maximum for the CPU used will reduce the CPU load for IF-MIB processing. For example, configuring "ifmib_max_num_ifaces 500" will include only the first 500 interfaces based on ifindex and ignore all others for IF-MIB processing.
2023-11-05ddclient: T5708: Migrate `timeout` to `interval`Indrajit Raychaudhuri
Time interval in seconds to wait between DNS updates would be a bit more intuitive as `interval` than `timeout`.
2023-11-02Merge pull request #2416 from c-po/evpn-mh-t5698Christian Breunig
T5698 EVPN ESI Multihoming
2023-11-02Merge pull request #2427 from sever-sever/T5704Christian Breunig
T5704: PPPoE L2TP SSTP IPoE add option max-concurrent-sessions
2023-11-02T5704: PPPoE L2TP SSTP IPoE add option max-concurrent-sessionsViacheslav Hletenko
Add `max-starting` option: [common] max-starting=N Specifies maximum concurrent session attempts which server may processed set service pppoe-server max-concurrent-sessions '30' Useful to prevent high CPU utilization and compat execution scripts per time.
2023-11-01T4726: Remove accel-ppp RADIUS vendor validatorsViacheslav Hletenko
The vendor name could contain Uppercase or lowercase symbols and not rely on the dictionary name but on dictionary value / # cat /usr/share/freeradius/dictionary.cisco | grep -i vendor VENDOR Cisco 9 Another example VENDOR Alcatel-IPD 6527 This way if we use `vendor=cisco` instead of `vendor=Cisco` it will not work at all Delete vendor validators
2023-11-01Merge pull request #2370 from sever-sever/T1797Viacheslav Hletenko
T1797: Delete VPP from vyos-1x as it is implemented in addon
2023-10-31nat: T5681: fix CLI versionChristian Breunig
Fix commit 51abbc0f1b2 ("T5681: Firewall,Nat and Nat66: simplified and standarize interface matcher (valid for interfaces and groups) in firewal, nat and nat66") that added a migrator but did not bump the version number.
2023-10-31Merge pull request #2413 from c-po/t5668-vxlanChristian Breunig
vxlan: T5668: add CLI knob to enable ARP/ND suppression
2023-10-30vxlan: T5699: migrate "external" CLI know to "parameters external"Christian Breunig
As we have a bunch of options under "paramteres" already and "external" is clearly one of them it should be migrated under that node as well.
2023-10-30vxlan: T5668: add CLI knob to enable ARP/ND suppressionChristian Breunig
In order to minimize the flooding of ARP and ND messages in the VXLAN network, EVPN includes provisions [1] that allow participating VTEPs to suppress such messages in case they know the MAC-IP binding and can reply on behalf of the remote host. In Linux, the above is implemented in the bridge driver using a per-port option called "neigh_suppress" that was added in kernel version 4.15. [1] https://www.rfc-editor.org/rfc/rfc7432#section-10
2023-10-30bgp: T5698: add support for EVPN MultihomingChristian Breunig
2023-10-30bond: T5698: add support for EVPN MultihomingChristian Breunig
set interfaces bonding bond10 evpn es-df-pref '50' set interfaces bonding bond10 evpn es-id '10' set interfaces bonding bond10 evpn es-sys-mac '01:23:45:67:89:ab' set interfaces bonding bond10 member interface 'eth3' set interfaces bonding bond10 mode '802.3ad'
2023-10-25T5681: Firewall,Nat and Nat66: simplified and standarize interface matcher ↵Nicolas Fort
(valid for interfaces and groups) in firewal, nat and nat66.
2023-10-24Merge pull request #2355 from nicolas-fort/T5643Christian Breunig
T5643: nat: add interface-groups to nat. Use same cli structure for i…
2023-10-22Merge pull request #2386 from c-po/vxlan-t5671Christian Breunig
vxlan: T5671: change port to IANA assigned default port
2023-10-20vxlan: T5671: change port to IANA assigned default portChristian Breunig
Currently VyOS VXLAN implementation uses the Linux assigned port 8472 that predates the IANA assignment. As Most other vendors use the IANA assigned port, follow this guideline and use the new default port 4789. Existing configuration not defining an explicit port number will be migrated to the old default port number of 8472, keeping existing configurations work!
2023-10-20T5667: BGP label-uniscat enable ecmpfett0
2023-10-19Merge pull request #2378 from c-po/bridge-t5670Christian Breunig
bridge: T5670: add missing constraint on "member interface" node
2023-10-19Merge pull request #2362 from nicolas-fort/T5541Christian Breunig
T5541: firewall zone: re add firewall zone-base firewall
2023-10-19Merge pull request #2377 from dmbaturin/T2897-no-clusterChristian Breunig
cluster: T2897: add a migration script for converting cluster to VRRP
2023-10-19Merge pull request #2344 from nicolas-fort/T5637Christian Breunig
T5637: add new rule at the end of base chains for default-actions and log capabilities
2023-10-19bridge: T5670: add missing constraint on "member interface" nodeChristian Breunig
One could specify a bridge member of VXLAN1 interface, but it is not possible to create a VXLAN interface with the name of VXLAN1 - prohibited by VXLAN interface name validator. Add missing interface-name validator code
2023-10-19cluster: T2897: add a migration script for converting cluster to VRRPDaniil Baturin
2023-10-17T1797: Delete VPP from vyos-1x as it is implemented in addonViacheslav Hletenko
2023-10-13T5541: firewall zone: re add firewall zone-base firewallNicolas Fort
2023-10-12Merge pull request #2277 from aapostoliuk/T5254-1-sagittaDaniil Baturin
bonding: T5254: Fixed changing ethernet when it is a bond member
2023-10-12openvpn: T5634: fix typoJohn Estabrook
2023-10-11Merge pull request #2353 from dmbaturin/T5634-no-more-blowfishJohn Estabrook
openvpn: T5634: Remove support for insecure DES and Blowfish ciphers
2023-10-12openvpn: T5634: Remove support for insecure DES and Blowfish ciphersDaniil Baturin
2023-10-11T5643: nat: add interface-groups to nat. Use same cli structure for ↵Nicolas Fort
interface-name|interface-group as in firewall.
2023-10-11Merge pull request #2342 from sever-sever/T5165Viacheslav Hletenko
T5165: Implement policy local-route source and destination port
2023-10-08Merge pull request #2263 from Cheeze-It/currentViacheslav Hletenko
T5530: isis: Adding loop free alternate feature
2023-10-06T5637: add new rule at the end of base chains for default-actions. This ↵Nicolas Fort
enables log capabilities for default-action in base chains. And of course, add option for enabling log for default-action
2023-10-06T5165: Implement policy local-route source and destination portViacheslav Hletenko
Add `policy local-route` source and destination port set policy local-route rule 23 destination port '222' set policy local-route rule 23 protocol 'tcp' set policy local-route rule 23 set table '123' set policy local-route rule 23 source port '8888' % ip rule show prio 23 23: from all ipproto tcp sport 8888 dport 222 lookup 123
2023-10-06T5530: isis: Adding loop free alternate featureCheeze_It
2023-10-03pppoe: T5630: allow to specify MRU in addition to already configurable MTUChristian Breunig
Set the MRU (Maximum Receive Unit) value to n. PPPd will ask the peer to send packets of no more than n bytes. The value of n must be between 128 and 16384, the default was always 1492 to match PPPoE MTU. A value of 296 works well on very slow links (40 bytes for TCP/IP header + 256 bytes of data). Note that for the IPv6 protocol, the MRU must be at least 1280. CLI: set interfaces pppoe pppoe0 mru 1280
2023-10-03bonding: T5254: Fixed changing ethernet when it is a bond memberaapostoliuk
If ethernet interface is a bond memeber: 1. Allow for changing only specific parameters which are specified in EthernetIf.get_bond_member_allowed_options function. 2. Added inheritable parameters from bond interface to ethernet interface which are scpecified in BondIf.get_inherit_bond_options. Users can change inheritable options under ethernet interface but in commit it will be copied from bond interface. 3. All other parameters are denied for changing. Added migration script. It deletes all denied parameters under ethernet interface if it is a bond member.
2023-09-30vrf: netns: T3829: T31: priority needs to be after netnsChristian Breunig
A network namespace can have VRFs assigned, thus we need to get the priorities right. This lowers both priorities in general as a VRF or NETNS needs to be available very early as services can run on top of them.
2023-09-30Merge pull request #2269 from indrajitr/ddclient-wait-timeChristian Breunig
ddclient: T5574: Support per-service cache management for providers
2023-09-30Merge pull request #2300 from nicolas-fort/T5600Christian Breunig
T5600: firewall: change constraints for inbound|outbound interface-name
2023-09-30ddclient: T5574: Support per-service cache management for servicesIndrajit Raychaudhuri
Add support for per-service cache management for ddclient providers via `wait-time` and `expiry-time` options. This allows for finer-grained control over how often a service is updated and how long the hostname will be cached before being marked expired in ddclient's cache. More specifically, `wait-time` controls how often ddclient will attempt to check for a change in the hostname's IP address, and `expiry-time` controls how often ddclient to a forced update of the hostname's IP address. These options intentionally don't have any default values because they are provider-specific. They get treated similar to the other provider- specific options in that they are only used if defined.
2023-09-30Merge pull request #2325 from sever-sever/T5165Christian Breunig
T5165: Migrate policy local-route rule x destination to address
2023-09-30Merge pull request #2303 from indrajitr/ddclient-misc-1Christian Breunig
ddclient: T5612: Miscellaneous improvements and fixes for dynamic DNS
2023-09-29T5165: Migrate policy local-route rule x destination to addressViacheslav Hletenko
Migrate policy local-route <destination|source> to node address replace 'policy local-route{v6} rule <tag> destination|source <x.x.x.x>' => 'policy local-route{v6} rule <tag> destination|source address <x.x.x.x>'
2023-09-29T5616: firewall: add option to be able to match firewall marks in firewall ↵Nicolas Fort
filter and in policy route.
2023-09-29Merge pull request #2256 from zdc/T5577-circinusChristian Breunig
T5577: Optimized PAM configs for RADIUS/TACACS+
2023-09-28mdns: T5615: Allow controlling IP version to use for mDNS repeaterIndrajit Raychaudhuri
This commit adds a new configuration option to the mDNS repeater service to allow controlling which IP version to use for mDNS repeater. Additionally, publishing AAAA record over IPv4 and A record over IPv6 is disabled as suggested. See: - https://github.com/lathiat/avahi/issues/117#issuecomment-1651475104 - https://bugzilla.redhat.com/show_bug.cgi?id=669627#c2
2023-09-28Merge pull request #2295 from sever-sever/T5217-synproxyChristian Breunig
T5217: Add firewall synproxy
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 11:22:27 +0000