summaryrefslogtreecommitdiff
path: root/interface-definitions
AgeCommit message (Collapse)Author
2023-10-08Merge pull request #2263 from Cheeze-It/currentViacheslav Hletenko
T5530: isis: Adding loop free alternate feature
2023-10-06T5530: isis: Adding loop free alternate featureCheeze_It
2023-10-03pppoe: T5630: allow to specify MRU in addition to already configurable MTUChristian Breunig
Set the MRU (Maximum Receive Unit) value to n. PPPd will ask the peer to send packets of no more than n bytes. The value of n must be between 128 and 16384, the default was always 1492 to match PPPoE MTU. A value of 296 works well on very slow links (40 bytes for TCP/IP header + 256 bytes of data). Note that for the IPv6 protocol, the MRU must be at least 1280. CLI: set interfaces pppoe pppoe0 mru 1280
2023-09-30vrf: netns: T3829: T31: priority needs to be after netnsChristian Breunig
A network namespace can have VRFs assigned, thus we need to get the priorities right. This lowers both priorities in general as a VRF or NETNS needs to be available very early as services can run on top of them.
2023-09-30Merge pull request #2269 from indrajitr/ddclient-wait-timeChristian Breunig
ddclient: T5574: Support per-service cache management for providers
2023-09-30Merge pull request #2300 from nicolas-fort/T5600Christian Breunig
T5600: firewall: change constraints for inbound|outbound interface-name
2023-09-30ddclient: T5574: Support per-service cache management for servicesIndrajit Raychaudhuri
Add support for per-service cache management for ddclient providers via `wait-time` and `expiry-time` options. This allows for finer-grained control over how often a service is updated and how long the hostname will be cached before being marked expired in ddclient's cache. More specifically, `wait-time` controls how often ddclient will attempt to check for a change in the hostname's IP address, and `expiry-time` controls how often ddclient to a forced update of the hostname's IP address. These options intentionally don't have any default values because they are provider-specific. They get treated similar to the other provider- specific options in that they are only used if defined.
2023-09-30Merge pull request #2325 from sever-sever/T5165Christian Breunig
T5165: Migrate policy local-route rule x destination to address
2023-09-30Merge pull request #2303 from indrajitr/ddclient-misc-1Christian Breunig
ddclient: T5612: Miscellaneous improvements and fixes for dynamic DNS
2023-09-29T5165: Migrate policy local-route rule x destination to addressViacheslav Hletenko
Migrate policy local-route <destination|source> to node address replace 'policy local-route{v6} rule <tag> destination|source <x.x.x.x>' => 'policy local-route{v6} rule <tag> destination|source address <x.x.x.x>'
2023-09-29T5616: firewall: add option to be able to match firewall marks in firewall ↵Nicolas Fort
filter and in policy route.
2023-09-29Merge pull request #2256 from zdc/T5577-circinusChristian Breunig
T5577: Optimized PAM configs for RADIUS/TACACS+
2023-09-28mdns: T5615: Allow controlling IP version to use for mDNS repeaterIndrajit Raychaudhuri
This commit adds a new configuration option to the mDNS repeater service to allow controlling which IP version to use for mDNS repeater. Additionally, publishing AAAA record over IPv4 and A record over IPv6 is disabled as suggested. See: - https://github.com/lathiat/avahi/issues/117#issuecomment-1651475104 - https://bugzilla.redhat.com/show_bug.cgi?id=669627#c2
2023-09-28Merge pull request #2295 from sever-sever/T5217-synproxyChristian Breunig
T5217: Add firewall synproxy
2023-09-28Merge pull request #2306 from sarthurdev/fw_helperJohn Estabrook
firewall: T5614: Add support for matching on conntrack helper
2023-09-27T5165: Add option protocol for policy local-routeViacheslav Hletenko
Add option `protocol` for policy local-route set policy local-route rule 100 destination '192.0.2.12' set policy local-route rule 100 protocol 'tcp' set policy local-route rule 100 set table '100'
2023-09-24firewall: T5614: Add support for matching on conntrack helpersarthurdev
2023-09-23ddclient: T5612: Relax hostname validation for apex and wildcard entryIndrajit Raychaudhuri
Some porvides (like 'namecheap') allow to use '@' or '*' as hostname prefix for apex and wildcard records. This commit relaxes the hostname validation to allow these prefixes.
2023-09-23ddclient: T5612: Enable TTL support for web-service based protocolsIndrajit Raychaudhuri
Enable TTL support for web-service based protocols in addition to RFC2136 based (nsupdate) protocol. Since TTL is not supported by all protocols, and thus cannot have a configuration default, the existing XML snippet `include/dns/time-to-live.xml.i` does not have common `<defaultValue>300</defaultValue>` anymore and is instead added explicitly whenever necessary.
2023-09-23ddclient: T5612: Refactor zone configurationIndrajit Raychaudhuri
Refactor zone configuration to use shared XML snippet for all cases.
2023-09-23ddclient: T5612: Fix VRF support for ddclient serviceIndrajit Raychaudhuri
Fix VRF support interface definition and configuration mode for ddclient to actually capture the VRF name and pass it to the template.
2023-09-21T5217: Add firewall synproxyViacheslav Hletenko
Add ability to SYNPROXY connections It is useful to protect against TCP SYN flood attacks and port-scanners set firewall global-options syn-cookies 'enable' set firewall ipv4 input filter rule 10 action 'synproxy' set firewall ipv4 input filter rule 10 destination port '22' set firewall ipv4 input filter rule 10 inbound-interface interface-name 'eth1' set firewall ipv4 input filter rule 10 protocol 'tcp' set firewall ipv4 input filter rule 10 synproxy tcp mss '1460' set firewall ipv4 input filter rule 10 synproxy tcp window-scale '7'
2023-09-21T5600: firewall: change constraints for inbound|outbound interface-name. Now ↵Nicolas Fort
user can use VRF, and negated VRF, and configuration wonn't be broken after reboot.
2023-09-20T5602: Reverse-proxy add option backup for backend serverViacheslav Hletenko
A `backup` server can be defined to take over in the case of all other backends failing set load-balancing reverse-proxy backend <tag> server <tag> address '192.0.2.3' set load-balancing reverse-proxy backend <tag> server <tag> port '8883' set load-balancing reverse-proxy backend <tag> server <tag> backup
2023-09-19Merge pull request #2284 from c-po/t5596-bgpChristian Breunig
bgp: T5596: add new features from FRR 9
2023-09-19Merge pull request #2285 from c-po/T5597-isisChristian Breunig
isis: T5597: add new features from FRR 9
2023-09-19firewall: ethernet: T4502: Add interface offload node and verify interface ↵sarthurdev
supports HW flowtable offload - Add required offload setting for interfaces + flowtable offload (hw-tc-offload) - Verification of interface support for hardware offloaded flowtables
2023-09-19firewall: T4502: Update to flowtable CLIsarthurdev
`set firewall flowtable <name> interface <ifname>` `set firewall flowtable <name> offload [software|hardware]` `set firewall [ipv4|ipv6] forward filter rule N action offload` `set firewall [ipv4|ipv6] forward filter rule N offload-target <name>`
2023-09-18isis: T5597: add new features from FRR 9Christian Breunig
* Add support for IS-IS advertise-high-metrics set protocols isis advertise-high-metrics * Add support for IS-IS advertise-passive-only set protocols isis advertise-passive-only
2023-09-18bgp: T5596: add new features from FRR 9Christian Breunig
* Add BGP Software Version capability (draft-abraitis-bgp-version-capability) set protocols bgp neighbor 192.0.2.1 capability software-version * Add BGP neighbor path-attribute treat-as-withdraw command set protocols bgp neighbor 192.0.2.1 path-attribute treat-as-withdraw
2023-09-18Merge pull request #2276 from sarthurdev/conntrackViacheslav Hletenko
conntrack: T5571: Refactor conntrack using vyos.configdep
2023-09-18conntrack: T5217: Add tcp flag matching to `system conntrack ignore`sarthurdev
- Moves MSS node out of `tcp-flags.xml.i` and into `tcp-mss.xml.i` - Update smoketest to verify TCP flag matching
2023-09-15Merge pull request #2273 from sever-sever/T5586Christian Breunig
T5586: Disable by default SNMP for Keeplived VRRP service
2023-09-15Merge pull request #2185 from sever-sever/T5261-newViacheslav Hletenko
T5261: Add AWS load-balancing tunnel handler
2023-09-15T5586: Disable by default SNMP for Keeplived VRRP serviceViacheslav Hletenko
AgentX does not work stable. From time to time we see the system service crashing/degrading if something is wrong with SNMP from util net-snmp. We should disable it by default and enable it only if configured. set high-availability vrrp snmp
2023-09-14Merge pull request #2062 from vfreex/simple-fastpath-supportViacheslav Hletenko
T4502: firewall: Add software flow offload using flowtable
2023-09-13TACACS: T5577: Added `mandatory` and `optional` modes for TACACS+zsdc
In CLI we can choose authentication logic: - `mandatory` - if TACACS+ answered with `REJECT`, authentication must be stopped and access denied immediately. - `optional` (default) - if TACACS+ answers with `REJECT`, authentication continues using the next module. In `mandatory` mode authentication will be stopped only if TACACS+ clearly answered that access should be denied (no user in TACACS+ database, wrong password, etc.). If TACACS+ is not available or other errors happen, it will be skipped and authentication will continue with the next module, like in `optional` mode.
2023-09-13RADIUS: T5577: Added `mandatory` and `optional` modes for RADIUSzsdc
In CLI we can choose authentication logic: - `mandatory` - if RADIUS answered with `Access-Reject`, authentication must be stopped and access denied immediately. - `optional` (default) - if RADIUS answers with `Access-Reject`, authentication continues using the next module. In `mandatory` mode authentication will be stopped only if RADIUS clearly answered that access should be denied (no user in RADIUS database, wrong password, etc.). If RADIUS is not available or other errors happen, it will be skipped and authentication will continue with the next module, like in `optional` mode.
2023-09-13T5576: Add BGP remove-private-as all optionViacheslav Hletenko
Add the ability to use the option all for remove-private-as. Remove private ASNs in outbound updates. all - Apply to all AS numbers set protocols bgp neighbor <tag> address-family ipv4-unicast remove-private-as all
2023-09-09T5567: Increase allowed range for maximum-object-size to 1000000 KB for the ↵Alain Lamar
webproxy service
2023-09-09Merge pull request #2179 from vfreex/add-mldChristian Breunig
T5518: Add basic MLD support
2023-09-09T4502: firewall: Add software flow offload using flowtableYuxiang Zhu
The following commands will enable nftables flowtable offload on interfaces eth0 eth1: ``` set firewall global-options flow-offload software interface <name> set firewall global-options flow-offload hardware interface <name> ``` Generated nftables rules: ``` table inet vyos_offload { flowtable VYOS_FLOWTABLE_software { hook ingress priority filter - 1; devices = { eth0, eth1, eth2, eth3 }; counter } chain VYOS_OFFLOAD_software { type filter hook forward priority filter - 1; policy accept; ct state { established, related } meta l4proto { tcp, udp } flow add @VYOS_FLOWTABLE_software } } ``` Use this option to count packets and bytes for each offloaded flow: ``` set system conntrack flow-accounting ``` To verify a connection is offloaded, run ``` cat /proc/net/nf_conntrack|grep OFFLOAD ``` This PR follows firewalld's implementation: https://github.com/firewalld/firewalld/blob/e748b97787d685d0ca93f58e8d4292e87d3f0da6/src/firewall/core/nftables.py#L590 A good introduction to nftables flowtable: https://thermalcircle.de/doku.php?id=blog:linux:flowtables_1_a_netfilter_nftables_fastpath
2023-09-09vxlan: T3700: support VLAN tunnel mapping of VLAN aware bridgesChristian Breunig
FRR supports a new way of configuring VLAN-to-VNI mappings for EVPN-VXLAN, when working with the Linux kernel. In this new way, the mapping of a VLAN to a VNI is configured against a container VXLAN interface which is referred to as a 'Single VXLAN device (SVD)'. Multiple VLAN to VNI mappings can be configured against the same SVD. This allows for a significant scaling of the number of VNIs since a separate VXLAN interface is no longer required for each VNI. Sample configuration of SVD with VLAN to VNI mappings is shown below. set interfaces bridge br0 member interface vxlan0 set interfaces vxlan vxlan0 external set interfaces vxlan vxlan0 source-interface 'dum0' set interfaces vxlan vxlan0 vlan-to-vni 10 vni '10010' set interfaces vxlan vxlan0 vlan-to-vni 11 vni '10011' set interfaces vxlan vxlan0 vlan-to-vni 30 vni '10030' set interfaces vxlan vxlan0 vlan-to-vni 31 vni '10031'
2023-09-08Merge pull request #2222 from nicolas-fort/T4072-fwall-bridgeChristian Breunig
T4072: add firewall bridge filtering.
2023-09-08T5518: Add basic MLD supportYuxiang Zhu
Currently VyOS has `protocol igmp` option to enable IGMP querier and reports through FRR's pimd. I would like to add support for IPv6 as well since FRR's IPv6 multicast functionality has significantly improved. Enabling both MLD and IGMP on a VyOS router will allow us to turn on multicast snooping on layer-3 switches in dual-stack networks. Example commands: ``` // Enable on interface eth0 set protocols pim6 interface eth0 // Explicitly join multicast group ff18::1234 on interface eth1 set protocols pim6 interface eth1 mld join ff18::1234 // Explicitly join source-specific multicast group ff38::5678 with source address 2001:db8::1 on interface eth1 set protocols pim6 interface eth1 mld join ff38::5678 source 2001:db8::1 ```
2023-09-07T4072: add firewall bridge filtering. First implementation only applies for ↵Nicolas Fort
forward chain and few matchers. Should be extended in the future.
2023-09-06Merge pull request #2199 from sarthurdev/T4309Christian Breunig
conntrack: T4309: T4903: Refactor `system conntrack ignore`, add IPv6 support and firewall groups
2023-09-06Merge pull request #2208 from sarthurdev/T5550Christian Breunig
interface: T5550: Interface source-validation priority over global value
2023-09-05Merge pull request #2204 from sever-sever/T5480John Estabrook
T5480: Ability to disable SNMP for keepalived service VRRP
2023-09-05firewall: T3509: Split IPv4 and IPv6 reverse path filtering like on interfacessarthurdev