Age | Commit message (Collapse) | Author |
|
Linux bridge uses EtherType 0x8100 by default. In some scenarios, an EtherType
value of 0x88A8 is required.
Reusing CLI command from VIF-S (QinQ) interfaces:
set interfaces bridge br0 protocol 802.1ad
(cherry picked from commit 9c9b1febff6863ccd3632a04d9e307909b3efe7a)
|
|
The maximum timeout for the `service config-sync` is 300 seconds
(Connection API timeout). It could not be enough for the real massive
configurations.
Increase the maximum value to 3600
```
set service config-sync secondary address 192.0.2.1
set service config-sync secondary timeout 3600
```
(cherry picked from commit 4a90e00a886397d9f4202b78cc8995ed93d40014)
|
|
add mtu to default and specified class
update smoke test
(cherry picked from commit 84bbcdf5b7980f701aba6e158a2be4a05e7076d9)
|
|
Extend `service config-sync` with new sections:
- LeafNodes: pki, policy, vpn, vrf (syncs the whole sections)
- Nodes: interfaces, protocols, service (syncs subsections)
In this cae the Node allows to uses the next level section
i.e subsection
For example any of the subsection of the node `interfaces`:
- set service config-sync section interfaces pseudo-ethernet
- set service config-sync section interfaces virtual-ethernet
Example of the config:
```
set service config-sync mode 'load'
set service config-sync secondary address '192.0.2.1'
set service config-sync secondary key 'xxx'
set service config-sync section firewall
set service config-sync section interfaces pseudo-ethernet
set service config-sync section interfaces virtual-ethernet
set service config-sync section nat
set service config-sync section nat66
set service config-sync section protocols static
set service config-sync section pki
set service config-sync section vrf
```
(cherry picked from commit 25b611f504521181f85cb4460bfdfd702c377b5e)
|
|
Remove all AS numbers from the AS_PATH of the BGP path's NLRI.
set policy route-map <name> rule <rule> set as-path exclude all
(cherry picked from commit 16395c902ff79fcb34019a6d499467488ed45849)
|
|
xml: T2518: T160: improve NAT66/NPTv6 and NAT64 help string s (backport #3135)
|
|
(cherry picked from commit 7ca0ad91744044f74690179eaec4160d9c4fee65)
|
|
(cherry picked from commit 63de63f43aaa720993faf06ba2789789d87d63c6)
|
|
(cherry picked from commit d6226d60dce4a46c9fa63adbf85f2df86c7bd1b1)
|
|
radvd: T6118: add nat64prefix support RFC8781 (backport #3125)
|
|
Add support for pref64 option, as defined in RFC8781. The prefix valid lifetime
must not be smaller than the "interface interval max" definition which defaults
to 600.
set service router-advert interface eth1 nat64prefix 64:ff9b::/96
(cherry picked from commit f1ead5c6a16aba00699b8a5b9c18ef6cffe8cc4d)
|
|
Lower available CPU C states to a minimum if this option set. This will set
Kernel commandline options "intel_idle.max_cstate=0 processor.max_cstate=1".
(cherry picked from commit 3a3e0dff4ff1f80835eca6b2362d792e3ecacc8e)
|
|
Added health-check to sync-group in CLI
Don't use instance health-check when instance in sync group member
Disallow wrong healtch-check configurations
New smoke test
|
|
dhcp-client: T6093: extend regex for client class-id's with DOT (backport #3117)
|
|
A restriction to ascii in the constraint disallowed earlier support for
unicode bytes.
(cherry picked from commit 66b92e1cd4ec948c1e2df4bee9b21da9633f5bd8)
|
|
The regex used is not working if the string contains dots.
Originally authored by: Lucas <pinheirolucas@pm.me>
(cherry picked from commit c8670ae7941a8bac31e2174d4c6426b47272bfcc)
|
|
be allowed
This reverts a change from commit a72ededa0 ("xml: T5738: lower maximum
description to 255 characters") which incresaed the lower limit from 0 to 1.
We actually require 0 length value for description nodes as introduced in
commit 6eea12512e ("xml: T1579: allow zero length for description").
(cherry picked from commit 724c685cba423758bece827d6d286815933ba912)
|
|
e.g. Linux Kernel only supports 255 and not 256 characters for the ifalias field.
(cherry picked from commit a72ededa0b29c25efaab52f2db170c34eba50248)
|
|
(cherry picked from commit 4792d39bb84991768404f69ff807e43a9979a79e)
|
|
(cherry picked from commit 77a25e95da48549f2791b677f4ba187e547b1c6a)
|
|
(cherry picked from commit c37fb4010c50a18029d6c680c42fceb3b8930dbd)
|
|
All valid country codes can be retrieved from [1] and extracted which resulted
in the completion helper list of this commit.
1: https://git.kernel.org/pub/scm/linux/kernel/git/wens/wireless-regdb.git/tree/db.txt
(cherry picked from commit 45cd735f89a4b6c7419a26d2800d832c9da9f735)
|
|
Make the code more uniform and maintainable.
(cherry picked from commit 21b0bf0168697fdbe514ae49a4a28b39a91ec777)
|
|
(cherry picked from commit 6a97fdfa1ba9b4135a51498ea5acabb804256b2c)
|
|
dhcp-server: T6079: Disable duplicate static-mappings on migration
|
|
Example:
vyos@vyos# set protocols ospfv3 redistribute bgp
Possible completions:
metric OSPF default metric
metric-type OSPF metric type for default routes (default: 2)
route-map Specify route-map name to use
(cherry picked from commit ed2c288c8a9031f91acf76d20b84e2002696981c)
|
|
(cherry picked from commit 3480d92a8c4d84e8c1f94a9362bac2be0cc77921)
|
|
|
|
(cherry picked from commit e2adfdef9e79aa7550e82a12d661718a479aba90)
|
|
|
|
Removed word 'PPPoE' from descriptions in common template for all
accel-ppp services.
(cherry picked from commit 8e1793834bf453ff252f38ae5271f7f9bcea9bf9)
|
|
* set system login user <name> disable
(cherry picked from commit 6e0b146ed3b90da577c3ecba38836883fd435e7a)
|
|
context
* set vrf name <name> ip nht no-resolve-via-default
* set vrf name <name> ipv6 nht no-resolve-via-default
(cherry picked from commit 0fafc4bcdb9efc03796ddab0832471b11ba1bbe0)
|
|
* set system ip nht no-resolve-via-default
* set system ipv6 nht no-resolve-via-default
(cherry picked from commit ece0e768f36e52f8964823d891264d7c187204ec)
|
|
Removed dhcp-interface option (l2tp)
Added wins-server (sstp)
Added description (ipoe, pppoe, sstp, pptp)
Added exteded-script (l2tp, sstp, pptp)
Added shaper (ipoe, pptp, sstp, l2tp)
Added limits (ipoe, pptp, sstp, l2tp)
Added snmp ( ipoe, pptp,sstp, l2tp)
Refactoring and reformated code.
(cherry picked from commit ac6a16f6c5ad7700789759e1ec093236c2e182a2)
|
|
(cherry picked from commit ac2d7dfac6073d0f232191ec494f78a8d12889e4)
|
|
set pki openssh rpki private key ...
set pki openssh rpki public key ...
set pki openssh rpki public type 'ssh-rsa'
(cherry picked from commit 8c78ef0879f22ffd4a5f7fdb175e9109b46e9d7b)
|
|
T5064: Firewall fix RegEx for for domain-group (backport #3000)
|
|
Improve RegEx for firewall domain-groups.
This domain group looks good, but the current RegEx validation
fils:
```
set firewall group domain-group a_aa
```
(cherry picked from commit b67049edab41e8714aec087b81d589fdb03a350b)
|
|
Change the firewall priority to 319, after interface ethernet
configuration
For example if we use VLANs and the vlan interface must be
created before we can use it in the firewall/flowtable
The current priority
```
199 firewall
300 interfaces/dummy
300 interfaces/loopback
300 interfaces/virtual-ethernet
310 interfaces/bridge
310 interfaces/input
318 interfaces/ethernet
...
```
(cherry picked from commit f1dcd2d23f89251b0a96c61f8186002cb0d50d18)
|
|
In some EVPN deployments it is useful to associate a logical VTEP's Layer 2
domain (MAC-VRF) with a Site-of-Origin "site" identifier. This provides a BGP
topology-independent means of marking and import-filtering EVPN routes
originated from a particular L2 domain. One situation where this is valuable
is when deploying EVPN using anycast VTEPs
set protocols bgp address-family l2vpn-evpn mac-vrf soo
(cherry picked from commit f308df322bd62024e29dd458642cb6bcac8a5ad6)
|
|
srv6: T5849: add segment support to "protocols static route6" (backport #2980)
|
|
* set protocols static route6 <prefix> next-hop <address> segments 'x:x::x:x/y:y::y/z::z'
* set protocols static route6 <prefix> interface <interface> segments 'x:x::x:x/y:y::y/z::z'
(cherry picked from commit b84f7de453f3951945298d95a8a27345ba7d28c3)
|
|
(cherry picked from commit a22e0ee09ff4750de004090f1f55ee75a12dc821)
|
|
rpki: T6004: add missing startup priority (backport #2983)
|
|
(cherry picked from commit 4c2acb970c62478cf1139fcf66b0de341d46f7fc)
|
|
(cherry picked from commit d4278cde2b153e163fe41e1bc461891397336bc3)
|
|
Rewritten authentication node in accel-ppp services
to a single view. In particular - PPTP authentication.
(cherry picked from commit 018110200c9a82815dd5d0510f0732d7159c0d59)
|
|
(cherry picked from commit 17894f6f5d97df7d3ac1cf37ce0e1a96b8fa8e8b)
|
|
(cherry picked from commit 1cb52f758cec78b9ac19f47448064b8e9e722b67)
|