summaryrefslogtreecommitdiff
path: root/interface-definitions
AgeCommit message (Collapse)Author
2019-08-07XML: WireGuard: run interfacedefinition through XML lintChristian Poessinger
2019-08-07Validator: rename cidr -> ip-cidr to match existing patternsChristian Poessinger
2019-08-05[bridge] T1156: add XML completion helpers for interface address (dhcp and ↵Christian Poessinger
dhcpv6)
2019-08-05[bridge] T1156: add XML address constraintsChristian Poessinger
2019-08-05[bridge] T1156: remove priority of address nodeChristian Poessinger
2019-08-04[bridge] T1156: rename igmp-snooping node to igmpChristian Poessinger
2019-08-03[bridge] T1156: support adding and removing bridge member interfacesChristian Poessinger
This is the new syntax bridge br0 { member { interface eth0 { cost 10 } interface eth1 { cost 11 } } }
2019-08-02[bridge] T1156: first working implementation using Python and XMLChristian Poessinger
2019-08-02WireGuard: rename wireguard.py -> interface-wireguard.pyChristian Poessinger
2019-08-02WireGuard: rename wireguard.xml -> interfaces-wireguard.xmlChristian Poessinger
2019-07-31T1555 Implementation shared-secret for LNS. Implementation command disabling ↵DmitriyEshenko
ccp.
2019-07-30Merge pull request #94 from hagbard-01/sstphagbard-01
[SSTP] - T853: accel-ppp: SSTP implementation
2019-07-30[SSTP] - T853: accel-ppp: SSTP implementationhagbard
2019-07-26T1546 fix syntax l2tp radius source-address and migrate other radius optionsDmitriyEshenko
2019-07-25[accel-l2tp] - T834: l2tp implementationhagbard
- node.def deletion for show remote-access - IPSec interface checking for L2TP - IPSec x509 for l2tp - verification of outside-address to warning since it was optional in the previous config
2019-07-22[wireguard] fixing value help typohagbard
2019-07-22[pppoe] typo fixedhagbard
2019-07-21T1537: add missing help for 'set service dns'Christian Poessinger
2019-07-15[T1299] - SNMP extension with custom scriptshagbard
2019-07-08[IPoE] - T1510: vlan-mon option implementationhagbard
2019-07-08[PPPoE] - T1489: vlan_mon config optionshagbard
2019-07-04T1435 plus other dhcp/dhcpv6-server enhancementsJernej Jakob
- T1435: dhcp-server: make ip-address optional in static-mapping - remove [REQUIRED] from dhcpv6-server static-mapping identifier and ipv6-address - verify if static-mapping ipv6-address is in subnet - make help and error messages in conf-mode more descriptive - remove regex ^$ anchors (implied in re.fullmatch)
2019-07-02[IPoE] T1495 - IA-PD via IPoE implementedhagbard
2019-07-01[service https] T1443: add service https and service https apiJohn Estabrook
2019-07-01T1498: Nameservers are not propagated into resolv.confKim Hagen
2019-06-28[IPoE] config structure improvedhagbard
* fixed minor issues * fixed lower function for mac addresses if user capitalized it (local mode only) * added some checks to verify() * cli ip-address checks on input
2019-06-27[IPoE] T989 - IPoE implementationhagbard
* chap-secrets file generation * noauth in accel config as option * local auth with csid implemented * radius implementation * shaper per user implemented * op comands for stats
2019-06-22bfd: T1183: move "multiplier" configuration node to "interval multiplier"Christian Poessinger
2019-06-22bfd: T1183: add rx/tx interval configurationChristian Poessinger
vyos@vyos# show protocols bfd { peer 1.1.1.1 { interval { receive 400 transmit 300 } } }
2019-06-22bfd: T1183: add support to configure detection multiplierChristian Poessinger
Configures the detection multiplier to determine packet loss. The remote transmission interval will be multiplied by this value to determine the connection loss detection timer. The default value is 3. Example: when the local system has detect-multiplier 3 and the remote system has transmission interval 300, the local system will detect failures only after 900 milliseconds without receiving packets.
2019-06-22bfd: T1183: adjust CLI syntax for source address/interfaceChristian Poessinger
Place address/interface under new source node. vyis@vyos# show protocols bfd peer 1.1.1.1 { source { address 1.2.3.4 interface eth0.201 } }
2019-06-22bfd: T1183: add support for multihopChristian Poessinger
multihop tells the BFD daemon that we should expect packets with TTL less than 254 (because it will take more than one hop) and to listen on the multihop port (4784). When using multi-hop mode echo-mode will not work (see RFC 5883 section 3).
2019-06-22bfd: T1183: initial CLI implementationChristian Poessinger
vyos@vyos# show protocols bfd peer 172.18.202.10 { local-address 172.18.201.10 local-interface eth0.201 shutdown } peer 172.18.202.12 { shutdown }
2019-06-19[wireguard] T1425 - assign a /31 address on Wireguard interfacehagbard
- added a validator for checking if the address is any cidr noted address
2019-06-18[pppoe-server] T1452 - add vendor option to shaperhagbard
2019-06-16T1439: remove beginning and end anchors, they are implied with re.fullmatchJernej Jakob
2019-06-16T1439: move DUID validator to regexJernej Jakob
2019-06-16T1439: add dhcpv6-client-id validatorJernej Jakob
2019-06-16dhcpv6-server: Add name constraint, clarify help, fix typosJernej Jakob
2019-04-26[pppoe-server] adding CIDR based prefixes as client-ip-pool optionhagbard
2019-04-23[pppoe-server] - fixed default RADIUS attribute Filter-Idhagbard
2019-04-21[firewall] T314: add firewall options for MSS clampingChristian Poessinger
* clamp MSS IPv4 set firewall options interface pppoe0 adjust-mss '1452' * clamp MSS IPv6 set firewall options interface pppoe0 adjust-mss6 '1452' * disable entire rule set firewall options interface pppoe0 disable Output ------ $ sudo iptables-save -t mangle # Generated by iptables-save v1.4.21 on Sun Apr 21 12:56:25 2019 *mangle :PREROUTING ACCEPT [1217:439885] :INPUT ACCEPT [290:52459] :FORWARD ACCEPT [920:375774] :OUTPUT ACCEPT [301:100053] :POSTROUTING ACCEPT [1221:475827] :VYOS_FW_OPTIONS - [0:0] -A FORWARD -j VYOS_FW_OPTIONS -A VYOS_FW_OPTIONS -o pppoe0 -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --set-mss 1452 COMMIT Completed on Sun Apr 21 12:56:25 2019 (cherry picked from commit 476aa4c3a561ea0ef0bf9b4c26ec8b78d18a5d02)
2019-04-20Revert "[hostname] T1336: trailing dots in system domain-name are invalid"Christian Poessinger
This reverts commit 05c539ea5595790b297904569cbe13089ce79e18.
2019-04-20[hostname] T1336: trailing dots in system domain-name are invalidChristian Poessinger
Debian/Systemd provides hostnamectl which disabllows setting a FQDN when there is a trailing (.) in the provided hostname. Extend regex when setting "system domain-name" that there can't be a trailing (.). Provide migration script for current installations to remove the dot.
2019-04-18[pppoe-server] - typo correctedhagbard
2019-04-18[pppoe-server] T1341 - Adding rate-limiter for pppoe server usershagbard
- RADIUS shaper settings
2019-04-18[pppoe-server] T1341 - Adding rate-limiter for pppoe server usershagbard
- implementation for locally definied users
2019-04-03[dhcpv6-relay] T1322: support multiple upstream serversChristian Poessinger
Add support for relaying a DHCPv6 packet to multiple servers on one upstream interface.
2019-03-11[arp] - T1288: python implemtation of 'set protocols static arp'hagbard
2019-03-08T103: [dhcp-server] add support to configure host declarative namesChristian Poessinger
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-23 17:26:32 +0000