| Age | Commit message (Collapse) | Author |
|---|
|
T5688: Changed 'range' to multi in 'client-ip-pool' for accell-ppp (backport #2777)
|
|
interface: T5550: Interface source-validation priority over global value (backport)
|
|
Changed node 'range' to multi in 'client-ip-pool' for accell-ppp
services.
Added completionHelp to default-pool and next-pool.
Fixed verification in vpn l2tp config script.
(cherry picked from commit 4ffec67d04670192d9b722353cbaef04cb0ba129)
|
|
(cherry picked from commit f1411240c6b11ec400ac0f66eb71982259204317)
|
|
T5530: isis: Adding loop free alternate feature (backport #2263)
|
|
(cherry picked from commit 7a2b70bd73c8579a885348b93b8addfb20fb006c)
|
|
We have not seen the adoption of the https virtual-host CLI option.
What it did?
* Create multiple webservers each listening on a different IP/port
(but in the same VRF)
* All webservers shared one common document root
* All webservers shared the same SSL certificates
* All webservers could have had individual allow-client configurations
* API could be enabled for a particular virtual-host but was always enabled on
the default host
This configuration tried to provide a full webserver via the CLI but VyOS is a
router and the Webserver is there for an API or to serve files for a local-ui.
Changes
Remove support for virtual-hosts as it's an incomplete and thus mostly useless
"thing". Migrate all allow-client statements to one top-level allow statement.
(cherry picked from commit d0d3071e99eb65edb888c26ef2fdc9e038438887)
|
|
(cherry picked from commit 9ab6665c80c30bf446d94620fc9d85b052d48072)
|
|
The "idea" of this PR is to add new CLI nodes under the pki subsystem to
activate ACME for any given certificate.
vyos@vyos# set pki certificate NAME acme
Possible completions:
+ domain-name Domain Name
email Email address to associate with certificate
listen-address Local IPv4 addresses to listen on
rsa-key-size Size of the RSA key (default: 2048)
url Remote URL (default:
https://acme-v02.api.letsencrypt.org/directory)
Users choose if the CLI based custom certificates are used
set pki certificate EXAMPLE acme certificate <base64>
or if it should be generated via ACME.
The ACME server URL defaults to LetsEncrypt but can be changed to their staging
API for testing to not get blacklisted.
set pki certificate EXAMPLE acme url https://acme-staging-v02.api.letsencrypt.org/directory
Certificate retrieval has a certbot --dry-run stage in verify() to see if it
can be generated.
After successful generation, the certificate is stored in under
/config/auth/letsencrypt. Once a certificate is referenced in the CLI (e.g. set
interfaces ethernet eth0 eapol certificate EXAMPLE) we call
vyos.config.get_config_dict() which will (if with_pki=True is set) blend in the
base64 encoded certificate into the JSON data structure normally used when
using a certificate set by the CLI.
Using this "design" does not need any change to any other code referencing the
PKI system, as the base64 encoded certificate is already there.
certbot renewal will call the PKI python script to trigger dependency updates.
(cherry picked from commit b8db1a9d7baf91b70c1b735e58710f1e2bc9fc7a)
# Conflicts:
# debian/control
|
|
|
|
features
(cherry picked from commit 199ceb1f0a820c838dea6862371a3121b3d9f3a9)
|
|
underscore and dot
(cherry picked from commit 82b4b2db8fda51df172210f470e5825b91e81de4)
|
|
Backports for Accel-PPP based serviced T5801, T5842 and T5688
|
|
T5880: verify_source_interface() should not allow dynamic interfaces like ppp, l2tp, ipoe or sstpc client interfaces (backport #2728)
|
|
Files got added by accident in commit c9eaafd9f ("T5474: establish common file
name pattern for XML conf mode commands")
|
|
(cherry picked from commit 679be4c9742ffd5c317742c6c20a268a5e044f0c)
|
|
(cherry picked from commit a232b83601f4f8b2fe6964239a568acad3fa764a)
|
|
Rewritten PPTP to get_config_dict
Fixed 'dynamic-author' commands. These commands did not create
anything in accel-ppp config.
(cherry picked from commit f39eb894d991d296a82c69d1ab783011b5d0ed2f)
|
|
Rewritten L2TP to get_config_dict
Rewritten L2TP xml to accel-ppp patterns
Migrated 'idle' to 'ppp-options.lcp-echo-timeout'
Migrated 'authentication.mppe' to 'ppp-options.mppe'
Migrated 'authentication.radius.dae-server' to
'authentication.radius.dynamic-author'
Migrated 'authentication.require' to 'authentication.protocol'
Added 'authentication.radius.acct-interim-jitter'
Added 'authentication.radius.preallocate-vif'
Added 'authentication.radius.server.<IP>.acct-port'
Added 'ppp-options.ipv4'
Added smoke-tests
Fixed 'preallocate-vif' in SSTP
(cherry picked from commit 09e0a2ca035ee39a68a510b28cc74560669d0420)
|
|
interfaces
Interfaces matching the following regex (ppp|pppoe|sstpc|l2tp|ipoe)[0-9]+ can
not be used as source-interface for e.g. a tunnel.
The main reason is that these are dynamic interfaces which come and go from a
kernel point of view, thus it's not possible to bind an interface to them.
(cherry picked from commit 5062f5d313548d6ebb9c07fee6b6d6be25b8f8f0)
|
|
We will use _ as CLI level divider. The XML definition filename and also
the Python helper should match the CLI node.
Example:
set interfaces ethernet -> interfaces_ethernet.xml.in
set interfaces bond -> interfaces_bond.xml.in
set service dhcp-server -> service_dhcp-server-xml.in
(cherry picked from commit 4ef110fd2c501b718344c72d495ad7e16d2bd465)
|
|
firewall: T5834: Rename 'enable-default-log' to 'default-log' (backport #2651)
|
|
(cherry picked from commit 656934e85cee799dba5b495d143f6be445ac22d5)
|
|
`include/firewall/rule-log-options.xml.i` is now more aptly renamed to
`include/firewall/log-options.xml.i`.
(cherry picked from commit 53a48f499ae9bcc2f657136bb7779b38aad1c242)
|
|
This file is a left over from previous refactoring and no longer
referenced anywhere in the interface definitions.
(cherry picked from commit f8f382b2195da8db8b730f107ffba16e67dac822)
|
|
(cherry picked from commit 7c40b70af9def9242b30d1fc949288d9da2bd027)
|
|
Rename chain level defaults log option from `enable-default-log` to
`default-log` for consistency.
(cherry picked from commit 245e758aa2ea8779186d0c92d79d33170d036992)
|
|
Shorten and simplify `system domain-search` config path from:
```
set system domain-search domain <domain1>
```
to:
```
set system domain-search <domain1>
```
This will shorten the path and also make consistent with `domain-search`
config in other places (like `dhcp-server`).
(cherry picked from commit f77bf573c608b6c09182e1bad4312c4dd1e5195e)
|
|
Running ddclient on a VLAN interface will fail during reboot as there is no
discrete priority to tell that the dynamic DNS service needs to be started
after the interfaces.
(cherry picked from commit ef237a7555843226e9bf48e552ed5feb5df581f4)
|
|
Standardized pool configuration for all accel-ppp services.
1. Only named pools are used now.
2. Allows all services to use range in x.x.x.x/mask
and x.x.x.x-x.x.x.y format
3. next-pool can be used in all services
2. Allows to use in ipoe gw-ip-address without pool configuration
which allows to use Fraimed-IP-Address attribute by radius.
3. Default pool name should be explicidly configured
with default-pool.
4. In ipoe netmask and range subnet can be different.
(cherry picked from commit 422eb463d413da812eabc28706e507a9910d7b53)
|
|
Enforce constraint on Dynamic DNS service name to be alphanumeric
(including hyphens and underscores).
|
|
(cherry picked from commit a9201e77110ce0695e2ba879304aef41b7ac9a0c)
|
|
Match mark allows to use firewall marks of packet to use
a specific pool
Example of instance config /run/jool/instance-100.json
```
...
"pool4": [
{
"protocol": "TCP",
"prefix": "192.0.2.10",
"port range": "1-65535",
"mark": 23
},
...
```
(cherry picked from commit 8e1e79cfa24c155c8d504822fbbd3c20f890fb70)
|
|
(cherry picked from commit 89cd75b8dbe5cc145a4423bf10faa76fd6bdcdbf)
|
|
T2898: add ndp-proxy service (backport #2665)
|
|
VyOS CLI command
set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static'
Will generate the following NDP proxy configuration
$ cat /run/ndppd/ndppd.conf
# autogenerated by service_ndp-proxy.py
# This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route
route-ttl 30000
# This sets up a listener, that will listen for any Neighbor Solicitation
# messages, and respond to them according to a set of rules
proxy eth0 {
# Turn on or off the router flag for Neighbor Advertisements
router no
# Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds)
timeout 500
# Control how long a valid or invalid entry remains in the cache (milliseconds)
ttl 30000
# This is a rule that the target address is to match against. If no netmask
# is provided, /128 is assumed. You may have several rule sections, and the
# addresses may or may not overlap.
rule 2001:db8::/64 {
static
}
}
(cherry picked from commit 4d721a58020971d00ab854c37b68e88359999f9c)
|
|
The Linux Kernel needs to be told if IPv6 SR enabled packets whether should be
processed or not. This is done using
/proc/sys/net/conf/<iface>/seg6_* variables:
seg6_enabled - BOOL
Accept or drop SR-enabled IPv6 packets on this interface.
Relevant packets are those with SRH present and DA = local.
0 - disabled (default)
not 0 - enabled
Or the VyOS CLI command:
* set protocols segment-routing interface eth0 srv6
(cherry picked from commit 774cc97eda61eb0b91df820797fb3c705d0073d5)
|
|
The DUID regex was missing a lower bound, which could cause it not to
match when it should.
We have to specify the lower bound explicitly as 0 to keep the regex
behavior similar to that in Python (in Python, omitting the lower bound
is equivalent to specifying 0).
(cherry picked from commit 551f06218755076cde588c848c01ce5ca1bf5e6b)
|
|
(cherry picked from commit 5768bc2d56cc8aabd8d276a2afc30608c1bc9838)
|
|
Refactor DUID XML definition in conf-mode to be reusable. Additionally, remove
explicit call to a separate validator `ipv6-duid` and inline the regex into the
XML definition.
(cherry picked from commit 51e7832fc5c88f9956b26157a80947bad4495a4e)
|
|
Add ability to configure multiple SSL certificates for
frontend/service
set load-balancing reverse-proxy service web mode http
set load-balancing reverse-proxy service web port 443
set load-balancing reverse-proxy service web ssl certificate cert1
set load-balancing reverse-proxy service web ssl certificate cert2
(cherry picked from commit fe99c45e05fd5794905145ddca80e6078145c2e8)
|
|
Add BMP feature.
BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring
data from BGP routers to network management entities
https://docs.frrouting.org/en/latest/bmp.html
Example:
set system frr bmp
commit
run restart bgp
set protocols bgp system-as '65001'
set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast
set protocols bgp neighbor 192.0.2.11 remote-as '65001'
set protocols bgp bmp mirror-buffer-limit '256000000'
set protocols bgp bmp target foo address '127.0.0.1'
set protocols bgp bmp target foo port '5000'
set protocols bgp bmp target foo min-retry '1000'
set protocols bgp bmp target foo max-retry '2000'
set protocols bgp bmp target foo mirror
set protocols bgp bmp target foo monitor ipv4-unicast post-policy
set protocols bgp bmp target foo monitor ipv4-unicast pre-policy
set protocols bgp bmp target foo monitor ipv6-unicast post-policy
set protocols bgp bmp target foo monitor ipv6-unicast pre-policy
(cherry picked from commit 5523fccf4f7d05444c36c568128e94cd7b08c34f)
|
|
OCserv manual recommended HTTP headers tobe included in the configuration.
(cherry picked from commit ad65d37ddf92ec8416c84707d7d41e63346b550c)
(cherry picked from commit 24f449cc099703df95646c719e9d3f308ed1a3f0)
|
|
included in <set firewall global-options state-policy> node.
|
|
|
|
This allows the operator to control the number of open file descriptors each
daemon is allowed to start with. The current assumed value on most operating
systems is 1024.
If the operator plans to run bgp with several thousands of peers then this is
where we would modify FRR to allow this to happen.
set system frr descriptors <n>
(cherry picked from commit 892c28ccf634173d4c4952c248cb03974c560793)
|
|
VyOS CLI
set protocols segment-routing srv6 locator bar prefix '2001:b::/64'
set protocols segment-routing srv6 locator foo behavior-usid
set protocols segment-routing srv6 locator foo prefix '2001:a::/64'
Will generate in FRR
segment-routing
srv6
locators
locator bar
prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16
exit
!
locator foo
prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16
behavior usid
exit
!
exit
!
exit
!
exit
(cherry picked from commit ca301cdd4746187f96ff84e411fda6a84e33f237)
|
|
set protocols bgp sid vpn per-vrf export '99'
set protocols bgp srv6 locator 'foo'
set protocols bgp system-as '100'
Will generate in FRR config
router bgp 100
no bgp ebgp-requires-policy
no bgp default ipv4-unicast
no bgp network import-check
!
segment-routing srv6
locator foo
exit
sid vpn per-vrf export 99
exit
(cherry picked from commit af46fe54e56cf85d13b62ee771bec3d80f225ac5)
|
|
Apply baseline defaults for `.gitattributes` and `.vscode/settings.json`
for improved developer experience.
The `.gitattrbutes` settings are based on:
Git documentation (https://git-scm.com/docs/gitattributes#_effects)
GitHub documentation (https://docs.github.com/en/get-started/getting-started-with-git/configuring-git-to-handle-line-endings)
Community templates (https://github.com/gitattributes/gitattributes)
Since editor-agnostic line-ending specific settings are applied to
`.gitattributes`, they can be removed from `.vscode/settings.json`.
The global VSCode defaults have also been removed to avoid duplication.
(cherry picked from commit c30002208d392177cb1ffc1a5c714f7ad6d573b6)
|
|
T160: add NAT64 (backport #2578)
|
