| Age | Commit message (Collapse) | Author |
|---|
|
T4832: dhcp: Add IPv6-only dhcp option support (RFC 8925)
|
|
T4780: Firewall: add firewall groups in firewall. Extend matching cri…
|
|
firewall: T4882: add missing ICMPv6 type names
|
|
T4809: radvd: Allow the use of AdvRASrcAddress
|
|
routing: T1237: Add new feature failover route
|
|
This add the AdvRASrcAddress configuration option to configure
a source address for the router advertisements. The source
address still must be configured on the system. This is useful
for VRRP setups where you want fe80::1 on the VRRP interface
for cleaner VRRP failovers.
|
|
|
|
Failover route allows to install static routes to the kernel routing
table only if required target or gateway is alive
When target or gateway doesn't respond for ICMP/ARP checks this route
deleted from the routing table
Routes are marked as protocol 'failover' (rt_protos)
cat /etc/iproute2/rt_protos.d/failover.conf
111 failover
ip route add 203.0.113.1 metric 2 via 192.0.2.1 dev eth0 proto failover
$ sudo ip route show proto failover
203.0.113.1 via 192.0.2.1 dev eth0 metric 1
So we can safely flush such routes
|
|
validators: T4798: replace python file-exists validator with file-path
|
|
|
|
|
|
vyos@vyos# show interfaces sstpc
sstpc sstpc10 {
authentication {
password vyos
user vyos
}
server sstp.vyos.net
ssl {
ca-certificate VyOS-CA
}
}
|
|
|
|
|
|
Fix l2tp dae server template and python config dict for correctlly
handling Dynamic Authorization Extension server configuration
|
|
|
|
|
|
|
|
|
|
firewall: T4612: Support arbitrary netmasks
|
|
|
|
* 'T4825' of https://github.com/sever-sever/vyos-1x:
T4825: Add basic smoketest for veth interfaces
T4825: Add interface type veth
|
|
Add interface type veth (Virtual ethernet)
One of the usecases it's interconnect different vrf's and
default vrf via bridge
set interfaces virtual-ethernet veth0 peer-name 'veth1010'
set interfaces virtual-ethernet veth1010 address '10.0.0.10/24'
set interfaces virtual-ethernet veth1010 peer-name 'veth0'
set interfaces virtual-ethernet veth1010 vrf 'foo'
set interfaces bridge br0 address '10.0.0.1/24'
set interfaces bridge br0 member interface veth0
|
|
including "cni-" prefix)
* Error: unable to start container "<id>": plugin type="bridge" failed (add): cni plugin bridge failed: failed to create bridge "cni-thisismorethan15chars": could not add "cni-thisismorethan15chars": numerical result out of range
|
|
Clients supporting this DHCP option (DHCP option 108, RFC 8925) will
disable its IPv4 network stack for configured number of seconds
and operate in IPv6-only mode.
This option is known to work on iOS 15+ and macOS 12.0.1+.
Example command:
```sh
set service dhcp-server shared-network-name LAN6 subnet 192.168.64.0/24 ipv6-only-preferred 0
```
|
|
so this new group can be used in inbound and outbound matcher
|
|
Requires full key type name like sk-ecdsa-sha2-nistp256@openssh.com
and sk-ssh-ed25519@openssh.com
|
|
policy: T2199: T4605: Migrate policy route interface node
|
|
|
|
|
|
<name> interface <ifname>`
* Include refactor to policy route to allow for deletion of mangle table instead of complex cleanup
* T4605: Rename mangle table to vyos_mangle
|
|
|
|
Size of /dev/shm within a container can be defined via --shm-size when invoking
the container. Add corresponding CLI node.
|
|
firewall: T970: T1877: Add source/destination fqdn, refactor domain resolver, firewall groups in NAT
|
|
|
|
`fqdn` node
|
|
Instead of spawning the Python interpreter for every mac-address to
validate, rather use the base validate-value OCaml implementation which
is much faster.
This removes redundant code and also makes the CLI more responsive.
Validator is moved out to a dedicated file instead of using XML inlined <regex>
for the reason of re-usability. So if that regex needs to be touched again - it
can all happen in one single file.
|
|
Reduce CPU time when spawning the python interpreter. Same can be done by the
numeric validator.
|
|
Remove duplicated code and move to single-source of truth.
|
|
|
|
This enabled users to also use 2FA/MFA authentication with a radius backend as
there is enough time to enter the second factor.
|
|
|
|
|
|
|
|
|
|
|
|
Ability to configure SSH-server HostKeyAlgorithms.
Specifies the host key signature algorithms that the server
offers. Can accept multiple values.
|
|
Move default values of TOTP configuration from a global to a per user setting.
This makes the entire code easier as no global configuration must be blended
into the per user config dict.
Also it should be possible to set the authentication window "multiple concurrent
keys" individual per user.
set system login user vyos authentication otp key 'gzkmajid7na2oltajs4kbuq7lq'
set system login user vyos authentication plaintext-password 'vyos'
|
|
|
|
|
