Age | Commit message (Collapse) | Author |
|
|
|
Since glibc 2.7, the SHA-256 and SHA-512 implementations support
a user-supplied number of hashing rounds, defaulting to 5000. If
the "$id$" characters in the salt are followed by "rounds=xxx$",
where xxx is an integer, then the result has the form
$id$rounds=yyy$salt$encrypted
where yyy is the number of hashing rounds actually used. The
number of rounds actually used is 1000 if xxx is less than 1000,
999999999 if xxx is greater than 999999999, and is equal to xxx
otherwise.
|
|
policy: T5035: Add more actions to policy route rule
|
|
|
|
T5037: Firewall: Add queue action and options to firewall
|
|
Ability setting container hostname
This host name is used as /etc/hostname
set container name <tag> host-name 'mybox'
|
|
|
|
|
|
T4977: Add Babel routing protocol support
|
|
container: T4014: Add `command`, `arg` and `entrypoint` configuration options for containers
|
|
|
|
Tunnel interface multicast settings can be "enabled or disabled". As we prefer
valueless nodes, and the linux kernel default is "disabled" we should add a
set interfaces tunnel tunXX enable-multicast
command
|
|
|
|
Fix timezones completion help and validotor
Use 'timedatectl' insted of find zoneinfo
|
|
|
|
|
|
macsec: T5008: Changed length of CKN to (2..64 hex-digits)
|
|
Disabling authentication is useful in emergency situations
(e.g. RADIUS server is down) or testing purposes.
Clients can connect with any login and username.
set service pppoe-server authentication mode 'noauth'
|
|
Based on wpa_supplicant documentation.
mka_ckn (CKN = CAK Name) takes a 1..32-bytes (8..256 bit)
hex-string (2..64 hex-digits)
Changed allowable length of CKN from strong 64 hex-digits
to the range (2..64 hex-digits)
|
|
set system option keyboard-layout uk
|
|
Not supported with swanctl
|
|
Based on https://docs.strongswan.org/docs/5.9/swanctl/swanctlConf.html
Added default value to dpd_action - clear
Added default value to close_action - none
|
|
|
|
This fixes a regressin introduced in commit e22e9c9210cb5 ("wwan: T3622: add
constraint for username/password CLI nodes").
|
|
T4857: snmp: Fix error when not defining client|network under community
|
|
After the RESTRICTED view was introduced snmpd requires a network to be
specified. Before adding the RESTRICTED view snmpd always assumed the default
network 0.0.0.0/0.
This commit re-adds the build in default networks for IPv4 and IPv6 and
exposes it as a proper default to the CLI so the user is informed about it:
vyos@vyos# set service snmp community foooo
Possible completions:
authorization Authorization type (default: ro)
+ client IP address of SNMP client allowed to contact system
+ network Subnet of SNMP client(s) allowed to contact system (default:
0.0.0.0/0, ::/0)
|
|
sstp-client
|
|
T1993: PPPoE-server add section shaper and fwmark option
|
|
- Username is up to 128 alphanumerical characters, -, _, #, and @
- Password is limited to ASCII characters only, with a total lenght of 128
|
|
containers"
This reverts commit b17251334c57c2f6875c19ad4e6c6127aa9e1811.
|
|
container: T4959: Add container registry authentication config for containers
|
|
T4971: PPPoE server add named ip pool and attr Framed-Pool
|
|
Extended PPPoE-server rate-limiter to avoid shaping marked resources
Often this feature needs for ISP, which provides access to some IX
or its resources.
set service pppoe-server shaper fwmark '223'
|
|
This PR adds basic Babel routing protocol support using the implementation in
FRR.
Signed-off-by: Yuxiang Zhu <vfreex@gmail.com>
|
|
Minimum acceptable MTU. If client will try to negotiate less then
specified MTU then it will be NAKed or disconnected if rejects
greater MTU.
Change 'min-mtu' from 1492 to 1280
|
|
Add a new feature to allow to use named pools
Also it can be used with RADIUS attribute 'Framed-Pool'
set service pppoe-server client-ip-pool name POOL1 gateway-address '192.0.2.1'
set service pppoe-server client-ip-pool name POOL1 subnet '192.0.2.0/24'
|
|
The old interface-name validator was replaced by a faster implementation in
OCaml. Interface validator can be selected by including the appropriate
code snippet.
|
|
|
|
T2408: dhcp-relay: Add listen-interface and upstream-interface feature
|
|
|
|
|
|
|
|
Extend commit 8a75e92d ("T4817 added support for RFC 9234") to also support
peer-groups.
|
|
This improves commit d2885ad0 ("T4969: fix class match mark number").
|
|
T4969: fix class match mark number
|
|
|
|
|
|
options for containers
|
|
|
|
T4916: Rewrite IPsec peer authentication and psk migration
|