summaryrefslogtreecommitdiff
path: root/interface-definitions
AgeCommit message (Collapse)Author
2020-12-07system: T3119: migrate "system ip" to get_config_dict() incl. smoketestChristian Poessinger
2020-12-07Merge pull request #636 from c-po/t2562-dhcpChristian Poessinger
dhcp: T2562: add "listen-address" CLI node for better DHCP relay support
2020-12-06dhcp: T2562: add "listen-address" CLI node for better DHCP relay supportChristian Poessinger
Running ISC DHCP server as backend server for multiple pools served to relay agents requires DHCPd to explicitly listen on give interfaces or a "transit" subnet declaration facing the network where we receive the DHCPREQ messages on. This implements a new "listen-address" CLI node, the given address is validated if it is assigned to the system and upon success, a proper "subnet { }" statement is added into dhcpd.conf
2020-12-06mpls-conf: T915: Add LDP local label allocation control.Cheeze_It
In this commit we added the ability to control the local label allocation control for FECs. It allows for the router to not allocate a label for every interface, just the interfaces that are desired by the operator.
2020-12-04dhcp: T3100: migrate server configuration to get_config_dict()Christian Poessinger
2020-12-04ethernet: T3048: remove "smp-affinity" from CLIChristian Poessinger
Commit 5f5b2808c0a ("ethernet: T3048: drop static smp-affinity for dynamic performance tuning") but the CLI nodes have not been removed.
2020-12-04pppoe: T3112: drop "ipv6 enable" optionChristian Poessinger
IPv6 enable can be considered once the ipv6 node is present!
2020-12-04pppoe: T1579: reorganize "ipv6" CLI node include filesChristian Poessinger
Switch to common source file for "ipv6 address autoconf"
2020-12-04vyos.ifconfig: T1579: migrate "ip source-validation" option from ↵Christian Poessinger
vyatta-cfg-quagga
2020-12-04vlan: xml: T2653: use common include file for ip and ipv6 optionsChristian Poessinger
2020-12-04wwan: T2653: add interface "ip" configuration nodeChristian Poessinger
2020-12-04wireguard: T2653: add interface "ip" configuration nodeChristian Poessinger
2020-12-04Merge pull request #621 from jack9603301/T3089Christian Poessinger
interface: T3089: Migrate port mirroring to vyos-1x
2020-12-03interface: T3089: Migrate port mirroring to vyos-1xjack9603301
2020-12-01vpn: ipsec: T3093: add XML for vpn ipsec conf-modeViacheslav Hletenko
2020-11-30Merge pull request #612 from sever-sever/T1316Daniil Baturin
frr-isis: T1316: Add new routing feature ISIS
2020-11-30frr-is-is: T1316: Add new routing feature IS-ISsever-sever
2020-11-29dhcpv6-relay: T3095: migrate service to get_config_dict()Christian Poessinger
2020-11-29ntp: T2297: support configuration of NTP poolChristian Poessinger
set system ntp server <server> pool
2020-11-29dhcp-relay: T3095: migrate service to get_config_dict()Christian Poessinger
2020-11-28nat: T3092: migrate to get_config_dict()Christian Poessinger
The NAT system consists out of nested tag nodes which makes manual parsing very hard. This is a perfect candidate for migrating this to get_config_dict() as there is already a smoketest in place. In addition this should make it easier to add features like static nat/hairpin.
2020-11-27igmp-proxy: T3088: migrate to get_config_dict()Christian Poessinger
2020-11-22mpls-conf: T915: Refactored FRR LDP template, MPLS handler, added MPLS ↵Cheeze_It
global features So this is a big update. The first thing that was done was a refactor to the FRR LDP template, MPLS handler, and XML conf tree MPLS global additions. The refactors should work and I did test them in my lab. It seems that everything does work as needed so far in my testing. There is something here that is considered configuration breaking from the old setup though. In the old setup the MPLS interface operation (as in the interfaces accepting MPLS labels and processing them) was tied with LDP. What this means is that MPLS processing was enabled at the same time as LDP interfaces were configured. We do not want this behavior for the future as there's other MPLS underlay technologies like SR and RSVP. If someone wants to enable SR or RSVP without enabling LDP then they now can. Before, they couldn't. The other additions are global changes to MPLS TTL propagation and MPLS max TTL enforcement. They have now been added. Lastly, there is an frr-reload bug that Runar Borge found with this. We have found that when totally deleting LDP that there has to be 3 commits done. This is because frr-reload doesn't properly do what it needs to do in 1 operation so we had to do 3. This will only affect people that are doing an entire LDP clear using "delete protocols mpls ldp." Otherwise it isn't seen. Anyway, this refactor now works with the FRR daemon directly for all changes. This also makes it much easier for adding stuff in the future. Thank you
2020-11-21system: T3078: rename "system options" -> "system option"Christian Poessinger
By design a CLI node should not be named by its plural but rather describe it as singular.
2020-11-20Merge pull request #614 from sever-sever/T439Christian Poessinger
policy-conf: T439: Add policy local-route PBR
2020-11-20policy-conf: T439: Add policy local-route PBRsever-sever
2020-11-20wireguard: T3077: automatically create link-local IPv6 adressesChristian Poessinger
link-local addresses can still be disabled using: set interfaces wireguard wg0 ipv6 address no-default-link-local
2020-11-20tunnel: T3072: xml: harden regex validatorsChristian Poessinger
2020-11-20tunnel: T3072: migrate to get_config_dict()Christian Poessinger
2020-11-18Revert "wireless: T2241: add "wds" CLI option"Christian Poessinger
This reverts commit 806f35b5856c3f8dae634718a6a9e82cc90bb63a. Unfortunately this did not work our in the attempt to bridge a station to a bridge "brX" interface. Also adjusting the wireless interface during operation cause several exceptions and the feature is removed again as it was never in any production system.
2020-11-14options: keyboard: T3038: use proper XML <defaultValue> over hardcoded ↵Christian Poessinger
Python value We should not use hardcoded Python values whenever possible. vyos.xml provides an abstraction of the XML CLI definitions providing default values from the CLI specified via the <defaultValue> node. This increases consistency among all XML/Python wrappers. Additional small fixes in this commit (besides the bad practice incorporating unrelated changes into the same commit) contain: - Keyboard layout shout be explicitly set for /dev/console - Added missing Debian dependency on console-data - When looking for a key in a dict, we do not need to specify dict.keys()
2020-11-14Merge pull request #608 from DmitriyEshenko/kb-layoutChristian Poessinger
system: T3038: Add keyboard layout CLI command
2020-11-13system: T3038: Add keyboard layout CLI commandDmitriyEshenko
2020-11-13Merge branch 'T1316_october' of https://github.com/sever-sever/vyos-1x into ↵Christian Poessinger
t1616-isis * 'T1316_october' of https://github.com/sever-sever/vyos-1x: isis: T1316: October steps
2020-11-13bridge: T3042: Fix VLAN filter invalid workjack9603301
1. Due to the previous focus on the implementation of VLAN filter, it was not considered to include MTU settings, which will lead to MTU setting errors in some cases 2. In order to make VLAN aware of the work of the bridge, it is necessary to specify the allowed VLAN ID range for the bridge itself, and forget to join it before
2020-11-12bridge: T3042: ease help string on allowed-vlan and native-vlanChristian Poessinger
2020-11-12Merge pull request #594 from jack9603301/T3042John Estabrook
bridge: T3042: Support VLAN filter and VLAN sub-interface on the bridge
2020-11-11 mpls-conf: T915: Add MPLS misc parameters, add LDP misc parametersCheeze-It
This commit has to do with the addition of miscellaneous MPLS parameters, as well as miscellaneous LDP parameters. Per c-po, for miscellaneous options and whatnot that do not fit anywhere we will put them into a specific "parameters" node. I also did some global linux configuration changes here. We make changes to kernel options "net.mpls.ip_ttl_propagate" and "net.mpls.default_ttl" which should allow the behavior of VyOS to have the same as routers from the big vendors. I added two LDP options for cisco interoperation TLV and for a dual stack preference. Lastly, I went through and changes some of the help/description fields in the definitions page because I just felt they weren't uniform and the words seemed to not properly explain what they were doing. I also did some code clean up (or tried to...) with comments and whatnot.
2020-11-10bridge: T3042: Support VLAN filter and VLAN sub-interface on the bridgejack9603301
2020-11-08mpls-conf: T915: Add targeted LDP neighbors with parametersCheeze_It
The commit has to do with the addition of targeted LDP neighbors and parameters being added. FRR allows for this functionality and I just wanted to add it. We have basically 4 options that are added. Enabling targeted LDP functionality, the targeted neighbor, the hello interval of targeted sessions, and the hold time of targeted sessions. Both IPv4 and IPv6 has been coded in.
2020-11-07interfaces: dhcp-client: T2997: add option to not request DHCP router addressChristian Poessinger
Some might want to have an IP address handed out by a DHCP server but not want a default route to be installed. This can be done using the CLI command: "set interfaces ethernet eth2 dhcp-options no-default-route"
2020-11-07l2tpv3: T2653: include common "ip" interface optionsChristian Poessinger
2020-11-07macsec: T2653: include common "ip" and "ipv6" interface optionsChristian Poessinger
2020-11-07geneve: T2653: include common "ip" and "ipv6" interface optionsChristian Poessinger
2020-11-07T2653: migrate "ip" and "ipv6" interface options to generic includesChristian Poessinger
This reduces duplicated #include statements as each interface type already contained the individual includes.
2020-11-06system: T3048: add dynamic performance tuning daemonChristian Poessinger
Add new CLI command "set system options performance <latency | throughput>"
2020-11-04mpls-conf: T915: Add session hold time adjustment for static LDP neighborsCheeze_It
The commit has to do with the addition of session hold time parameter for LDP neighbors. This allows for being able to change said hold time on a static neighbor. The way that this works is to have it either delegated to a value (15-65535), or to just be default to whatever FRR stipulates or per the other session configuration values. I opted to remove the "-ipv4-" only because we know it's an IPv4 session that one has to create first. I figure it's redundant to add it there so I removed it.
2020-11-04mpls-conf: T915: Add TTL security for static LDP neighborsCheeze_It
The commit has to do with the addition of TTL security for LDP neighbors. The code was 90% done by Viascheslav. I modified it a little bit to get it to properly work. We added more parameters to the neighbors dynamic loop. Once this is merged then we should be able to add more for the dynamic neighbor statements. The way that this works is to have either TTL disabled, or to add the amount of hops accepted for the neighbor.
2020-11-03Merge branch 'wifi-wpa3' of github.com:c-po/vyos-1x into currentChristian Poessinger
* 'wifi-wpa3' of github.com:c-po/vyos-1x: wireless: T3042: move wifi-regulatory-domain into individual interface definition wireless: T2653: reset wireless priority to crux state wireless: T3034: add WPA3 support wireless: T3043: rename "wpa mode both" to "wpa+wpa2" ifconfig: T2985: fix wireless-bridge creation
2020-11-03wireless: T3042: move wifi-regulatory-domain into individual interface ↵Christian Poessinger
definition