summaryrefslogtreecommitdiff
path: root/op-mode-definitions
AgeCommit message (Collapse)Author
2024-04-01 modified: op-mode-definitions/firewall.xml.inl0crian1
- Added show firewall <sections> detail paths modified: src/op_mode/firewall.py - Added Description as a header to normal "show firewall" commands - Added 'detail' view which shows the output in a list key-pair format Description column was added for these commands and their subsections: show firewall statistics show firewall groups show firewall <family> Detail view was added for these commands: show firewall bridge forward filter detail show firewall bridge forward filter rule <rule#> detail show firewall bridge name <chain> detail show firewall bridge name <chain> rule <rule#> detail show firewall ipv4 forward filter detail show firewall ipv4 forward filter rule <rule#> detail show firewall ipv4 input filter detail show firewall ipv4 input filter rule <rule#> detail show firewall ipv4 output filter detail show firewall ipv4 output filter rule <rule#> detail show firewall ipv4 name <chain> detail show firewall ipv4 name <chain> rule <rule#> detail show firewall ipv6 forward filter detail show firewall ipv6 forward filter rule <rule#> detail show firewall ipv6 input filter detail show firewall ipv6 input filter rule <rule#> detail show firewall ipv6 output filter detail show firewall ipv6 output filter rule <rule#> detail show firewall ipv6 name <chain> detail show firewall ipv6 name <chain> rule <rule#> detail show firewall group detail show firewall group <group> detail
2024-03-28op-mode: T6175: "renew dhcp interface <name>" does not check for DHCP interfaceChristian Breunig
The current op-mode script simply calls sudo systemctl restart "dhclient@$4.service" with no additional information about a client interface at all. This results in useless dhclient processes root 47812 4.7 0.0 5848 3584 ? Ss 00:30 0:00 /sbin/dhclient -4 -d root 48121 0.0 0.0 4188 3072 ? S 00:30 0:00 \_ /bin/sh /sbin/dhclient-script root 48148 50.0 0.2 18776 11264 ? R 00:30 0:00 \_ python3 - Which also assign client leases to all local interfaces, if we receive one valid DHCPOFFER vyos@vyos:~$ show interfaces Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down Interface IP Address MAC VRF MTU S/L Description ----------- ----------------- ----------------- ------- ----- ----- ------------- eth0 - 00:50:56:bf:c5:6d default 1500 u/u eth0.10 172.16.33.102/24 00:50:56:bf:c5:6d default 1500 u/u eth1 172.16.33.131/24 00:50:56:b3:38:c5 default 1500 u/u 172.16.33.102/24 and 172.16.33.131/24 are stray DHCP addresses. This commit moved the renew command to the DHCP op-mode script to properly validate if the interface we request a renew for, has actually a dhcp address configured. In additional this exposes the renew feature to the API.
2024-03-23op-mode: T6161: Show container details in JSON formatAdrian L Lange
I made some assumptions about node types, and I expanded the initial request to also work for networks and containers. I found that the "raw" versions of these commands already existed in the python scripts, so I just used the existing flags.
2024-03-18show log: T6127 - Fixed egrep regex for IPv6l0crian1
2024-03-18show log: T6127 - Fixed egrep regexl0crian1
2024-03-18show log: T6127 - Fixed egrep regexl0crian1
2024-03-17op-mode: T6133: add support to manually trigger commit-archive updateChristian Breunig
Automatic update of the remote commit-archive could fail under certian circumstances, add an op-mode command to manually trigger the update: cpo@LR1.wue3# run force commit-archive Archiving config... git+https://git.FOOO.de/cpo/vyos-config-backup [edit]
2024-03-14xml: T3642: improve PKI CLI help stringChristian Breunig
2024-03-09Merge pull request #3106 from sarthurdev/T6102Daniil Baturin
dhcp: T6102: Fix clear DHCP lease op-mode
2024-03-07Merge pull request #1740 from sarthurdev/tpm_luksDaniil Baturin
config: T4919: Add support for encrypted config with TPM
2024-03-07config: T4919: Add support for encrypted config file with TPMsarthurdev
2024-03-06dhcp: T6102: Fix clear DHCP lease op-modesarthurdev
* Add `clear dhcpv6-server lease` * Standardize using vyos.opmode
2024-02-24container: T6060: support removing all container images at once via op-modeChristian Breunig
cpo@LR1.wue3:~$ show container image REPOSITORY TAG IMAGE ID CREATED SIZE docker.io/library/busybox latest 3f57d9401f8d 5 weeks ago 4.5 MB docker.io/jacobalberty/unifi v7.5 f6df690d6c67 4 months ago 827 MB docker.io/jacobalberty/unifi v7.4 7838b75ef7b9 7 months ago 786 MB cpo@LR1.wue3:~$ delete container image Possible completions: 3f57d9401f8d Delete container image 7838b75ef7b9 all f6df690d6c67 cpo@LR1.wue3:~$ delete container image all cpo@LR1.wue3:~$ show container image REPOSITORY TAG IMAGE ID CREATED SIZE
2024-02-23pki: T6055: Cleanup unnecessary sudo, preserve env when sudo is neededsarthurdev
2024-02-17op-mode: T5581: add "show ipv6 nht" commandChristian Breunig
This improves the implementation to support both IPv4 and IPv6
2024-02-13dhcp: dhcpv6: T3316: Add op-mode for showing DHCP(v6) static-mappingssarthurdev
2024-02-13dhcpv6-server: T5992: Fix op-mode Kea DHCP lease outputsarthurdev
Due to Kea's lease file cleanup, the CSV file content is inconsistent. This commit makes changes to use the Kea control socket to fetch current lease information.
2024-02-08Merge pull request #2507 from erkin/image-toolsDaniil Baturin
op-mode: T4038: Python rewrite of image tools
2024-02-07xml: T302: replace references to Quagga with FRRoutingChristian Breunig
2024-02-01Merge pull request #2860 from indrajitr/ddclient-update-20240119Christian Breunig
ddclient: T5966: Adjust dynamic dns config address subpath
2024-01-30rpki: T6003: Add 'show rpki as-number' and 'show rpki prefix'Jonathan Voss
2024-01-25op-mode: T4038: Python rewrite of image toolserkin
2024-01-22Merge pull request #2871 from c-po/multicast-T5969Christian Breunig
op-mode: T5969: list multicast group membership
2024-01-22op-mode: T5969: list multicast group membershipChristian Breunig
cpo@LR1.wue3:~$ show ip multicast group interface eth0.201 Interface Family Address ----------- -------- --------- eth0.201 inet 224.0.0.6 eth0.201 inet 224.0.0.5 eth0.201 inet 224.0.0.1 cpo@LR1.wue3:~$ show ipv6 multicast group interface eth0 Interface Family Address ----------- -------- ----------------- eth0 inet6 ff02::1:ff00:0 eth0 inet6 ff02::1:ffbf:c56d eth0 inet6 ff05::2 eth0 inet6 ff01::2 eth0 inet6 ff02::2 eth0 inet6 ff02::1 eth0 inet6 ff01::1
2024-01-22op-mode: T5966: Ensure top level property to avoid empty nodeIndrajit Raychaudhuri
Since, we don't have op-mode operation for 'dns dynamic' anymore, we need to add a top level property to avoid empty `templates-op/update/node.def`.
2024-01-22ddclient: T5966: Streamline dynamic dns op-mode configurationIndrajit Raychaudhuri
Update op-mode for dynamic dns to standardize on `vyos.opmode`. All methods of `op_mode/dns_dynamic.py` are now available in standardized `op_mode/dns.py`. Move op-mode command `update dns dynamic` to `reset dns dynamic` to reflect that it is not an update but a reset of the dynamic dns service. Also, make the help texts more consistent for all op-mode commands for `dns dynamic` and `dns forwarding`.
2024-01-21dns: T5959: Streamline dns forwarding serviceIndrajit Raychaudhuri
Streamline configuration and operation of dns forwarding service in following ways: - Remove `dns_forwarding_reset.py` as its functionality is now covered by `dns.py` - Adjust function names in `dns.py` to disambiguate between DNS forwarding and dynamic DNS - Remove `dns_forwarding_restart.sh` as its functionality is inlined in `dns-forwarding.xml` - Templatize systemd override for `pdns-recursor.service` and move the generated override files in /run. This ensures that the override files are always generated afresh after boot - Simplify the systemd override file by removing the redundant overrides - Relocate configuration path for pdns-recursor to `/run/pdns-recursor` and utilize the `RuntimeDirectory` default that pdns-recursor expects - We do not need to use custom `--socket-dir` path anymore, the default path (viz., `/run/pdns-recursor` is fine)
2024-01-19op-mode: xml: remove executable bit from XML definitionChristian Breunig
2024-01-11T5919: firewall: fix <show firewall ipv6 ..> commandNicolas Fort
2024-01-10T5915:firewall: re-add opmode command for zone based firewallNicolas Fort
2024-01-07Merge pull request #2758 from c-po/certbot-T5886Christian Breunig
pki: T5886: add support for ACME protocol (LetsEncrypt)
2024-01-06op-mode: T5904: add "show ipv6 route vrf <name> <prefix>" commandChristian Breunig
We've always had a command to display discrete IPv6 routes/prefixes within the global VRF. This commit also adds support for a discrete VRF. vyos@vyos:~$ show ipv6 route vrf <name> Possible completions: <Enter> Execute the current command <h:h:h:h:h:h:h:h> Show IPv6 routes of given address or prefix <h:h:h:h:h:h:h:h/x>
2024-01-06pki: T5886: add op-mode commands for log and renewalChristian Breunig
* show log certbot * monitor log certbot * renew certbot
2024-01-03op-mode: T5890: Fix arguments passed to generate_system_login_user.pyMatthew Kobayashi
2024-01-02op-mode: T5884: correct "generate wireguard" help stringhwlnx
2023-12-30T3476: Add option latest to add system imageViacheslav Hletenko
Add option `latest` for op-mode command `add system image` If the update check is configured we can get the remote `latest` version from conrfgure URL ``` set system update-check url 'https://example.com/version.json' ``` This way we can use "latest" option for image update: ``` add system image latest ```
2023-12-28op-mode: T5866: Add command to restart IPv6 RA daemonChristian Breunig
vyos@vyos:~$ restart router-advert
2023-12-20T2898: add ndp-proxy serviceChristian Breunig
VyOS CLI command set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static' Will generate the following NDP proxy configuration $ cat /run/ndppd/ndppd.conf # autogenerated by service_ndp-proxy.py # This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route route-ttl 30000 # This sets up a listener, that will listen for any Neighbor Solicitation # messages, and respond to them according to a set of rules proxy eth0 { # Turn on or off the router flag for Neighbor Advertisements router no # Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds) timeout 500 # Control how long a valid or invalid entry remains in the cache (milliseconds) ttl 30000 # This is a rule that the target address is to match against. If no netmask # is provided, /128 is assumed. You may have several rule sections, and the # addresses may or may not overlap. rule 2001:db8::/64 { static } }
2023-12-11srv6: T591: initial implementation to support locator definitionChristian Breunig
VyOS CLI set protocols segment-routing srv6 locator bar prefix '2001:b::/64' set protocols segment-routing srv6 locator foo behavior-usid set protocols segment-routing srv6 locator foo prefix '2001:a::/64' Will generate in FRR segment-routing srv6 locators locator bar prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16 exit ! locator foo prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16 behavior usid exit ! exit ! exit ! exit
2023-12-11bgp: T591: add SRv6 support from FRRChristian Breunig
set protocols bgp sid vpn per-vrf export '99' set protocols bgp srv6 locator 'foo' set protocols bgp system-as '100' Will generate in FRR config router bgp 100 no bgp ebgp-requires-policy no bgp default ipv4-unicast no bgp network import-check ! segment-routing srv6 locator foo exit sid vpn per-vrf export 99 exit
2023-12-09Merge pull request #1960 from sarthurdev/keaChristian Breunig
dhcp: T3316: Migrate dhcp/dhcpv6 server to Kea
2023-12-08git: T5803: Adjust git configuration for baseline defaultsIndrajit Raychaudhuri
Apply baseline defaults for `.gitattributes` and `.vscode/settings.json` for improved developer experience. The `.gitattrbutes` settings are based on: Git documentation (https://git-scm.com/docs/gitattributes#_effects) GitHub documentation (https://docs.github.com/en/get-started/getting-started-with-git/configuring-git-to-handle-line-endings) Community templates (https://github.com/gitattributes/gitattributes) Since editor-agnostic line-ending specific settings are applied to `.gitattributes`, they can be removed from `.vscode/settings.json`. The global VSCode defaults have also been removed to avoid duplication.
2023-12-08Merge pull request #2584 from c-po/T4943-google-authenticatorChristian Breunig
login: T4943: use pam-auth-update to enable/disable Google authenticator
2023-12-08login: T4943: use pam-auth-update to enable/disable Google authenticatorChristian Breunig
The initial version always enabled Google authenticator (2FA/MFA) support by hardcoding the PAM module for sshd and login. This change only enables the PAM module on demand if any use has 2FA/MFA configured. Enabling the module is done system wide via pam-auth-update by using a predefined template. Can be tested using: set system login user vyos authentication plaintext-password vyos set system login user vyos authentication otp key 'QY735IG5HDHBFHS5W7Y2A4EM274SMT3O' See https://docs.vyos.io/en/latest/configuration/system/login.html for additional details.
2023-12-08dhcp: T3316: Migrate dhcp/dhcpv6 server to Keasarthurdev
2023-12-07Merge pull request #2583 from srividya0208/ipv6_ospfv3Christian Breunig
op-mode: T5808: Correction of description for ipv6 ospfv3 graceful-restart
2023-12-07op-mode: T5808: Correction of description for ipv6 ospfv3 graceful-restartsrividya0208
2023-12-07Merge pull request #2551 from nicolas-fort/T5778Daniil Baturin
T5778: dhcp server: fix op-mode command
2023-11-30T5778: dhcp server: fix op-mode command <show dhcp server leases ...>.Nicolas Fort
2023-11-27image-tools: T5751: normalize args using hyphen instead of underscoreJohn Estabrook