summaryrefslogtreecommitdiff
path: root/python
AgeCommit message (Collapse)Author
2021-09-26vyos.ifconfig: T3860: bugfix in get_mac_synthetic()Christian Poessinger
Commit 081e23996f (vyos.ifconfig: get_mac_synthetic() must generate a stable "MAC") calculated a "stable" synthetic MAC address per the interface based on UUID and the interface name. The problem is that this calculation is too stable when run on multiple instances of VyOS on different hosts/hypervisors. Having R1 and R2 setup a connection both via "tun10" interface will become the same "synthetic" MAC address manifesting in the same link-local IPv6 address. This e.g. breaks OSPFv3 badly as both neighbors communicate using the same link-local address. As workaround one can: set interfaces tunnel tun1337 address 'fe80::1:1337/64' set interfaces tunnel tun1337 ipv6 address no-default-link-local This commit changes the way in how the synthetic MAC address is generated. It's based on the first 48 bits of a sha256 sum build from a CPU ID retrieved via DMI, the MAC address of eth0 and the interface name as used before. This should add enough entropy to get a stable pseudo MAC address.
2021-09-25vyos.ifconfig: dhcpv6: re-use systemd_service definition variableChristian Poessinger
2021-09-25vyos.ifconfig: dhcp: T3300: always re-start dhcp client instead of startChristian Poessinger
Commit dd2eb5e5686655 ("dhcp: T3300: add DHCP default route distance") changed the logic on how the DHCP process is going to be started. The systemd unit was always "started" even if it was already running. It should rather be re-started to track changes in e.g. the DHCP hostname setting.
2021-09-21vrrp: keepalived: T3847: migrate to get_config_dict()Christian Poessinger
2021-09-21vrrp: keepalived: T616: move configuration to volatile /run directoryChristian Poessinger
Move keepalived configuration from /etc/keepalived to /run/keepalived.
2021-09-20ifconfig: T2104: cleanup IPv6 EUI-64 handling in update()Christian Poessinger
2021-09-20vyos.ifconfig: get_mac_synthetic() must generate a stable "MAC"Christian Poessinger
Commit b7d30137b1 ("vyos.ifconfig: provide generic get_mac_synthetic() method") provided a common helper to generate MAC addresses used by EUI64 addresses for interfaces not having a layer2 interface (WireGuard or ip tunnel). The problem is that every call to the helper always yielded a new MAC address. This becomes problematic when IPv6 link-local addresses are generated and modified on the interface as multiple link-local (fe80::/64) addresses can easily be added to the interface leaving ... a mess. This commit changes the way how the "synthetic" MAC is generated, we generate a UUID which is stable as it is based on the interface name. We take out the last 48 bits of the UUID and form the "MAC" address.
2021-09-20vyos.ifconfig: T2738: can only read from a file when it existsChristian Poessinger
When IPv6 is disbaled on an interface also the sysfs files related to IPv6 for this interface vanish. We need to check if the file exists before we read it.
2021-09-19vyos.ifconfig: T2738: do not remove OS assigned IP addresses from interfaceChristian Poessinger
When using VRRP on any given interface and performing an action against that interface - be it even only changing the alias - will trigger a removal of the VRRP IP address. The issue is caused by: # determine IP addresses which are assigned to the interface and build a # list of addresses which are no longer in the dict so they can be removed cur_addr = self.get_addr() for addr in list_diff(cur_addr, new_addr): When the script calls into the library - we will drop all IP addresses set on the adapter but not available in the config dict. We should only remove the IP addresses marked by the CLI to be deleted!
2021-09-19vyos.configdict: bugfix: leaf_node_changed() must return empty dict when ↵Christian Poessinger
node is added Commit f476e456 ("vyos.configdict: leaf_node_changed() must return empty dict when node is added") returned [''] as "empty" dict - but this is not empty. >>> if ['']: ... print('foo') ... foo It should rather be: []
2021-09-19vyos.ifconfig: T2738: add delta check when changing interface parametersChristian Poessinger
There is no need to alter interface parameters if they have not changed at all.
2021-09-18ipsec: vti: T3831: avoid usinf xfrm if_id 0 - implement shift by oneChristian Poessinger
The key defaults to 0 and will match any policies which similarly do not have a lookup key configuration. This means that a vti0 named interface will pull in all traffic and others will stop working. Thus we simply shift the key by one to also support a vti0 interface.
2021-09-13ipsec: T3828: Use IKE dh-group when ESP dh-group is set to `enable`sarthurdev
2021-09-11Fix inconsistent capitalization in the show version outputDaniil Baturin
2021-09-10ethtool: T3802: extend check_speed_duplex() implementation to support 'auto'Christian Poessinger
(cherry picked from commit 3037661951d0e5d1f6264f886781b7ddc019329e)
2021-09-10ethernet: T3802: not all NICs support reading speed/duplex settings in all ↵Christian Poessinger
states Turns out an AX88179 USB 3.0 NIC does not support reading back the speed and duplex settings in every operating state. While the NIC is beeing initialized, reading the speed setting will return: $ cat /sys/class/net/eth6/speed cat: /sys/class/net/eth6/speed: Invalid argument Thus if this happens, we simply tell the system that the current NIC speed matches the requested speed and nothing is changed at this point in time. (cherry picked from commit e2b7e1766cc22c5cd718a5001be6336bdca92eec)
2021-09-10ethernet: T3802: use only one implementation for get_driver_name()Christian Poessinger
Move the two implementations to get the driver name of a NIC from ethernet.py and ethtool.py to only ethtool.py. (cherry picked from commit 07840977834816b69fa3b366817d90f44b5dc7a7)
2021-09-10ethernet: T3802: check if driver supports changing flow-control settingsChristian Poessinger
(cherry picked from commit 1572edd2cef355710d1129907d3e49451a6c31d4)
2021-09-09vyos.configdict: T3814: use no_tag_node_value_mangle in get_interface_dict()Christian Poessinger
This change is required and currently only impacts WireGuards peer configuration, so that the peers name is not mangled.
2021-09-08openvpn: T3805: use vyos.util.write_file() to store certificatesChristian Poessinger
2021-09-06pki: eapol: T3642: only add "pki" key to interface dict if pki is configuredChristian Poessinger
2021-09-06ifconfig: T3806: "ipv6 address no_default_link_local" required for MTU < 1280Christian Poessinger
This commit also extends the smoketest to verify that the exception for this error is raised.
2021-09-06vyos.util: add function to search a key recursively in a dictionaryChristian Poessinger
data = { 'interfaces': {'dummy': {'dum0': {'address': ['192.0.2.17/29']}}, 'ethernet': {'eth0': {'address': ['2001:db8::1/64', '192.0.2.1/29'], 'description': 'Test123', 'duplex': 'auto', 'hw_id': '00:00:00:00:00:01', 'speed': 'auto'}, 'eth1': {'address': ['192.0.2.9/29'], 'description': 'Test456', 'duplex': 'auto', 'hw_id': '00:00:00:00:00:02', 'speed': 'auto'}}} } dict_search_recursive(data, 'hw_id') will yield both '00:00:00:00:00:01' and '00:00:00:00:00:02' as generator object.
2021-09-06vyos.util: T2755: rename dict_search() function args to match other ↵Christian Poessinger
implementations
2021-08-31vyos.ethtool: T3163: ring-buffer values should be stored as stringChristian Poessinger
Commit 29082959 ("ethernet: T3163: only change ring-buffer settings if required") added a delta-check code for the ring buffer values, unfortunately this was never properly evaluated as str() and int() got compared resulting always in an unequal result.
2021-08-31vyos.ethtool: T3163: purify code to read and change flow-control settingsChristian Poessinger
It makes no sense to have a parser for the ethtool values in ethtool.py and ethernet.py - one instance ios more then enough!
2021-08-31ethernet: T3163: only change ring-buffer settings if requiredChristian Poessinger
Only update the RX/TX ring-buffer settings if they are different from the ones currently programmed to the hardware. There is no need to write the same value to the hardware again - this could cause traffic disruption on some NICs.
2021-08-31vyos.ethtool: T3163: purify code to read current speed and duplex settingsChristian Poessinger
It makes no sense to have a parser for the ethtool value sin ethtool.py and ethernet.py - one instance ios more then enough!
2021-08-31ethernet: T2241: check if interface supports changing speed/duplex settingsChristian Poessinger
Not all interface drivers have the ability to change the speed and duplex settings. Known drivers with this limitation are vmxnet3, virtio_net and xen_netfront. If this driver is detected, an error will be presented to the user.
2021-08-31vyos.ethtool: T3163: use long option names when calling the ethtool binrayChristian Poessinger
This makes understanding the code easier what is "really" called without opening the man page.
2021-08-30ethernet: T3787: remove deprecated UDP fragmentation offloading optionChristian Poessinger
Deprecated in the Linux Kernel by commit 08a00fea6de277df12ccfadc21 ("net: Remove references to NETIF_F_UFO from ethtool."). (cherry picked from commit f5e46ee6cc2b6c1c1869e26beca4ccd5bf52b62f)
2021-08-30vyos.ifconfig: T3619: only inform user about real offload change for invalid ↵Christian Poessinger
option Commit 31169fa8 ("vyos.ifconfig: T3619: only set offloading options if supported by NIC") added a warning for the user if an offload option was about to change that was not possible at all (harware limit). Unfortunately the warning was even displayed if nothing was done at all. This got corrected.
2021-08-30vyos.ethtool: T3163: remove test and debug method get_rx_vlan_offload()Christian Poessinger
2021-08-30config: T2941: ignore unicode characters, e.g., in description fieldJohn Estabrook
2021-08-30Merge pull request #983 from sever-sever/T3782Christian Poessinger
interface: T3782: Fix unexpected delete qdisc rule
2021-08-30interface: T3782: Fix unexpected delete qdisc ruleViacheslav
Some tc qdisc rules are generated by old perl code It prevent to unexpected override this code by python.
2021-08-29vyos.ethtool: T3163: add check_speed_duplex() methodChristian Poessinger
Add a new method which supports checking if the desired speed and duplex setting is actually supported by the underlaying network interface card. >>> from vyos.ethtool import Ethtool >>> tmp = Ethtool('eth0') >>> tmp.check_speed_duplex('100', 'full') False >>> tmp.check_speed_duplex('1000', 'full') True
2021-08-29vyos.ethtool: T3163: prefix class internal data structures with _Christian Poessinger
2021-08-29vyos.ethtool: T3163: drop obsoleted is_fixed_lro() methodChristian Poessinger
Commit d22f97af ("vyos.ethtool: T3163: rename unused methods for offload validation") reworked the entire class on how data should be presented to the user, but forgot to drop the is_fixed_lro() method.
2021-08-29interfaces: T3777: Does not delete empty eui64 addressViacheslav
Check eui64_old value before deleting It can be empty or not ipv6 address. (cherry picked from commit 0de23064b9d575ce0569839e3b4453a0c2e9dc1c)
2021-08-28vyos.ifconfig: T3619: only set offloading options if supported by NICChristian Poessinger
In the past we always told ethtool to change the offloading settings, even if this was not supported by the underlaying driver. This commit will only change the offloading options if they differ from the current state of the NIC and only if it's supported by the NIC. If the NIC does not support setting the offloading options, a message will be displayed for the user: vyos@vyos# set interfaces ethernet eth2 offload gro vyos@vyos# commit [ interfaces ethernet eth2 ] Adapter does not support changing large-receive-offload settings!
2021-08-28vyos.ethtool: T3163: rename unused methods for offload validationChristian Poessinger
2021-08-28Merge pull request #980 from zdc/T3763-sagittaChristian Poessinger
wireguard: T3763: Added check for listening port availability
2021-08-27vyos.ifconfig: pppoe: T3778: bugfix assignemnt of cached configChristian Poessinger
We need to copy the configuration before this is done in super().update() as we utilize self.set_dhcpv6() before this is done by the base class.
2021-08-26vyos.util: T3763: Optimized the check_port_availability functionzsdc
`print` was removed or replaced to `ValueError`, where possible.
2021-08-26wireguard: T3763: Added check for listening port availabilityzsdc
Each wireguard interface requires a unique port for in and out connections. This commit adds the new `vyos.util` function - `check_port_availability`, and uses it to be sure that a port that is planned to be used for wireguard interface is truly available and not used by any other services (not only other wireguard interfaces).
2021-08-25ipsec: T3775: Diffie Hellman Group 21 uses NIST Elliptic Curve "ecp521"Christian Poessinger
... there was a type setting ecp512 instead of ecp521.
2021-08-24vyos.ifconfig: T3772: bugfix missing VRRP interfacesChristian Poessinger
When the interface name was stripped down from "eth0.201" to "eth" to determine the appropriate interface section, VRRP interfaces got left out on the call to rstrip(). VRRP interfaces now show up in "show interfaces" as they did in VyOS 1.2. vyos@vyos:~$ show interfaces Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down Interface IP Address S/L Description --------- ---------- --- ----------- dum0 172.18.254.201/32 u/u eth0 - u/u eth0.10 172.16.33.8/24 u/u eth0.201 172.18.201.10/24 u/u eth1 10.1.1.2/24 u/u eth1v10 10.1.1.1/24 u/u eth2 - u/u lo 127.0.0.1/8 u/u ::1/128
2021-08-21vyos.configverify: use build-in functions for verify_interface_exists()Christian Poessinger
2021-08-21vyos.configdict: leaf_node_changed() must return empty dict when node is addedChristian Poessinger
vyos@vyos# show interfaces pppoe pppoe pppoe10 { + access-concentrator asdfg authentication { password bar user foo } default-route force no-peer-dns source-interface eth0.202 } vyos@vyos# python3 Python 3.9.2 (default, Feb 28 2021, 17:03:44) [GCC 10.2.1 20210110] on linux Type "help", "copyright", "credits" or "license" for more information. >>> from vyos.config import Config >>> from vyos.configdict import get_interface_dict >>> from vyos.configdict import leaf_node_changed >>> conf = Config() >>> base = ['interfaces', 'pppoe'] >>> tmp = get_interface_dict(conf, base, 'pppoe10') >>> leaf_node_changed(conf, ['access-concentrator']) >>> ['']
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 15:34:23 +0000