Age | Commit message (Collapse) | Author |
|
|
|
filter and in policy route.
|
|
|
|
T5217: Add firewall synproxy
|
|
|
|
smoketest: T5607: support getting SCSI device by drive-id
|
|
Add ability to SYNPROXY connections
It is useful to protect against TCP SYN flood attacks and port-scanners
set firewall global-options syn-cookies 'enable'
set firewall ipv4 input filter rule 10 action 'synproxy'
set firewall ipv4 input filter rule 10 destination port '22'
set firewall ipv4 input filter rule 10 inbound-interface interface-name 'eth1'
set firewall ipv4 input filter rule 10 protocol 'tcp'
set firewall ipv4 input filter rule 10 synproxy tcp mss '1460'
set firewall ipv4 input filter rule 10 synproxy tcp window-scale '7'
|
|
|
|
|
|
|
|
init: T5239: configure system hostname prior to FRR startup
|
|
supports HW flowtable offload
- Add required offload setting for interfaces + flowtable offload (hw-tc-offload)
- Verification of interface support for hardware offloaded flowtables
|
|
`set firewall flowtable <name> interface <ifname>`
`set firewall flowtable <name> offload [software|hardware]`
`set firewall [ipv4|ipv6] forward filter rule N action offload`
`set firewall [ipv4|ipv6] forward filter rule N offload-target <name>`
|
|
|
|
T5590: firewall log rule: fix order which rule are processed
|
|
conntrack: T5571: Refactor conntrack using vyos.configdep
|
|
- Moves MSS node out of `tcp-flags.xml.i` and into `tcp-mss.xml.i`
- Update smoketest to verify TCP flag matching
|
|
should be added at the end of the rule, after all matchers and befora action. Also change 2 lines in policy_route smoketest, which suddenly wasn't working as expected
|
|
address, and not only global ipv6 address. This allows to configure ipv6 link local address on vrrp hello-source-address parameter.
|
|
Interface 'any' not expected in nft rules, it means that option
iifname shouldn't exist at all
set system conntrack ignore ipv4 rule 10 inbound-interface 'any'
table ip raw {
chain VYOS_CT_IGNORE {
iifname "any" counter packets 0 bytes 0 notrack comment "ignore-10"
return
}
}
Fix it
|
|
|
|
|
|
T5518: Add basic MLD support
|
|
FRR supports a new way of configuring VLAN-to-VNI mappings for EVPN-VXLAN, when
working with the Linux kernel. In this new way, the mapping of a VLAN to a VNI
is configured against a container VXLAN interface which is referred to as a
'Single VXLAN device (SVD)'.
Multiple VLAN to VNI mappings can be configured against the same SVD. This
allows for a significant scaling of the number of VNIs since a separate VXLAN
interface is no longer required for each VNI.
Sample configuration of SVD with VLAN to VNI mappings is shown below.
set interfaces bridge br0 member interface vxlan0
set interfaces vxlan vxlan0 external
set interfaces vxlan vxlan0 source-interface 'dum0'
set interfaces vxlan vxlan0 vlan-to-vni 10 vni '10010'
set interfaces vxlan vxlan0 vlan-to-vni 11 vni '10011'
set interfaces vxlan vxlan0 vlan-to-vni 30 vni '10030'
set interfaces vxlan vxlan0 vlan-to-vni 31 vni '10031'
|
|
T4072: add firewall bridge filtering.
|
|
Currently VyOS has `protocol igmp` option to enable IGMP querier and reports through FRR's pimd.
I would like to add support for IPv6 as well since FRR's IPv6 multicast functionality has significantly improved.
Enabling both MLD and IGMP on a VyOS router will allow us to turn on multicast snooping on layer-3 switches in dual-stack networks.
Example commands:
```
// Enable on interface eth0
set protocols pim6 interface eth0
// Explicitly join multicast group ff18::1234 on interface eth1
set protocols pim6 interface eth1 mld join ff18::1234
// Explicitly join source-specific multicast group ff38::5678 with source address 2001:db8::1 on interface eth1
set protocols pim6 interface eth1 mld join ff38::5678 source 2001:db8::1
```
|
|
forward chain and few matchers. Should be extended in the future.
|
|
|
|
Add support for defining config-mode dependencies in add-on packages.
|
|
conntrack: T4309: T4903: Refactor `system conntrack ignore`, add IPv6 support and firewall groups
|
|
interface: T5550: Interface source-validation priority over global value
|
|
The legacy config-mgmt/save-config tools had an abiding bug that would
raise an error if comparing/reading the init archive; this is no longer
an issue.
|
|
|
|
|
|
- Migrate IPv4 source-validation to nftables
- Interface source-validation value takes priority, fallback to global value
|
|
* netns:
smoketest: T5241: re-work netns assertions and provide common utility helper
netns: T5241: simplify network namespace handling
netns: T5241: improve get_interface_namespace() robustness
netns: T5241: use common interface_exists() helper
netns: T5241: provide is_netns_interface utility helper
T5241: Support netns for veth and dummy interfaces
|
|
|
|
|
|
add IPv6 support and firewall groups
|
|
Checks if an IPv6 address on a specific network interface is
in the tentative state. IPv6 tentative addresses are not fully configured
and are undergoing Duplicate Address Detection (DAD) to ensure they are
unique on the network.
inet6 2001:db8::3/125 scope global tentative
It tentative state the group enters in FAULT state. Fix it
|
|
|
|
|
|
|
|
https://github.com/sever-sever/vyos-1x into netns
* 'T5241-control-edition' of https://github.com/sever-sever/vyos-1x:
T5241: Support netns for veth and dummy interfaces
|
|
eapol: T4782: Support multiple CA chains
|
|
|
|
See https://vyos.dev/T5519 for more information.
|
|
|
|
|
|
T5472: nat redirect: allow redirection without defining redirected port
|