summaryrefslogtreecommitdiff
path: root/python
AgeCommit message (Collapse)Author
2020-12-20dhcpv6: T3134: add missing duid supportChristian Poessinger
2020-12-19xdp: T2666: switch to example code provided by xdp-tutorialChristian Poessinger
2020-12-17ifconfig: T2653: switch to Python3 f(ormatted) stringsChristian Poessinger
2020-12-17xdp: T2666: use generic "xdp" option when loadingChristian Poessinger
Using 'xdp' will automatically decide if the driver supports 'xdpdrv' or only 'xdpgeneric'. A user later sees which driver is actually in use by calling 'ip a' or 'show interfaces ethernet'.
2020-12-17xdp: T2666: initial XDP (generic mode) forwarding supportChristian Poessinger
The CLI command 'set interfaces ethernet <interface> offload-options xdp" enables the XDP generic mode on the given interface. vyos@vyos:~$ show interfaces ethernet eth1 eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 xdpgeneric/id:151 qdisc mq state DOWN group default qlen 1000 link/ether 00:50:56:bf:ef:aa brd ff:ff:ff:ff:ff:ff inet6 fe80::250:56ff:febf:efaa/64 scope link tentative valid_lft forever preferred_lft forever Description: fooa XDP code is thankfully copied from [1], thank you for this nice tutorial. NOTE: this is an experimental feature which might break your forwarding/filtering. [1]: https://medium.com/swlh/building-a-xdp-express-data-path-based-peering-router-20db4995da66
2020-12-14interface: mirror: T3089: Improve logic to reduce unnecessary lines of codejack9603301
2020-12-13interfaces: mirror: T3089: Fix the dependency problem between interfacesjack9603301
Since the dependency problem has not been solved before, if the monitoring interface does not exist when the mirror rule is created, the execution will be abnormal
2020-12-13interfaces: T3114: Modify the logic of the second addition to complete the ↵jack9603301
setting and streamline the code
2020-12-13interfaces: T3114: Improve VLAN ID setting logic in `bridge`jack9603301
2020-12-13interfaces: T3114: When the VLAN aware option is not detected, the setting ↵jack9603301
of `bridge` should not be overwritten
2020-12-13interfaces: T3114: Improve the processing of enabling logic for ↵jack9603301
`vlan_filter` to avoid redundant paths
2020-12-13interfaces: T3114: Remove some redundant codejack9603301
2020-12-13interfaces: T3114: Fix VLAN-aware bridge setting failurejack9603301
2020-12-08Merge pull request #633 from jack9603301/T3089Christian Poessinger
mirror: T3089: support two-way traffic mirroring
2020-12-08mirror: T3089: support two-way traffic mirroringjack9603301
2020-12-07vyos.ifconfig: T1579: keep IPv6 link-local address on reconfiguration #2Christian Poessinger
This is the second attempt after commit d247736f ("vyos.ifconfig: T1579: do not remove IPv6 link-local address on reconfiguration"). We only clean out link-local IPv6 addresses left over after an interface MAC change.
2020-12-07Merge pull request #636 from c-po/t2562-dhcpChristian Poessinger
dhcp: T2562: add "listen-address" CLI node for better DHCP relay support
2020-12-06vyos.validate: T1579: support prefix length in is_ipv6_link_local()Christian Poessinger
Function can now be called with a prefix length like 2001:db8::1/64
2020-12-06Revert "vyos.ifconfig: T1579: do not remove IPv6 link-local address on ↵Christian Poessinger
reconfiguration" This reverts commit d247736f67cc056062b75a4215a031bebcfee2ee. We need to clean link-local IPv6 addresses on link reconfiguration to also drop no longer existing link-local addresse son MAC address change.
2020-12-06vyos.ifconfig: T1579: do not remove IPv6 link-local address on reconfigurationChristian Poessinger
2020-12-06dhcp: T2562: add "listen-address" CLI node for better DHCP relay supportChristian Poessinger
Running ISC DHCP server as backend server for multiple pools served to relay agents requires DHCPd to explicitly listen on give interfaces or a "transit" subnet declaration facing the network where we receive the DHCPREQ messages on. This implements a new "listen-address" CLI node, the given address is validated if it is assigned to the system and upon success, a proper "subnet { }" statement is added into dhcpd.conf
2020-12-04dhcp: T3100: migrate server configuration to get_config_dict()Christian Poessinger
2020-12-04vyos.ifconfig: T1579: migrate "ip source-validation" option from ↵Christian Poessinger
vyatta-cfg-quagga
2020-12-04Merge pull request #621 from jack9603301/T3089Christian Poessinger
interface: T3089: Migrate port mirroring to vyos-1x
2020-12-03interface: T3089: Migrate port mirroring to vyos-1xjack9603301
2020-12-02T3103: Extended vyos.frr without multiline regexRunar Borge
using multiline regexes are quite hard to "read" and are really easy to mess up, this commit adds a new more pythonic implementation of the library that do not need any multiline regexes.
2020-11-30limericks: Fix typos and rhymeerkin
2020-11-27vyos.template: T2720: always enable Jinja2 trim_blocks featureChristian Poessinger
2020-11-27vyos.configdict: T2665: add task id comment for later refactoringChristian Poessinger
2020-11-26tunnel: T3072: remove bridgable variable as this is already set by the base ↵Christian Poessinger
class
2020-11-26wireguard: T2653: interface is not bridgeableChristian Poessinger
FileNotFoundError: [Errno 2] failed to run command: ip link set dev wg01 master br0
2020-11-23tunnel: T3072: 'gre' devices do not support bridgingChristian Poessinger
2020-11-23bridge: T2875: handle OS exception when wifi interface does not support bridgingChristian Poessinger
2020-11-23vyos.template: fix is_ipv6 Jinja2 filterChristian Poessinger
Commit 6962bc53 ("vyos.template: provide general is_ip(v4|v6) helpers") introduced new Jinja2 template filters, but the one for checking an address if it is an IPv6 address was broken as it was yet unused.
2020-11-22defaults: T3082: multi_to_list must distinguish between values and defaultsJohn Estabrook
2020-11-22configdict: T3081: honor whitespace in multi node valuesJohn Estabrook
2020-11-21bridge: T3079: bugfix on VLAN 1 is deleted in VLAN-aware bridgesJACK
2020-11-20tunnel: T3072: remove debug print codeChristian Poessinger
2020-11-20wireguard: T2653: fix IPv6 peer address configurationChristian Poessinger
While migration to get_config_dict() was introduced in commit 789775af9f5 the logic for adding an IPv4 or IPv6 peer address was using the wrong dictionary to determine if it's an IPv4 or IPv6 address. We now use the proper peer dict over the wrong config dict.
2020-11-20wireguard: T3077: automatically create link-local IPv6 adressesChristian Poessinger
link-local addresses can still be disabled using: set interfaces wireguard wg0 ipv6 address no-default-link-local
2020-11-20tunnel: T3072: drop dead codeChristian Poessinger
2020-11-20tunnel: T3072: support changing tunnel encapsulation on-the-flyChristian Poessinger
2020-11-20tunnel: T3068: automatic generate link-local adressesChristian Poessinger
2020-11-20tunnel: T3072: migrate to get_config_dict()Christian Poessinger
2020-11-19ifconfig: T1405: ensure MAC address is configured firstChristian Poessinger
The MAC address is changed after we have set an IP address on the interface or started dhclient. This will cause some users to receive the wrong IP address on device startup. Change to order of how parameters are set in the system. The interface MAC address is now configured first.
2020-11-19bridge: T3067: Fix VLAN aware setting failure under WLAN (#613)JACK
In the implementation of T3042, it will cause two problems: 1. Even if VLAN awareness is not enabled, the VLAN settings of the vlan filter will be modified. When the bridge member has a WLAN interface, the error is exposed, so repair it here. You should not modify the related settings when the VLAN awareness mode is not enabled 2. Even if VLAN awareness is not enabled, the VLAN settings of the vlan filter will be modified. When the bridge member has a WLAN interface, due to special settings, the bridge mode cannot be entered and the settings cannot be completed directly. Therefore, the WLAN interface should be rejected Enter the bridge with VLAN awareness
2020-11-18Revert "wireless: T2241: add "wds" CLI option"Christian Poessinger
This reverts commit 806f35b5856c3f8dae634718a6a9e82cc90bb63a. Unfortunately this did not work our in the attempt to bridge a station to a bridge "brX" interface. Also adjusting the wireless interface during operation cause several exceptions and the feature is removed again as it was never in any production system.
2020-11-14Merge pull request #604 from jack9603301/T3042Christian Poessinger
bridge: T3042: Better fix implementation errors
2020-11-14bridge: T3042: Better fix implementation errorsjack9603301
In #601, I provided a basic patch. Under this patch, I rely on vif to detect the vlan id range that the bridge should flow through, which may lead to greater redundancy in the configuration, so I am considering detecting effective vlan filters In setting the range of vlan id that is required to flow through the bridge, I use set() to complete the deduplication of this vlan id and set it to the bridge uniformly (at the same time, I slightly modified the smoke test script)
2020-11-14Merge pull request #610 from vyos/revert-607-T2802Christian Poessinger
Revert "T2802: Tunnel interface does not apply EUI-64 IPv6 Address"