Age | Commit message (Collapse) | Author |
|
Provide an XML/Python abstraction to
* ip disable-arp-filter
* ip enable-arp-accept
* ip enable-arp-announce
* ip enable-arp-ignore
The old implementation can co-exist until the last interfaces have been
migrated.
|
|
instead of providing three copies of the same method in bonding, ethernet and
wireless, make a common function in vyos.ifconfig_vlan.apply_vlan_config().
|
|
|
|
Tested using:
R1:
---
set interfaces l2tpv3 l2tpeth10 address '2001:db8:beef::1/64'
set interfaces l2tpv3 l2tpeth10 address '100.0.0.1/24'
set interfaces l2tpv3 l2tpeth10 destination-port '3000'
set interfaces l2tpv3 l2tpeth10 encapsulation 'udp'
set interfaces l2tpv3 l2tpeth10 local-ip '172.18.201.10'
set interfaces l2tpv3 l2tpeth10 peer-session-id '10'
set interfaces l2tpv3 l2tpeth10 peer-tunnel-id '100'
set interfaces l2tpv3 l2tpeth10 remote-ip '172.18.204.10'
set interfaces l2tpv3 l2tpeth10 session-id '20'
set interfaces l2tpv3 l2tpeth10 source-port '6000'
set interfaces l2tpv3 l2tpeth10 tunnel-id '200'
R2:
---
set interfaces l2tpv3 l2tpeth10 address '2001:db8:beef::2/64'
set interfaces l2tpv3 l2tpeth10 address '100.0.0.2/24'
set interfaces l2tpv3 l2tpeth10 destination-port '6000'
set interfaces l2tpv3 l2tpeth10 encapsulation 'udp'
set interfaces l2tpv3 l2tpeth10 local-ip '172.18.204.10'
set interfaces l2tpv3 l2tpeth10 peer-session-id '20'
set interfaces l2tpv3 l2tpeth10 peer-tunnel-id '200'
set interfaces l2tpv3 l2tpeth10 remote-ip '172.18.201.10'
set interfaces l2tpv3 l2tpeth10 session-id '10'
set interfaces l2tpv3 l2tpeth10 source-port '3000'
set interfaces l2tpv3 l2tpeth10 tunnel-id '100'
|
|
|
|
|
|
|
|
- management-address is not a <multi/> node
- added new vyos.validate.is_loopback_addr() function - returns true is address
passed is a looback address
|
|
|
|
A delta-check problem caused the deletion of each and every VLAN interface
when anything under an interface has been changed. This also cause PPPoE
session interruptions.
|
|
In addition to ignoring edit level for the session config (12a21a4b),
the running config should be parsed from the top level.
|
|
|
|
* 'current' of github.com:vyos/vyos-1x:
T1855, T1826: Restore support for reboot/poweroff in M minutes.
vyos.config: T1764: allow for list argument to exists, in value case
vyos.config: T1846: ignore edit level when obtaining working config
T1843: use include files for interface proxy-arp-pvlan option
T1843: use include files for interface proxy-arp configuration
T1843: use include files for interface arp-cache-timeout configuration
T1843: use include files for interface link-detect feature
T1843: use include files for interface MTU size
T1843: use include files for interface MAC address
T1843: use include files to disable interface (admin down)
T1843: use include files for interface description
T1843: use include files for DHCP/DHCPv6 options
T1843: recursively include IP address definitions in VIF/VIF-S definitions
T1843: add support for recursive includes
T1843: use include files for VIF/VIF-S interfaces
T1843: use include files for IPv4/IPv6 interface address configuration
T1843: run interface-definitions though GCC preprocessor
|
|
|
|
|
|
|
|
* 'current' of github.com:vyos/vyos-1x:
openvpn: bridge: T1556: remove obsolete bridge-group definition
ifconfig: T1849: fix DHCPv6 startup
Python/VyOS validate: T1849: handle is_ipv6()/is_ipv6() exceptions
ifconfig: T1793: remove dhcpv6 client debug output
ddclient: T1853: bugfix TypeError exception
syslog: T1845: syslog host no longer accepts a port
syslog: code formatting
syslog: T1845: syslog host no longer accepts a port
syslog: renaming files and conf script to fit new scheme
T1855, T1826: clean up the reboot/shutdown script.
wireguard: T1853: disable peer doesn't work
Revert "syslog: T1845: syslog host no longer accepts a port"
dmvpn: T1784: Add swanctl load call
syslog: T1845: syslog host no longer accepts a port
[vyos.config] T1847: correctly set_level for path given as empty string
|
|
|
|
|
|
|
|
|
|
* 'current' of github.com:vyos/vyos-1x:
shutdown: T1826: Modify cancel reboot msg
T1801: move escaping of backslashes into configtree
vxlan: T1636: remove unused import statements
geneve: T1799: remove unused import statements
|
|
|
|
|
|
|
|
|
|
* 'current' of github.com:vyos/vyos-1x:
bridge: T1673: re-use "base" variable
bridge: T1673: add missing VLAN bridge member migration
geneve: T1799: add misssing "vni" to default_config_data
vxlan: T1636: add misssing "vni" to default_config_data
geneve: T1799: set minimum MTU size 1500 bytes
geneve: T1799: add IPv4 routing parameters
geneve: T1799: support bridging
geneve: T1799: add Generic Network Virtualization Encapsulation
|
|
|
|
* current:
wireless: T1627: support station mode
wireless: T1627: support DHCP(v6) addresses
wireless: T1627: add support for RADIUS source-address
wireless: T1627: RADIUS servers must have a key specified
wireless: T1627: change RADIUS CLI syntax
l2tp: harmonize RADIUS wording
wireless: T1627: re-order WPA key in hostapd config
wireless: T1627: change priority from 318 to 400
wireless: T1627: fix generated ht_capab and vht_capab
wireless: T1627: fix regex for 'ht channel-set-width'
wireless: T1627: config migrator does not support camel casing
wireless: T1627: initial rewrite of show-wireless.pl in Python
wireless: T1627: add op-mode commands
wireless: T1627: initial rewrite in XML/Python style
pppoe-server: T1821: Set radius module priority
T1818: Print name of migration script on failure
T1814: Add log of migration scripts run during config migration
vyos-hostsd: T1812: run increment first
[vyos-hostsd] T1812: Reload pdns on dhcp client update
migration-scripts: l2tp: T1811: add missing check on server existence
|
|
|
|
|
|
* 'current' of github.com:vyos/vyos-1x:
dns: T1786: add proper processing of 'system disable-dhcp-nameservers'
openvpn: fix typo in op-mode command on display rx bytes
T1801: escape isolated backslashes before passing to ConfigTree()
wireless: T1627: fix interface names for list_interfaces.py
[service https] T1443: add setting of HTTPS listen port
|
|
|
|
* 'current' of github.com:vyos/vyos-1x:
ifconfig: T1793: extend set_speed_duplex() delta check
[OpenVPN]: T1704: Added uppercase entries of ncp-ciphers, since there seems to be a bug in OpenVPN client when comparing pushed cipher with local ncp cipher list
[OpenVPN]: T1704: Moved ncp-ciphers out of encryption block in config template
[OpenVPN]: T1704: Changed the description of ncp-ciphers in config
[OpenVPN]: T1704: Added function for ncp-ciphers, and ability to disable it. [OpenVPN]: T1704: Changed config structure for OpenVPN encryption to support ncp-ciphers. [OpenVPN]: T1704: Added migration scripts for interface 2-to-3
Intel QAT: T1788: Intel QAT implementation
ifconfig: T1793: add delta check on set_speed_duplex()
ifconfig: T1793: add delta check on set_flow_control()
Python/ifconfig: wireguard: remove trailing whitespaces
l2tp: T1747: automatically calculate gw-ip-address
QAT: T1788: Intel QAT implementation
|
|
Commit 9e4947770064 ("ifconfig: T1793: add delta check on set_speed_duplex()")
was wave1 of reducing the amount of switch-port flaps and BGP session resets.
The delta check now also handles the case of fixed speed and duplex settings.
|
|
The speend and duplex settings should only be changed when they need to.
Always configuring this setting will make the kernel disable and re-enable the
physical interface. This will not only let the switchport flap but it will also
reset e.g. BGP sessions.
This is the first part of this fix for speed/duplex auto settings.
In addition - this also reduces the config commit time.
|
|
The flow control settings should only be changed when they need to. If flow
control is altered, the kernel will disable and re-enable the interface. This
will not only let the switchport flap but it will also reset e.g. BGP
sessions.
In addition - this also reduces the config commit time.
|
|
|
|
* 'current' of github.com:vyos/vyos-1x:
ddclient: T1789: fix RFC2136 generated config
T1774: fix error output
Python/ifconfig: T1557: do not allow both IPv4 and dhcp address on interfaces
list_interfaces: add wifi interfaces to bridgeable interfaces
|
|
|
|
|
|
* 'current' of github.com:vyos/vyos-1x:
[conf completion]: T1779: Add tunnels to completion
[XML templates] T1772: Changed old hacks to proper regex, according to the fix
Add a function for retrieving config dicts.
snmp: make script extension code more readable
snmp: use proper stat literals on chmod()
snmp: fix verify() indent on script extensions
snmp: fix verify() bail out early order
snmp: T1738: cleanup import statements
T1759: Fixing dependency bug from previous commit
T1773, T1774: add a show config operation with JSON and raw options.
T1759: Merging interface.py into ifconfig.py
Allow list arguments in the vyos.config show_config() function.
Replace the try and wait for segfault approach with explicit inSession check.
T1773: add a script for converting the config to JSON. It also exposes those functions in vyos.configtree
[XML templates] T1772: Add escaping of `\` symbol in `<regex>`
|
|
|
|
T1759: Merging interface.py into ifconfig.py
|
|
|
|
|
|
|
|
|
|
It also exposes those functions in vyos.configtree
|
|
* 'current' of github.com:vyos/vyos-1x:
snmp: T1769: remove TSM (Transport Security Mode) support
snmp: T818: T1738: remove per user/trap engine id
T1759: ioctl.pm/interface.pm rewrite
|