| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Certain NICs seem to fail to report that they don't support speed/duplex setting,
so they look as if it's supported, but the command fails in practice.
It's probably better to preserve a working config in that case.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If we have link-local static address and vrf, for example:
set interfaces ethernet eth2 address 'fe80::5200:ff:fe55:222/64'
set interfaces ethernet eth2 vrf 'foo'
This IPv6 address was assigned before vrf, as result after
attaching the intreface to vrf we lose this static linklocal
address
DEBUG/IFCONFIG cmd 'ip addr add fe80::5200:ff:fe55:222/64 dev eth2'
DEBUG/IFCONFIG cmd 'ip link set dev eth2 master foo'
DEBUG/IFCONFIG cmd 'ip addr add fe80::5208:ff:fe13:2/64 dev eth2'
This commit fixes this, the address is assigned after vrf assign
|
|
|
|
not none
We have a lot of boiler plate template code like
{% if config.interface is defined and config.interface.remote_as is defined
and config.interface.remote_as is not none %}
...
{% endif %}
This can be stripped down using a custom test to:
{% if config.interface.remote_as is vyos_defined %}
...
{% endif %}
In addition the new vyos_defined test supports comparison
{% if foo.bar.baz is vyos_defined('zoo') %}
...
{% endif %}
So the above will only evaluate to true if the variable foo.bar.baz is defined
and its content is zoo
This is inspired from https://github.com/aristanetworks/ansible-avd/ which make
heavy use of it.
All new templates should be written in this new style.
|
|
This extends the fix from 53e20097 ("vyos.ifconfig: T4330: bugfix changing MTU
when IPv6 is disabled") by ordering the execution in a way the Kernel does not
complain.
|
|
Commit f8b3d8999c ("ipv6: T4319: do not configure IPv6 related settings if it's
disabled") moved the MTU configuration part under the code path which is only
run if IPv6 is enabled on the system.
This prevented MTU changes on IPv6 disabled systems.
|
|
|
|
|
|
|
|
|
|
|
|
Commit 1bfe09f9 ("vyos.validate: T4321: make is_intf_addr_assigned() VRF aware")
added VRF support for an interface bound function. As an interface can only be
bound to one VRF check makes less sense.
This commit moves the VRF awareness from is_intf_addr_assigned() to
is_addr_assigned() so we check the VRF assignment even prior of calling
is_intf_addr_assigned() and fail fast.
|
|
|
|
|
|
|
|
|
|
|
|
The iavf, ice, and i40e drivers do not support speed, flow, or duplex control using ethtool.
As a result, interface configuration changes fail to commit when using those drivers.
This patch fixes that by correctly marking those drivers as not supporting those controls.
|
|
This reverts commit 534f677d36285863decb2cdff179687b4fd690cb.
Revert while investigating failure in vyos-configtest.
|
|
This reverts commit c4d389488970c8510200cac96a67182e9333b891.
Revert while investigating failure in vyos-configtest.
|
|
|
|
|
|
Commit 0e23fc10 ("interface: T4203: switch to new recursive node_changed()
implementation") switched to a new implementation to retrieve nested changes
under a CLI node. Unfortunately the new API was not called - instead the
old one was used.
|
|
|
|
Add support for the configtree diff algorithm. A new function
ConfigDiff().is_node_changed(path) -> bool
is added to recursively detect changes in the tree below the node at
path; existing functions take the keyword argument 'recursive: bool' to
apply the algorithm in place of the existing, non-recursive, comparison.
|
|
The DiffTree class maintains both the 'sub'(-tract) configtree,
containing all paths in the LHS of the comparison that are not in the
RHS, and the 'delete' configtree: the delete tree is the minimal subtree
containing only the first node of a path not present in the RHS. It is
the delete tree that is needed to produce 'delete' commands for config
mode, whereas the 'sub' tree contains full information, needed for
recursively detecting changes to a node.
|
|
|
|
The return value of diff_tree is now a single config_tree, with initial
children of names: ["add", "delete", "inter"] containing the config
sub-trees of added paths; deleted paths; and intersection, respectively.
The simplifies dumping to json, and checking existence of paths, hence,
of node changes.
|
|
|
|
If a valueLess node is added or removed from the CLI, a call to
leaf_node_changed() will not detect it.
If node is valueLess, on change old or new (depending on addition or deletion)
will be {} and is treated as None.
Add handler for this special case where old or new is an instance of a
dictionary but empty.
|
|
|
|
|
|
VXLAN does support using multiple remotes but VyOS does not. Add the ability
to set multiple remotes and add their flood lists using "bridge" command.
|
|
Commit 05aa22dc ("protocols: static: T3680: do not delete DHCP received routes")
added a bug whenever a static route is modified - the DHCP interface will
always end up with metric 210 - if there was a default route over a DHCP
interface.
|
|
In the past whenever a change happened to any interface and it was configured
as a DHCP client, VyOS always had a breif outage as DHCP released the old lease
and re-aquired a new one - bad!
This commit changes the behavior that DHCP client is only restarted if any one
of the possible options one can set for DHCP client under the "dhcp-options"
node is altered.
|
|
files
This commit updates the eapol code so that it writes the full
certificate chains for both the specified CA and the client certificate
to `<iface>_ca.pem` and `<iface>_cert.pem`, respectively.
The full CA chain is necessary for validating the incoming server
certificate when it is signed by an intermediate CA and the
intermediate CA cert is not included in the EAP-TLS ServerHello. In this
scenario, wpa_supplicant needs to have both the intermediate CA and the
root CA in its `ca_file`.
Similarly, the full client certificate chain is needed when the ISP
expects/requires that the client (wpa_supplicant) sends the client cert
+ the intermediate CA (or even + the root CA) as part of the EAP-TLS
ClientHello.
Signed-off-by: Andrew Gunnerson <chillermillerlong@hotmail.com>
|
|
|
|
|
|
Add smoketest to catch updates to a component version in legacy
curver_DATA that is not present in xml syntaxVersion.
|
|
Add the include files containing the syntaxVersion element defining the
version of the respective component; these files are included by the top
level file 'xml-component-versions.xml.in'. Processing of these elements
was previously added to the python xml lib in commit 40f5359d. This will
replace the use of 'curver_DATA' in vyatta-cfg-system and other legacy
packages.
|
|
VLAN isolation can not be "set" when interface is of type wifi.
|
|
This commit fixes a small typo where the client cert name was being used
to index the CA configuration dict.
Signed-off-by: Andrew Gunnerson <chillermillerlong@hotmail.com>
|
|
|
