summaryrefslogtreecommitdiff
path: root/python
AgeCommit message (Collapse)Author
2020-10-03vyos.xml: T2956: add support for list of defaultValuesChristian Poessinger
Sometimes (PPPoE server is one of them) a simple defaultValue in the XML is not enough - several values should be set. In order to support a list of defaultValues you can now simply list them as a whitespace separated string. Example: <defaultValue>pap chap mschap mschap-v2</defaultValue> will generate a Python list ['pap', 'chap', 'mschap', 'mschap-v2'] when retrieved by vyos.xml.defaults()
2020-10-01vlan: configdict: T2945: determine if vlan is part of bridgeChristian Poessinger
Every interface knows if it is part of a bridge or not - except a VLAN (VIF) interface. Also VLANs should be aware of its master bridge. Add a testcase to ensure when VIFs on an interface change the bridge does not loos one of it's members.
2020-10-01configdict: T2372: use config.exists() when probing for interface removalChristian Poessinger
We must use exists() as get_config_dict() will always return {} - even when an empty interface node like +macsec macsec1 { +} exists.
2020-09-26ifconfig: mtu: disallow MTU < 1280 bytes when IPv6 is enabled on the interfaceChristian Poessinger
Using an MTU less then the required 1280 bytes (as per RFC) on an interface where IPv6 is not explicitly disabled by: - set interfaces ethernet eth1 ipv6 address no-default-link-local - not having any other IPv6 address configured Will now trigger a commit error via verify() instead of raising FileNotFoundError!
2020-09-25ifconfig: T2912: add helper to verify interface min/max supported MTUChristian Poessinger
Currently the MTU size of an interface is only checked when entered via CLI but if the interface supportes the configured MTU at all is not verified at all. New helper functions get_min_mtu(), get_max_mtu() and verify_mtu() have been added to provide a central API for validation.
2020-09-25ifconfig: T2653: get_mtu() should return int() for easier comparisonChristian Poessinger
2020-09-25ifconfig: T2912: add helper to retrieve interface min/max supported MTUChristian Poessinger
>>> from vyos.ifconfig import Interface >>> tmp=Interface('eth0') >>> tmp.get_min_mtu() 60 >>> tmp.get_max_mtu() 9000
2020-09-24dhcpv6-pd: verify: T2923: interface is required where the prefix is assignedChristian Poessinger
When configuring DHCPv6-PD it is mandatory to also specify at least one interface where the newly delegated prefix will be used. Without this setting DHCPv6-PD makes no sense at all.
2020-09-24wireless: T2241: add "wds" CLI optionChristian Poessinger
2020-09-22ifconfig: T2653: bond: bridge: ensure member interface is not a source-interfaceChristian Poessinger
As we already check that a bond/bridge member interface is not a member of any other bridge or bond, the check must be extended. We also need to ensure that the bond member interface is not used as a source-interface to pppoe, macsec, tunnel, pseudo-ethernet, vxlan interfaces.
2020-09-22ifconfig: T2653: move is_member() from vyos.vylidate to vyos.configdictChristian Poessinger
2020-09-21bridge: ifconfig: T2653: only delete member interfaces which still existChristian Poessinger
When removing e.g. a macsec interface and also its associated member interface from the bridge, it will happen that the macsec interface instance is long gone before we reach the code in the bridge interface which will remove it from the bridge itself. When this is the case, we can not call BridgeIf.del_port() as it will throw an exception that the interface does not exist. We now only remove a bridge member if the interface in question is still available in the kernel.
2020-09-20ifconfig: T2653: remove duplicates of get_config()Christian Poessinger
A lot of derived classes from Interface implemented their own get_config() method which more or less was the same everywhere. We also hat different qualifiers like @staticmethod or @classmethod. This is now changed to only have the @classmethod in Interface base class which will return the necessary dictionary keys for the required interfaces. This change is a mid reduction in lines of code which is always a very nice thing!
2020-09-20vif-s: ifconfig: T2903: use explicit VLAN protocol over raw numbersChristian Poessinger
In the past we had to provide the ethertype value used for the VLAN protocol (0x88A8 -> 802.1ad or 0x8100 -> 802.1q). This should be changed to a more user friendly CLI node (protocol over ethertype) and 802.1ad over it's raw value 0x88A8. There is no need in presenting RAW information from the ethernet header to the user. Also iproute2 calls it protocol which makes way more sense over the "raw" value.
2020-09-20vyos.configdict: T2665: cleanup get_interface_dict() default dict handlingChristian Poessinger
2020-09-19wifi: ifconfig: T2875: add_to_bridge() must be called after starting servicesChristian Poessinger
hostapd/wpa_supplicant will control the admin state of an interface, thus we should re-add it to a bridge after we have launched those services.
2020-09-19ifconfig: T2653: cleanup VLAN interface commentsChristian Poessinger
2020-09-19ifconfig: T2653: convert VLAN interfaces do discrete classChristian Poessinger
Instead of using an Adapter pattern to make interfaces VLAN-aware, create a derived class named VLANIf to represent a VLAN. This change was necessary to eliminate mixed code in Interfaces class which was VLAN - free, but recently gained some VLAN specific code for set_admin_state(). In addition this "autoresolves" the issue in T2894 as a bond vlan interface will no longer change the lower interface.
2020-09-17ethernet: T2891: Add ethernet ring-buffer CLI commandsDmitriyEshenko
2020-09-15bonding: T2515: preserve interface admin state when removing from bondChristian Poessinger
Removing a member from a bond/LACP will turn the physical interface always in admin-down state. This is invalid, the interface should be placed into the state configured on the VyOS CLI. Smoketest on bond interfaces is extended to check this behavior.
2020-09-15vyos.configdict: T2515: leaf_node_changed() should return list or NoneChristian Poessinger
2020-09-13bonding: T2877: support configuration of minimum number of active linksChristian Poessinger
Specifies the minimum number of links that must be active before asserting carrier. It is similar to the Cisco EtherChannel min-links feature. This allows setting the minimum number of member ports that must be up (link-up state) before marking the bond device as up (carrier on). This is useful for situations where higher level services such as clustering want to ensure a minimum number of low bandwidth links are active before switchover. This option only affects 802.3ad mode. The default value is 0. This will cause carrier to be asserted (for 802.3ad mode) whenever there is an active aggregator, regardless of the number of available links in that aggregator. Note that, because an aggregator cannot be active without at least one available link, setting this option to 0 or to 1 has the exact same effect.
2020-09-13vyos.util: add missing ConfigError import in check_kmod()Christian Poessinger
2020-09-13ifconfig: T2863: only use IPv6 link-local address if interface has MAC addressChristian Poessinger
With VyOS 1.2 the default WireGuard behavior is used. This means that when a WireGuard interface is added to the system, there is no "MAC" address - also there is no IPv6 link-local address assigned by the Kernel to this particular interface. With implementation of T2653 all interfaces now receive an IPv6 address - which is also valid for WireGuard interfaces - unfortunately this logic relies on the interface MAC address - and as there is none, the link-local address will be always the same. The logic behind is coded here [1]. We generate an IPv6 link-local address even when there is no "MAC" address. The behavior/functionality (as with VyOS 1.2) must be restored to not have a link-local IPv6 address at all. Any user can add any IPv6 link-local address manually by issuing: set interfaces wireguard wg01 address fe80::ff:1/64. Change vyos.ifconfig.add_ipv6_eui64_address to only add the EUI64-based link-local address if a MAC address is available. [1] https://github.com/vyos/vyos-1x/blob/3077158391ceee4ce04c27dec33f629529727c36/python/vyos/ifconfig/interface.py#L468
2020-09-01xml: T2849: vyos.xml.defaults should return a list on multi nodesJohn Estabrook
2020-08-31T2636: remove workarounds for get_config_dict()Christian Poessinger
Now that b40c52682a256 ("config: T2636: get_config_dict() returns a list on multi node by default") is implemented the workarounds can be removed.
2020-08-31configd: T2582: inject shim env variable into configsessionJohn Estabrook
ConfigSession needs to have required env vars manully injected; add the shim definition env var to the list, if config daemon is active.
2020-08-30config: T2636: get_config_dict() returns a list on multi node by defaultJohn Estabrook
Unless no_multi_convert is True, a single valued multi node will be returned as a list by get_config_dict(). Modification of Thomas Mangin's version.
2020-08-25T2826: frr: frr python lib error in replace_sectionRunar Borge
because of a bug in frr.py the default before_re will not be working. it is by default without a group, but will be used in a match that needs a group. The whole string could be matched in the group, so the fix is easy to implement.
2020-08-23T2755: convert jmespath.search() to vyos_dict_search() for performanceChristian Poessinger
2020-08-23vyos.configverify: T2677: extend verify_dhcpv6() for non duplicate sla-idsChristian Poessinger
2020-08-23vyos.util: T2755: add vyos_dict_search() to traverse a dictionaryChristian Poessinger
This is faster implementation then using jmespath.search('foo.bar', dict).
2020-08-23wireless: T2057: ensure interface state is properly setChristian Poessinger
2020-08-23ifconfig: vxlan: geneve: T2823: properly set interface stateChristian Poessinger
2020-08-23Revert "ifconfig: T2653: drop unused vyos.ifconfig.pppoe"Christian Poessinger
This reverts commit 5a5974d5a00b482cabd3dee92bc365d3c9f399bc. Required for operational mode "show interfaces" command.
2020-08-23dhcpv6-pd: T2821: support dhcpv6-pd without "address dhcpv6"Christian Poessinger
Currently DHCPv6-PD requires an interface address configured to dhcpv6 on the CLI. This is not required also sometimes there is either no dhcpv6 interface addressing available (PPPoE) or wanted. This limitation was artificial due to the old interface code. Change the implementation to spawn the DHCPv6 client and request a prefix even when there is no address request configured.
2020-08-22ifconfig: T2653: drop unused vyos.ifconfig.pppoeChristian Poessinger
2020-08-22dhcpv6-pd: T2677: optimize CLI interface for PD configurationChristian Poessinger
The current CLI did not support multiple prefix-delegations per interface. Some ISPs only send one /64 to a client per prefix-delegation request, but they allow the customer to request multiple prefixes. The 'dhcpv6-options prefix-delegation' node has been renamed and converted to a tag node named 'dhcpv6-options pd'. The tag node specifies a PD request (>=0). In the past the user needed to know what prefix will be assigned and required to calculate the sla-len by himself. The 'sla-len' node was dropped and is now calculated in the background from the 'dhcpv6-options pd 0 length' node. It is no longer mandatory to supply the 'sla-id' node, if sla-id is not specified it is 'guessed' by counting upwards. Example configuration: ---------------------- ethernet eth1 { address dhcpv6 dhcpv6-options { pd 0 { length 56 interface eth2 { address 1 } } } } This will request a /56 assignment from the ISP and will delegate a /64 network to interface eth2. VyOS will use the interface address ::1 on the delegate interface (eth2) as its local address.
2020-08-20VRRP: T2761: Extend "show vrrp" op-mode command with router priorityerkin
2020-08-19certbot: T2815: change config dir to /config/auth/letsencryptJohn Estabrook
2020-08-18ifconfig: T2653: bugfix when removing DHCP addressChristian Poessinger
DHCP service was not stopped when an DHCP address got removed from the interface. DHCP service is now always stopped if it is not configured explicitly.
2020-08-16Merge pull request #510 from efficiosoft/vyos_template_rewriteChristian Poessinger
vyos.template: T2720: Rework vyos.template Python library
2020-08-15Merge branch 't2564-lcd' of github.com:c-po/vyos-1x into currentChristian Poessinger
* 't2564-lcd' of github.com:c-po/vyos-1x: lcd: T2564: flatten CLI interface system display: T2564: Added test model system display: T2564: Dictionary code update system display: T2564: Conf files to /run system display: T2564: Changed "duration" to "time" system display: T2564: py code cleanup system display: T2564: Replace "config (enabled|disabled)" with "display disabled" system display: T2564: Lowercase model names system display: T2564 Extend VyOS to support appliance LCDs
2020-08-15vyos.configverify: no need to call .keys() when searching dictChristian Poessinger
2020-08-15vyos.configdict: keep is_member import as local as possibleChristian Poessinger
2020-08-15lcd: T2564: flatten CLI interfaceChristian Poessinger
* set system lcd device <device> * set system lcd model <modeml> Both device and model have completion helpers for supported interfaces and LCD displays.
2020-08-13ifconfig: dhcp: fix ModuleNotFoundError: No module named 'vyos.ifconfig.dhcp'Christian Poessinger
Commit 21bc98f1 ("ifconfig: dhcp: T2767: client must not start when interface is disabled") dropped the vyos.ifconfig.dhcp module but not removed it from the modules import list.
2020-08-12ifconfig: dhcp: T2767: client must not start when interface is disabledChristian Poessinger
ISC DHCP client will always place an Interface in admin-up state once it is started. We must ensure that if an interface is placed in A/D state that the DHCP client proccess is not launched and terminated if it is running.
2020-08-08http api: T1431: update args of call to install-imageJohn Estabrook
commit 3f8884587 added an endpoint for image management; T2753 updated the command line options. Make script call consistent.
2020-08-04dhcpv6-pd: T2741: support delegation on non existing interfacesChristian Poessinger
We must ignore any return code when invoking dhcpc6 initially. This is required to enable DHCPv6-PD for interfaces which are yet not up and running and my be started later by VyOS.