summaryrefslogtreecommitdiff
path: root/python
AgeCommit message (Collapse)Author
2019-12-06ifconfig: T1849: fix DHCPv6 startupChristian Poessinger
2019-12-06Python/VyOS validate: T1849: handle is_ipv6()/is_ipv6() exceptionsChristian Poessinger
2019-12-06ifconfig: T1793: remove dhcpv6 client debug outputChristian Poessinger
2019-12-04[vyos.config] T1847: correctly set_level for path given as empty stringJohn Estabrook
2019-12-03T1801: move escaping of backslashes into configtreeJohn Estabrook
2019-11-25T1824: restore original umaskJohn Estabrook
2019-11-25T1824: set write permissions for cfg_group on vyos-migrate.logJohn Estabrook
2019-11-24geneve: T1799: add Generic Network Virtualization EncapsulationChristian Poessinger
2019-11-21T1818: Print name of migration script on failureJohn Estabrook
2019-11-21T1814: Add log of migration scripts run during config migrationJohn Estabrook
2019-11-17T1801: escape isolated backslashes before passing to ConfigTree()John Estabrook
2019-11-11ifconfig: T1793: extend set_speed_duplex() delta checkChristian Poessinger
Commit 9e4947770064 ("ifconfig: T1793: add delta check on set_speed_duplex()") was wave1 of reducing the amount of switch-port flaps and BGP session resets. The delta check now also handles the case of fixed speed and duplex settings.
2019-11-10ifconfig: T1793: add delta check on set_speed_duplex()Christian Poessinger
The speend and duplex settings should only be changed when they need to. Always configuring this setting will make the kernel disable and re-enable the physical interface. This will not only let the switchport flap but it will also reset e.g. BGP sessions. This is the first part of this fix for speed/duplex auto settings. In addition - this also reduces the config commit time.
2019-11-10ifconfig: T1793: add delta check on set_flow_control()Christian Poessinger
The flow control settings should only be changed when they need to. If flow control is altered, the kernel will disable and re-enable the interface. This will not only let the switchport flap but it will also reset e.g. BGP sessions. In addition - this also reduces the config commit time.
2019-11-10Python/ifconfig: wireguard: remove trailing whitespacesChristian Poessinger
2019-11-04Python/ifconfig: T1557: do not allow both IPv4 and dhcp address on interfacesChristian Poessinger
2019-11-04list_interfaces: add wifi interfaces to bridgeable interfacesChristian Poessinger
2019-10-28Add a function for retrieving config dicts.Daniil Baturin
2019-10-27Merge pull request #155 from kroy-the-rabbit/py-interfaceChristian Poessinger
T1759: Merging interface.py into ifconfig.py
2019-10-27T1759: Fixing dependency bug from previous commitkroy
2019-10-27T1759: Merging interface.py into ifconfig.pykroy
2019-10-27Allow list arguments in the vyos.config show_config() function.Daniil Baturin
2019-10-27Replace the try and wait for segfault approach with explicit inSession check.Daniil Baturin
2019-10-27T1773: add a script for converting the config to JSON.Daniil Baturin
It also exposes those functions in vyos.configtree
2019-10-24T1759: ioctl.pm/interface.pm rewritekroy
2019-10-24T1762: adjust the set_level() calls to use the new list representation.Daniil Baturin
2019-10-24[vyos.config] T1764: support both string and list arguments in config functions.Daniil Baturin
2019-10-23Merge pull request #152 from kroy-the-rabbit/intf-rewrite1bfhagbard-01
T1759: bug fixes, missing interface IP
2019-10-23T1759: bug fixes, missing interface IPkroy
2019-10-23Merge branch 'current' of https://github.com/vyos/vyos-1x into currentDaniil Baturin
2019-10-23[vyos.config] T1758: use vyos.configtree for reading values,Daniil Baturin
instead of calling cli-shell-api.
2019-10-23[HTTP API] Add endpoints for config file and image management.Daniil Baturin
2019-10-23[vyos.config] T1758: check that config setup has completed beforeJohn Estabrook
calling showConfig, else, default to config.boot
2019-10-22T1759: Migrating interfaceskroy
2019-10-18Python/ifconfig: T1712: always start DHCP when configuredChristian Poessinger
DHCP was only started when the interface operstate was set to up but this is wrong. An interface can be configured as DHCP interface and DHCP client must be launched even when the physical interface becomes available n-minutes later. DHCP client then can ask for an IP assignemnt by DHCP. Tested by starting DHCP client on a not connected ethernet interface. Address was assigned later on after link became ready.
2019-10-18Python/ifconfig: T1557: get_status() must use admin state not operstateChristian Poessinger
2019-10-16Revert "Python/ifconfig: T1712: wait when changing interface state"Christian Poessinger
This reverts commit 1257d7851866d42287018b38dd871f279b87286a. It will delay network interface configuration everywhere when e.g. no network cable is plugged in. We should find the root cause why DHCPd sometimes did not start.
2019-10-13Python/ifconfig: T1557: add support for DHCPv6 client optionsChristian Poessinger
2019-10-13Python/ifconfig: T1557: bugfix when configuring accept_ra on VLAN interfacesChristian Poessinger
2019-10-11Python/ifconfig: T1723: add flag to specify if we should wait for interface upChristian Poessinger
2019-10-09T1430: add dhcp vendor-class-id client optionChristian Poessinger
2019-10-09Python/ifconfig: T1557: add generic support for DHCP client optionsChristian Poessinger
2019-10-06Python/ifconfig: T1712: wait when changing interface stateChristian Poessinger
With some interfaces, for example bond vif, it take some time for the state change to really happen. Because of this later code, like starting DHCP client, might not work as expected as get_state() reports the old (real) state. Now when changing state of an interface we are (busy-)waiting up to 12.5 seconds before we inform the user that the interface could not be brought up. This should be more then enough time for any interface to start except when there is really no cable attached.
2019-10-06Python/ifconfig: T1557: add return in front of self._cmd() callsChristian Poessinger
2019-10-01T1424: Check for http error or redirect, when loading remote files.John Estabrook
(ported from vyatta-cfg f051e369)
2019-09-24Python/ifconfig: T1557: add STPIf class (spanning tree) bridge memberChristian Poessinger
2019-09-24Python/ifconfig: T1557: bugfix removing Q-in-Q VLAN interfacesChristian Poessinger
VLAN interfaces have not been removed "in order". What does it mean? We need to delete Q-in-Q interfaces prior to deleting the underlaying VLAN interface (vif-s). This was not the case and that triggered an exception that a non existing interface was about to be removed. Tested using adding and deleting the following config: set interfaces ethernet eth2 address 192.0.2.1/24 set interfaces ethernet eth2 description "VyOS bonding" set interfaces ethernet eth2 disable-link-detect set interfaces ethernet eth2 mac 00:91:00:00:00:01 set interfaces ethernet eth2 mtu 9000 set interfaces ethernet eth2 vif-s 100 address 192.168.10.1/24 set interfaces ethernet eth2 vif-s 100 description "802.1ad service VLAN 100" set interfaces ethernet eth2 vif-s 100 mtu 1500 set interfaces ethernet eth2 vif-s 100 mac 00:91:00:00:00:02 set interfaces ethernet eth2 vif-s 100 vif-c 110 address "192.168.110.1/24" set interfaces ethernet eth2 vif-s 100 vif-c 110 description "client VLAN 110" set interfaces ethernet eth2 vif-s 100 vif-c 120 address "192.168.120.1/24" set interfaces ethernet eth2 vif-s 100 vif-c 120 description "client VLAN 120" set interfaces ethernet eth2 vif-s 100 vif-c 130 address "192.168.130.1/24" set interfaces ethernet eth2 vif-s 100 vif-c 130 description "client VLAN 130" set interfaces ethernet eth2 vif 400 address 192.168.40.1/24 set interfaces ethernet eth2 vif 400 description "802.1q VLAN 400" set interfaces ethernet eth2 vif 400 mtu 1500 set interfaces ethernet eth2 vif 400 mac 00:91:00:00:00:03
2019-09-24Python/ifconfig: T1557: refactor BondIf 'mode' property to set_mode()Christian Poessinger
2019-09-24Python/ifconfig: T1557: refactor BondIf 'arp_interval' property to ↵Christian Poessinger
set_arp_interval()
2019-09-24Python/ifconfig: T1557: refactor BondIf 'arp_ip_target' property to ↵Christian Poessinger
set_arp_ip_target()/get_arp_ip_target()
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-21 21:23:59 +0000