| Age | Commit message (Collapse) | Author |
|---|
|
Fixed unconfigured redistribution of nhrp into ospf.
|
|
Add common IPv6 CLI option (use ethernet as example):
set interfaces ethernet eth0 ipv6 address interface-identifier
Co-authored-by: Christian Breunig <christian@breunig.cc>
|
|
|
|
grub: T7327: honor "system option kernel" settings during image upgrade
|
|
When performing an image upgrade and Linux Kernel command-line option that
should be passed via GRUB to the Linux Kernel are missing on the first boot.
This is because when generating the GRUB command-line via the op-mode scripts
the CLI nodes defining the options are not honored.
This commit re-implements the code-path in op-mode which generates the strings
passed via GRUB to the Linux Kernel command-line.
NOTE: If (for a yet unknown reason) a Kernel command-line option string changes
during a major - or minor - upgrade of the Linux Kernel, we will need to adapt
that logic and possibly call a helper from within the NEW updated image rootfs.
Thus we can ship future information back into the past like the "Grays Sports
Almanac" from Back to the Future Part II.
|
|
kea: T7281: Add ping-check, use built-in option for classless static routes
|
|
T7321: Replace legacy operations in configsession.py with vyconf client operations
|
|
* dhcp-server: T7310: add support for option 138 CAPWAP AC to KEA
* kea: T7310: Update data/templates/dhcp-server/kea-dhcp4.conf.j2
Co-authored-by: Simon <965089+sarthurdev@users.noreply.github.com>
* kea: T7310: Update python/vyos/kea.py
Co-authored-by: Simon <965089+sarthurdev@users.noreply.github.com>
* kea: T7310: add smoketest for capwap-ac-v4
* kea: T7310: Update python/vyos/kea.py
Co-authored-by: Simon <965089+sarthurdev@users.noreply.github.com>
---------
Co-authored-by: David Vølker <davvol@davvol.dk>
Co-authored-by: Simon <965089+sarthurdev@users.noreply.github.com>
|
|
|
|
Remove legacy windows static route on option 249
|
|
|
|
|
|
Encapsulation of standard config session functions, to replace legacy
versions in configsession.py.
|
|
|
|
|
|
|
|
Fix indentation error in get_vlans_ids_and_range function.
|
|
Allowed VLAN ranges are unnecessarily deconstructed into individual vlans, and then added one by one to the bridge. This can take a long time if a large range like 1-4084 is used.
- python/vyos/configdict.py - Added get_vlans_ids_and_range function to return configured ranges
- python/vyos/ifconfig/bridge.py - Modified add and delete vlan section to not loop unnecessarily
|
|
|
|
|
|
New CLI
```
set vpp nat44 static rule 10 outside-interface 'eth0'
set vpp nat44 static rule 10 inside-interface 'eth1'
set vpp nat44 static rule 10 external address 192.168.122.10
set vpp nat44 static rule 10 external port 6545 # optional
set vpp nat44 static rule 10 protocol tcp|udp|icmp|all # optional, defaults to "all"
set vpp nat44 static rule 10 local address 100.64.0.10
set vpp nat44 static rule 10 local port 64010 # optional
```
|
|
T7292: add Python module client library for vyconfd
|
|
|
|
Working on T7273 revealed that when committing the following CLI config
"set interfaces vxlan vxlan0 parameters neighbor-suppress" the CLI level
queried via conf.get_level() was at ['interfaces', 'vxlan'].
This had the side effect that queries on the configuration like:
conf.exists(['protocols', 'bgp']) returned False, as it would look accidently
at the level: ['interfaces', 'vxlan', 'protocols', 'bgp']
This error was there from the beginning of the FRRender class implementation.
|
|
|
|
|
|
|
|
* T7283: VPP add static NAT support
Add static mapping NAT implementation
```
set vpp nat44 static rule 10 outbound-interface 'eth0'
set vpp nat44 static rule 10 inbound-interface 'eth1'
set vpp nat44 static rule 10 destination address 192.168.122.10 # optional, if not set outbound interface ip address is used
set vpp nat44 static rule 10 destination port 6545 # optional
set vpp nat44 static rule 10 protocol tcp|udp|icmp|all # optional, defaults to "all"
set vpp nat44 static rule 10 translation address 100.64.0.10
set vpp nat44 static rule 10 translation port 64010 # optional
```
* Improve help strings (Daniil Baturin)
---------
Co-authored-by: Daniil Baturin <daniil@baturin.org>
|
|
|
|
T7278: Remove cracklib hack from postconfig script template
|
|
|
|
|
|
T7189: VPP source of the tunnel interface should be checked and configured
|
|
Previously the parser would ignore lines beginning with '//', however
this is unnecessarily restrictive. Pass only config information to
parser, as the version string is saved separately for reconstruction on
render.
|
|
T7181: VPP add initial source NAT implentation
|
|
T7121: Set up communication vyconfd to vyos-commitd
|
|
|
|
|
|
The vyconfd configuration file contains socket name, canonical
directories, and file names shared with vyos-commitd.
|
|
|
|
The internal cache is used as a faster replacement to parsing the active
and proposed configs on initialization of a commit session.
|
|
|
|
|
|
Changed priority for VPP interfaces: all VPP interfaces must be configured after Ethernet interfaces
|
|
libvyosconfig is both a build and a run dependency of vyos-1x.
Satisfying the build dependency within the Docker image requires
coordination of updates to vyos-build/libvyosconfig/vyos-1x on any
changes to the library; simplify this process by moving the build to a
step of the vyos-1x Makefile.
|
|
This reverts commit bb70ea569f4548b103c54bbb7c393221a6da0a23.
|
|
T6948: Keep DHCP server leases in sync with hostd records
|
|
Allow to configure VPP loopback interface as BVI interface
In the VPP a bridge-domain is the L2 bridge and does not have
its own interface
Loopback is required if we want to ping from/to the bridge.
```
set vpp interfaces bridge br10 member interface lo23 bvi
```
|
|
T7171: Add dstport option to GENEVE tunnels
|
|
|
