| Age | Commit message (Collapse) | Author |
|---|
|
detachment
(cherry picked from commit 7dbd07657c914d5a46eed101ae44d73ba3b4c6f0)
|
|
Linux bridge uses EtherType 0x8100 by default. In some scenarios, an EtherType
value of 0x88A8 is required.
Reusing CLI command from VIF-S (QinQ) interfaces:
set interfaces bridge br0 protocol 802.1ad
|
|
This extends commit dbe8c613b ("bridge: T6043: do not call vxlan dependency if
interface does not exist (yet)") with a proper cleanup of additional interfaces
created during the testrun.
|
|
In order to keep the proper priority list during system startup and on initial
setup/commit for this feature the dependent VXLAN code should not be called,
if the interface in question does not exist (yet).
|
|
|
|
|
|
* T5195: move run, cmd, call, rc_cmd helper to vyos.utils.process
* T5195: use read_file and write_file implementation from vyos.utils.file
Changed code automatically using:
find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import read_file$/from vyos.utils.file import read_file/g' {} +
find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import write_file$/from vyos.utils.file import write_file/g' {} +
* T5195: move chmod* helpers to vyos.utils.permission
* T5195: use colon_separated_to_dict from vyos.utils.dict
* T5195: move is_systemd_service_* to vyos.utils.process
* T5195: fix boot issues with missing imports
* T5195: move dict_search_* helpers to vyos.utils.dict
* T5195: move network helpers to vyos.utils.network
* T5195: move commit_* helpers to vyos.utils.commit
* T5195: move user I/O helpers to vyos.utils.io
|
|
Current state of vyos-1x smoketests have hardcoded features to test. The
feature support is inside the base class BasicInterfaceTest
class BasicInterfaceTest:
class TestCase(VyOSUnitTestSHIM.TestCase):
_test_dhcp = False
_test_ip = False
_test_mtu = False
_test_vlan = False
_test_qinq = False
_test_ipv6 = False
_test_ipv6_pd = False
_test_ipv6_dhcpc6 = False
_test_mirror = False
All derived classes need to enable the tests that are supported on this
interface type. Adding new feature to a given interface (like vif support in
T5237) require manually enabling those tests for the given interface.
It would make much more sense, if we can query the config backend for supported
interface options - or in other words - is there a CLI node available that
corresponds to set interfaces ethernet <name> vif - if that's the case,
_test_vlan = True.
|
|
The VLAN aware bridge was forwarding traffic between member ports, but traffic
destined torwards the CPU was dropped. This resulted in a gateway not reachable
or DHCP leases that could not be handed out.
Tested via:
VyOS
set interfaces bridge br0 enable-vlan
set interfaces bridge br0 member interface eth1 allowed-vlan '10'
set interfaces bridge br0 member interface eth1 allowed-vlan '20'
set interfaces bridge br0 member interface eth1 allowed-vlan '30'
set interfaces bridge br0 member interface eth1 allowed-vlan '40'
set interfaces bridge br0 member interface eth1 native-vlan '40'
set interfaces bridge br0 member interface eth2 allowed-vlan '30'
set interfaces bridge br0 member interface eth2 allowed-vlan '20'
set interfaces bridge br0 member interface eth2 allowed-vlan '10'
set interfaces bridge br0 member interface eth2 allowed-vlan '40'
set interfaces bridge br0 vif 10 address '10.0.10.1/24'
set interfaces bridge br0 vif 20 address '10.0.20.1/24'
set interfaces bridge br0 vif 30 address '10.0.30.1/24'
set interfaces bridge br0 vif 40 address '10.0.40.1/24'
Arista vEOS
vlan 10,20,30,40
interface Ethernet1
switchport trunk allowed vlan 10,20,30,40
interface Vlan10
ip address 10.0.10.2/24
interface Vlan20
ip address 10.0.20.2/24
interface Vlan30
ip address 10.0.30.2/24
interface Vlan40
ip address 10.0.40.2/24
interface Ethernet1
switchport trunk allowed vlan 10,20,30,40
switchport mode trunk
spanning-tree portfast
Cisco vIOS
interface GigabitEthernet0/0
ip address 10.0.40.3 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/0.10
encapsulation dot1Q 10
ip address 10.0.10.3 255.255.255.0
!
interface GigabitEthernet0/0.20
encapsulation dot1Q 20
ip address 10.0.20.3 255.255.255.0
!
interface GigabitEthernet0/0.30
encapsulation dot1Q 30
ip address 10.0.30.3 255.255.255.0
!
|
|
aware bridge
|
|
|
|
|
|
|
|
We do not only provide DHCP functionality to ethernet interfaces, it's a common
feature so the testcase should be made available for multiple interface types.
|
|
interfaces
The MTU size of the source-interface must be greater or equal to the MTU of the
pseudo ethernet interface.
|
|
|
|
Private VLAN, also known as port isolation, is a technique in computer
networking where a VLAN contains switch ports that are restricted such that
they can only communicate with a given "uplink". The restricted ports are
called "private ports".
Each private VLAN typically contains many private ports, and a single uplink.
The uplink will typically be a port (or link aggregation group) connected to a
router, firewall, server, provider network, or similar central resource.
Q: https://en.wikipedia.org/wiki/Private_VLAN
|
|
Currently every smoketest does the setup and destruction of the configsession
on its own durin setUp(). This creates a lot of overhead and one configsession
should be re-used during execution of every smoketest script.
In addiion a test that failed will leaf the system in an unconsistent state.
For this reason before the test is executed we will save the running config
to /tmp and the will re-load the config after the test has passed, always
ensuring a clean environment for the next test.
|
|
Commit 49bc3f1e ("vif: T3349: use fixed ordering when enabling parent and child
interface") also shipped a smoketest to verify the functionality of the parent
admin up/down problematic from T3349. The generic testcase failed for the VLAN
aware bridge as vlan-awarenes was not turned on.
|
|
It does not make sense (at all!) to re-initialize the entire class with every
call to setUp(). We neither change the enabled/disabled tastcases dynamically,
not do we adjust the testinterfaces during a run.
Remove the runtime overhead and place one-time init calls into setUpClass()
instead.
|
|
|
|
In 558e1ca9, we found that the interface created by a test case was not
cleaned up completely, which led to the destruction of smoke test.
But in fact, the test case function retained an invalid deletion
configuration code. We added a repair patch and forgot to delete the invalid code.
Now we delete it
|
|
|
|
|
|
|
|
equipment
According to the consensus, the specific behavior of a VLAN aware bridge should conform
to the behavior of professional equipment. This commit makes a significant change to the
behavior of VLAN aware bridge, and has the following behaviors:
1. Disable `vif 1` configuration
2. When the VLAN aware bridge is enabled, the parent interface is always VLAN 1
3. When `native-vlan` is not configured, the default behavior of the device is `native-vlan 1`
4. The VLAN ids forwarded by the bridge are determined by `vif`
5. It has an `enable-vlan` node to enable VLAN awareness
6. VLAN configuration is allowed only when VLAN aware bridge is activated
|
|
|
|
|
|
|
|
Commit ef629504d4 ("smoketest: mirror: drop testcase") dropped the smoketests
entirely as they have been programmed in a wrong way leading to outages on live
development systems which used dummy interfaces for management traffic.
|
|
|
|
This reverts parts of commit c4048b2047f693436b38196632cddf65beb67a86 because
when tear-downing config session entire interface paths are removed with non
test related interface (all dummy interfaces) this breaks e.g. remote
connections when connected to one of the dummy interface IP addresses for
management.
|
|
Commit 29e32d39 ("smoketest: T1466: add eapol tests") renamed interface
methods of class BasicInterfaceTest, those change was not reflected in
every derived class.
|
|
|
|
|
|
|
|
|
|
In #601, I provided a basic patch. Under this patch, I rely on vif to
detect the vlan id range that the bridge should flow through,
which may lead to greater redundancy in the configuration,
so I am considering detecting effective vlan filters In setting the range
of vlan id that is required to flow through the bridge,
I use set() to complete the deduplication of this vlan id
and set it to the bridge uniformly (at the same time,
I slightly modified the smoke test script)
|
|
|
|
Every interface knows if it is part of a bridge or not - except a VLAN (VIF)
interface. Also VLANs should be aware of its master bridge.
Add a testcase to ensure when VIFs on an interface change the bridge does not
loos one of it's members.
|
|
vyos-smoketest-integration (T2832)
* 'master' of github.com:vyos/vyos-smoketest: (153 commits)
pppoe-server: test some more values
lcd: adjust to cli changes
lcd: adapt test to new CLI design
pppoe-server: initial smoketest with local and radius auth
pppoe: validate dhcpv6 client will be started
wireless: validate hostapd/wpa_supplicant is running
pppoe: sync to new dhcpv6-pd cli
anyconnect: T2812: add basic testing
ethernet: check interface disable state
router-advert: check 'infinity' option in script logic
ssh: config file is now volatile (moved to /run)
ipv6: link-local: test address assignment on interfaces
router-advert: add initial test
mdns-repeater: add basic test
pseudo-ethernet: extend smoketests with VIFs
l2tpv3: add initial interface test
wireless: use library function for loading kernel modules
ethernet: test "ip" subtree of interface for e.g. ARP settings
pppoe: use assertEqual()
service: bcast-relay: add initial tests
...
|
