summaryrefslogtreecommitdiff
path: root/smoketest/scripts/cli
AgeCommit message (Collapse)Author
2023-10-21T5667: BGP label-uniscat enable ecmpfett0
(cherry picked from commit e7cdf855ddce7dfe45af8b4b75eeee9de09f2451)
2023-10-11T5165: Implement policy local-route source and destination portViacheslav Hletenko
Add `policy local-route` source and destination port set policy local-route rule 23 destination port '222' set policy local-route rule 23 protocol 'tcp' set policy local-route rule 23 set table '123' set policy local-route rule 23 source port '8888' % ip rule show prio 23 23: from all ipproto tcp sport 8888 dport 222 lookup 123 (cherry picked from commit ff43733074675b94ce4ead83fe63870b6cf953c5)
2023-10-07pppoe: T5630: verify MRU is less or equal then MTUChristian Breunig
(cherry picked from commit e357258e645cf85de0035d4ecfbf99db4dd90f7e)
2023-10-07pppoe: T5630: allow to specify MRU in addition to already configurable MTUChristian Breunig
Set the MRU (Maximum Receive Unit) value to n. PPPd will ask the peer to send packets of no more than n bytes. The value of n must be between 128 and 16384, the default was always 1492 to match PPPoE MTU. A value of 296 works well on very slow links (40 bytes for TCP/IP header + 256 bytes of data). Note that for the IPv6 protocol, the MRU must be at least 1280. CLI: set interfaces pppoe pppoe0 mru 1280 (cherry picked from commit e062a8c11856f213983f5b41f50d4f9dbc0dde0f)
2023-10-05T4320: remove references to obsoleted legacy version filesJohn Estabrook
(cherry picked from commit aeb0138c9df73b57489eced152f026c0666d1ee5)
2023-10-02T5165: Migrate policy local-route rule x destination to addressViacheslav Hletenko
Migrate policy local-route <destination|source> to node address replace 'policy local-route{v6} rule <tag> destination|source <x.x.x.x>' => 'policy local-route{v6} rule <tag> destination|source address <x.x.x.x>' (cherry picked from commit 9f7a5f79200782f7849cab72f55a39dedf45f214)
2023-09-28mdns: T5615: Allow controlling IP version to use for mDNS repeaterIndrajit Raychaudhuri
This commit adds a new configuration option to the mDNS repeater service to allow controlling which IP version to use for mDNS repeater. Additionally, publishing AAAA record over IPv4 and A record over IPv6 is disabled as suggested. See: - https://github.com/lathiat/avahi/issues/117#issuecomment-1651475104 - https://bugzilla.redhat.com/show_bug.cgi?id=669627#c2 (cherry picked from commit e66f7075ee12ae3107d29efaf683442c3535e8b9)
2023-09-28Merge pull request #2319 from vyos/mergify/bp/sagitta/pr-2313Christian Breunig
T5165: Add option protocol for policy local-route (backport #2313)
2023-09-28firewall: T5614: Add support for matching on conntrack helpersarthurdev
(cherry picked from commit 81dee963a9ca3224ddbd54767a36efae5851a001)
2023-09-28T5165: Add option protocol for policy local-routeViacheslav Hletenko
Add option `protocol` for policy local-route set policy local-route rule 100 destination '192.0.2.12' set policy local-route rule 100 protocol 'tcp' set policy local-route rule 100 set table '100' (cherry picked from commit 96b8b38a3c17aa08fa964eef9141cf89f1c1d442)
2023-09-28ipsec: T5606: Add support for whole CA chainssarthurdev
Also includes an update to smoketest to verify (cherry picked from commit 1ac230548c86d3308ff5b479b79b0e64b75a0e8a)
2023-09-27conf-mode: T5412: move dependency check from smoketest to nosetestJohn Estabrook
(cherry picked from commit 12440ea1af8e60482a6a91c1cb04dcb86d7f4a68)
2023-09-22Merge pull request #2291 from vyos/mergify/bp/sagitta/pr-2284Christian Breunig
bgp: T5596: add new features from FRR 9 (backport #2284)
2023-09-21T5602: Reverse-proxy add option backup for backend serverViacheslav Hletenko
A `backup` server can be defined to take over in the case of all other backends failing set load-balancing reverse-proxy backend <tag> server <tag> address '192.0.2.3' set load-balancing reverse-proxy backend <tag> server <tag> port '8883' set load-balancing reverse-proxy backend <tag> server <tag> backup (cherry picked from commit cb297aea56da91144c53be1f396b64a26a8e5b04)
2023-09-19bgp: T5596: add new features from FRR 9Christian Breunig
* Add BGP Software Version capability (draft-abraitis-bgp-version-capability) set protocols bgp neighbor 192.0.2.1 capability software-version * Add BGP neighbor path-attribute treat-as-withdraw command set protocols bgp neighbor 192.0.2.1 path-attribute treat-as-withdraw (cherry picked from commit d285355716708a46767c18661976906812da8a3c)
2023-09-19isis: T5597: add new features from FRR 9Christian Breunig
* Add support for IS-IS advertise-high-metrics set protocols isis advertise-high-metrics * Add support for IS-IS advertise-passive-only set protocols isis advertise-passive-only (cherry picked from commit f7d35c15256ea74ab32c9b978a5c6fdbd659a7a0)
2023-09-14T5561: nat: defining inbound|outbound interface should not be mandatory ↵Nicolas Fort
while configuring dNAT|sNAT rule (cherry picked from commit ec5437913e489f40fea6bab89a6bb5f565cd1ab7)
2023-09-12T5562: Cleanup netns for smoketest load-balancing wanViacheslav Hletenko
Cleanup nets for the smoketest load-balancing Remove deleting container interfaces from default netns as those interfaces leave inly in netns. (cherry picked from commit 849499f44f6e50c591e250cf40b5ab0115839b53)
2023-09-09vxlan: T3700: support VLAN tunnel mapping of VLAN aware bridgesChristian Breunig
FRR supports a new way of configuring VLAN-to-VNI mappings for EVPN-VXLAN, when working with the Linux kernel. In this new way, the mapping of a VLAN to a VNI is configured against a container VXLAN interface which is referred to as a 'Single VXLAN device (SVD)'. Multiple VLAN to VNI mappings can be configured against the same SVD. This allows for a significant scaling of the number of VNIs since a separate VXLAN interface is no longer required for each VNI. Sample configuration of SVD with VLAN to VNI mappings is shown below. set interfaces bridge br0 member interface vxlan0 set interfaces vxlan vxlan0 external set interfaces vxlan vxlan0 source-interface 'dum0' set interfaces vxlan vxlan0 vlan-to-vni 10 vni '10010' set interfaces vxlan vxlan0 vlan-to-vni 11 vni '10011' set interfaces vxlan vxlan0 vlan-to-vni 30 vni '10030' set interfaces vxlan vxlan0 vlan-to-vni 31 vni '10031' (cherry picked from commit 7f6624f5a6f8bd1749b54103ea5ec9f010adf778)
2023-09-03wireless: T5540: fix smoketests after adjusting VHT channel widthChristian Breunig
Commit 6896aabb6 ("wireless: T5540: fix VHT capability settings for 802.11ac" changed how the VHT channel-sidth is configured in hostapd - but smoketests did not get adjusted.
2023-08-31eapol: T4782: Support multiple CA chainssarthurdev
2023-08-26firewall: T5080: Disable conntrack unless required by rulessarthurdev
2023-08-25interface: T3509: Add per-interface IPv6 source validationsarthurdev
2023-08-25firewall: T3509: Add support for IPv6 return path filteringsarthurdev
2023-08-24smoketest: T5447: wpa_supplicant is only run if requiredChristian Breunig
2023-08-24system: T5505: fix zebra route-map is not removed from FRRChristian Breunig
Configuring "set system ip protocol ospf|bgp route-map foo" and commit it installs the route-map into FRR. Removing the CLI configuration "delete system ip protocol" does not remove the route-map from FRR - it stays active. This commit adds the fix and appropriate smoketests extenstion.
2023-08-23Merge pull request #2159 from c-po/t5491-wifiChristian Breunig
wifi: T5491: allow white-/blacklisting station MAC addresses for security
2023-08-23Merge pull request #2160 from sever-sever/T5448Christian Breunig
T5448: Add configuration host-name for zabbix-agent
2023-08-23Merge pull request #2162 from nicolas-fort/T5472Christian Breunig
T5472: nat redirect: allow redirection without defining redirected port
2023-08-23Merge pull request #2142 from nicolas-fort/T5450Christian Breunig
T5450: allow inverted matcher for interface and interface-group
2023-08-23T5472: nat redirect: allow redirection without defining redirected portNicolas Fort
2023-08-23T5450: update smoketest and interface definition in order to work with new ↵Nicolas Fort
firewall cli
2023-08-23T5448: Add configuration host-name for zabbix-agentViacheslav Hletenko
Ability to configure host-name for zabbix-agent set service monitoring zabbix-agent host-name 'r-vyos'
2023-08-23Merge pull request #2156 from giga1699/T5447Christian Breunig
T5447: Initial support for MACsec static keys
2023-08-20T5447: Implement maintainer feedbackGiga Murphy
2023-08-20wifi: T5491: allow white-/blacklisting station MAC addresses for securityChristian Breunig
Station MAC address-based authentication means: * 'allow' accept all clients except the one on the deny list * 'deny' accept only clients listed on the accept list New CLI commands: * set interfaces wireless wlan0 security station-address mode <accept|deny> * set interfaces wireless wlan0 security station-address accept mac <mac> * set interfaces wireless wlan0 security station-address deny mac <mac>
2023-08-19bgp: T5466: rename type on CLI per-nexhop -> per-nexthop for l3vpn MPLS labelsChristian Breunig
This fixes a CLI typo added in commit 77ef9f800 ("T5466: L3VPN label allocation mode").
2023-08-18T5447: Add smoketest for MACsec static keysGiga Murphy
2023-08-18smoketest: bgp: T5466: remove trailing whitespaceChristian Breunig
Commit 77ef9f800 ("T5466: L3VPN label allocation mode") added support for a new CLI node that is added "label vpn export allocation-mode per-nexthop" to FRRs running configuration. Unfortunately the smoketest contained a trailing whitespace and the above mentioned line could not be evaluated to true.
2023-08-17Merge pull request #2130 from aapostoliuk/T5409-sagittaChristian Breunig
wireguard: T5409: Added 'set interfaces wireguard wgX threaded'
2023-08-17wireguard: T5409: rename threaded CLI not to per-client-threadChristian Breunig
Using threaded as CLI node is a very deep term used by kernel threads. To make this more understandable to users, rename the node to per-client-thread. It's also not necessary to test if any one peer is configured and probing if the option is set. There is a base test which requires at least one peer to be configured.
2023-08-16 T5466: L3VPN label allocation modefett0
2023-08-13smoketest: T5467: verify OSPF(v3) interface removal in VRF contextChristian Breunig
Testcases after the bugfix in commit 011697508 ("T5467: removing ospf(v3) or isis interface in VRF context did not clear FRR config"). For ISIS change in the tests - do not run self_commit() in a for loop if not really necessary, this will slow down the tests.
2023-08-13smoketest: openvpn: T5270:Christian Breunig
This fixes the smoketest after the change in commit e7d7bd20b ("openvpn: T5270: do not require classic DH params in any more Generate 'dh none' instead and let OpenVPN use ECDH") ... as there is no exception raised 05:47:26 DEBUG - ====================================================================== 05:47:26 DEBUG - FAIL: test_openvpn_server_verify (__main__.TestInterfacesOpenVPN.test_openvpn_server_verify) 05:47:26 DEBUG - ---------------------------------------------------------------------- 05:47:26 DEBUG - Traceback (most recent call last): 05:47:26 DEBUG - File "/usr/libexec/vyos/tests/smoke/cli/test_interfaces_openvpn.py", line 342, in test_openvpn_server_verify 05:47:26 DEBUG - with self.assertRaises(ConfigSessionError): 05:47:26 DEBUG - AssertionError: ConfigSessionError not raised
2023-08-11ipv6: T5464: add support for per-interface dad (duplicate address detection) ↵Christian Breunig
setting
2023-08-11Merge pull request #2016 from nicolas-fort/T5160Christian Breunig
T5160: Firewall refactor
2023-08-11T5160: firewall refactor: change default value for <default-action> from ↵Nicolas Fort
<drop> to <accept> if default-action is not specified in base chains
2023-08-11T5160: firewall refactor: move <set firewall ipv6 ipv6-name ...> to <set ↵Nicolas Fort
firewall ipv6 name ...> . Also fix some unexpected behaviour with geoip.
2023-08-11T5160: firewal refactor: fix tabulation for geo-ip parsing code. Typo fix in ↵Nicolas Fort
firewall smoketest
2023-08-11T5160: firewall refactor: change firewall ip to firewall ipv4Nicolas Fort