summaryrefslogtreecommitdiff
path: root/smoketest/scripts
AgeCommit message (Collapse)Author
2025-02-23bridge: T7192: fix verify() to not allow member interface used multiple timesChristian Breunig
When configuring set interfaces bridge br10 member interface eth1 set interfaces bridge br20 member interface eth1 commit Checking the interface assignment afterwards shows 242: br20: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 62:34:3a:8a:fe:49 brd ff:ff:ff:ff:ff:ff [edit] 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master br20 state UP mode DEFAULT group default qlen 1000 link/ether 00:50:56:b3:cd:ba brd ff:ff:ff:ff:ff:ff altname enp0s19 altname ens19 The later addition wins and the CLI reports eth1 is assigned to br20 "master br20". A member interface can not be used multiple times.
2025-02-23bond: T7191: fix error message when member interface is used multiple timesChristian Breunig
Sharing the same physical interface among multiple bond interfaces causes information to be lost within the error message set interfaces bonding bond10 member interface eth1 set interfaces bonding bond10 member interface eth2 set interfaces bonding bond20 member interface eth1 set interfaces bonding bond20 member interface eth2 commit Results in: [ interfaces bonding bond10 ] Can not add interface "eth1" to bond, it is already a member of bond "b"! [[interfaces bonding bond10]] failed [ interfaces bonding bond20 ] Can not add interface "eth1" to bond, it is already a member of bond "b"! It should infact output the full name of the bond interface.
2025-02-22smoketest: Add XFRM IPsec testViacheslav Hletenko
2025-02-22smoketest: Add required addresses before setup tunnelsViacheslav Hletenko
Add required IP addresses on the interface eth1 which is a source of a tunnel
2025-02-21T7073: Verify VPP buffers page sizekhramshinr
T7077: Verify VPP memory default-hugepage-size T7079: Verify VPP memory main-heap-page-size T7080: Verify VPP statseg page-size get available hugepage sizes align memory main-heap-size by page size validate host_resources max_map_count
2025-02-20firewall: T7148: Bridge state-policy uses drop in place of rejectsarthurdev
2025-02-20Merge pull request #4353 from natali-rs1985/T5810Daniil Baturin
T5810: Add support for RPKI source ip
2025-02-20Merge pull request #4351 from markh0338/int-group-container-validationChristian Breunig
firewall: T7177: Update interface-name constraint to allow "pod-" interface names
2025-02-19T5810: Add support for RPKI source ipNataliia Solomko
2025-02-19firewall: T7177: update interface-name.xml.i constraint and smoketest to ↵Mark
support pod interfaces from containers
2025-02-19T6628: IPoE-server rename "static-ip" to "ip-address" for local authNataliia Solomko
2025-02-18Merge pull request #4347 from c-po/bgp-redistr-table-T7163Daniil Baturin
bgp: T7163: add CLI route-map and metric support for "redistribute table"
2025-02-18Merge pull request #4108 from sarthurdev/wlb_pythonViacheslav Hletenko
wlb: T4470: Migrate WAN Load Balancer to XML/Python
2025-02-17ruff: T6583: Reformat to comply with code styleIndrajit Raychaudhuri
2025-02-17dhcp: T6948: Smoketest for DHCP server leases sync with hostd recordsIndrajit Raychaudhuri
The test `test_dhcp_hostsd_lease_sync` validates DHCP server leases in sync with hostd records. Since the DHCP server running in smoketest environment might not have actual clients to lease IP addresses, we simulate the lease creation and deletion using kea helper functions (`kea_add_lease` and `kea_delete_lease`).
2025-02-17T6906: IPoE-server smoke test for start-session optionNataliia Solomko
2025-02-14T7067: VPP CPU corelist-workers should be calculated and verifiedNataliia Solomko
2025-02-13wlb: T4470: Migrate WAN load balancer to Python/XMLsarthurdev
2025-02-13bgp: T7163: add CLI route-map and metric support for "redistribute table"Christian Breunig
* set protocols bgp address-family <ipv4-unicast|ipv6-unicast> redistribute table <n> [metric <n>] [route-map <name>]
2025-02-13bgp: T7161: fix IPv4/IPv6 unicast AFI "redistribute table" commandChristian Breunig
Re-use existing XML constraint added via commit 8f6246da6 ("xml: T7161: provide re-usable building block for alternative routing tables") and add handy CLI completion helper. FRRouting supports redistribution of multiple non-main tables, thus make this a multi node in addition, too.
2025-02-12T7072: VPP CPU skip-cores should be verifiedNataliia Solomko
2025-02-11webproxy: T7057: Fixed 'domain-nocache' commandaapostoliuk
Fixed 'domain-nocache' command. Added config generation for this command.
2025-02-06Merge pull request #4335 from c-po/T5103Christian Breunig
vyos.ifconfig: T5103: force dhclient restart on VRF change
2025-02-05vyos.ifconfig: T7135: only restart DHCPv6 client if neededChristian Breunig
Previously the DHCPv6 client was restarted on any change to the interface, including changes only to the interface description. Re-use pattern from IPv4 DHCP to only restart the DHCP client if necessary.
2025-02-05smoketest: T2326: remove NHRP pylint W0611: unused importChristian Breunig
2025-02-05vyos.ifconfig: T5103: force dhclient restart on VRF changeChristian Breunig
Moving an interface in, out or between VRFs will not re-install the received default route. This is because the dhclient binary is not restarted in the new VRF. Dhclient itself will report an error like: "receive_packet failed on eth0.10: Network is down". Take the return value of vyos.ifconfig.Interface().set_vrf() into account to forcefully restart the DHCP client process and optain a proper lease.
2025-02-05T7069: VPP check for CPU main coreNataliia Solomko
2025-02-04smoketest: T6989: extend cli_set() signature to pass CLI node valueChristian Breunig
2025-02-04syslog: T6989: increase local log size form 256KiB -> 1MiBChristian Breunig
2025-02-04syslog: T6989: add possibility to define VRF per remoteChristian Breunig
Rsyslog supports individual VRFs per omfwd remote entry - so we should support this, too.
2025-02-04Merge branch 'current' into T7075Nataliia S.
2025-02-04T7075: VPP check driver's options before applyNataliia Solomko
2025-02-03Merge pull request #5 from natali-rs1985/T7066Viacheslav Hletenko
T7066: VPP CPU workers verification
2025-02-03T7066: VPP CPU workers should be calculated and verifiedNataliia Solomko
2025-02-03syslog: T6989: rename "global" to "local"Christian Breunig
The previously "global" options actually were only relevant for the local logging to /var/log/messages.
2025-02-03syslog: T6989: move up "global marker" one level in CLIChristian Breunig
2025-02-03syslog: T6989: move up "global preserve-fqdn" one level in CLIChristian Breunig
Move "global preserve-fqdn" one CLI level up, as it relates to all logging targets (console, global and remote).
2025-02-03syslog: T6989: convert old configuration format to "advanced"Christian Breunig
2025-02-03syslog: T6989: rename "host" to "remote"Christian Breunig
2025-02-01smoketest: temporary skip bonding testsViacheslav Hletenko
Skip bonding test to check the building, from time to time tests (bond) got recursion as in https://vyos.dev/T7117
2025-01-30smoketest: fix delete bonding before checking bond delete ifaceViacheslav Hletenko
2025-01-27haproxy: T7081: Support HTTP compression (#4314)Alex W
2025-01-27Merge pull request #1 from vyos/sever-sever-lcpViacheslav Hletenko
LCP: enable by default route-no-paths
2025-01-27LCP: enable by default route-no-pathsViacheslav Hletenko
2025-01-24Merge pull request #4200 from sskaje/T4930-1Daniil Baturin
T4930: Allow WireGuard peers via DNS hostname
2025-01-24Merge pull request #4216 from HollyGurza/T6641Daniil Baturin
T6641: Add vyos-network-event-logger Service
2025-01-24GRE: Add tunnel-type erspan, l3 and tebViacheslav Hletenko
Add tunnel type - erspan - l3 - teb (Transparent Ethernet Bridge) By default L3 GRE interfaces cannot be bridged to a bridge interface. Add the ability to change tunnel type. set vpp interfaces gre gre2 tunnel-type 'teb'
2025-01-21smoketest: Add check bonding state without VLANsViacheslav Hletenko
2025-01-21T6895: Merge the hsflowd-based sFlow and uacctd-based sFlow (#4310)Nataliia S.
2025-01-21T6641: Add vyos-network-event-logger Servicekhramshinr
The service parses and logs network events for improved monitoring and diagnostics. Supported event types include: - `RTM_NEWROUTE`, `RTM_DELROUTE` - `RTM_NEWLINK`, `RTM_DELLINK` - `RTM_NEWADDR`, `RTM_DELADDR` - `RTM_NEWNEIGH`, `RTM_DELNEIGH`, `RTM_GETNEIGH` - `RTM_NEWRULE`, `RTM_DELRULE` Added operational mode commands for filtered log retrieval: - `show log network-event <event-type> <interface>`: Retrieve logs filtered by event type and interface. - `show interfaces <type> <name> event-log <event-type>`: Display interface-specific logs filtered by event type.
generated by cgit v1.2.3 (git 2.39.1) at 2026-08-24 11:21:52 +0000