summaryrefslogtreecommitdiff
path: root/smoketest
AgeCommit message (Collapse)Author
2020-11-01openvpn: T2994: remove workarounds for individual ipv4 and ipv6 keysChristian Poessinger
Remove workaround which split (local|remote)_address and also subnet keys into individual keys for the assigned IP address family (4/6). During template rendering check IP version by introducing new ipv4 and ipv6 Jinja2 filters {% if foo | ipv4 %} or {% if bar | ipv6 %} options.
2020-11-01smoketest: VyOS config files do not ned +x optionChristian Poessinger
2020-10-31smoketest: openvpn: fix testcase for server statementChristian Poessinger
After commit 7e546be921 ("openvpn: T2994: temporary revert to 1.2 crux behavior for client pools") also adjust the testcase to not expect the "nopool" statement on the server command.
2020-10-31smoketest: openvpn: test server mode "replace-default-route"Christian Poessinger
2020-10-30smoketest: openvpn: extend server verify() test with TLS auth keysChristian Poessinger
2020-10-30smoketest: openvpn: test server mode verify() stepsChristian Poessinger
2020-10-30smoketest: openvpn: test site2site mode verify() stepsChristian Poessinger
2020-10-30smoketest: openvpn: test client mode verify() stepsChristian Poessinger
2020-10-30smoketest: ssh: add bond to vrf testcaseChristian Poessinger
Bind sshd to given VRF and check if it really runs in the VRF context.
2020-10-29verify: T2587: allow MTU < 1280 when IPv6 is disabled on an interfaceChristian Poessinger
2020-10-28smoketest: accel: T2631: check disable-accounting optionChristian Poessinger
2020-10-28vyos.util: T2995: rename vyos_dict_search() -> dict_search()Christian Poessinger
Renamed using snippet below: ---------------------------- for file in $(find . -name "*.py") do sed -i "s/vyos_dict_search/dict_search/" $file done
2020-10-26smoketest: T3003: extend framework to load arbitrary config fileJohn Estabrook
2020-10-19smoketest: openvpn: test VRF assignmentChristian Poessinger
2020-10-19smoketest: openvpn: ensure interfaces do not persist after deletionChristian Poessinger
2020-10-18smoketest: openvpn: add server (P-t-MP) and site2site testcasesChristian Poessinger
2020-10-18openvpn: T2969: force creation of tunnel interfacesChristian Poessinger
A lot of VyOS code requires the Kernel interface to be present in order to properly work and adjust the interface to the users CLI intends (alias, ipv6, vrf - just to name a few). OpenVPN - when run in client mode - only creates the interface (e.g. vtun1) when the connection to the OpenVPN server was successful. This can't be always the case due to e.g. software-updates or routing issues to the remote side. This will in the end result in a zombie OpenVPN client interface where some config items might not have been set when the interface finally comes up - imagine a wrong assigned VRF instance. By always creating the OpenVPN interface manuall we ensure that all the CLI settings are properly configured in the OS kernel.
2020-10-18smoketest: openvpn: add initial client testChristian Poessinger
2020-10-18smoketest: sstp: remove unused variableChristian Poessinger
2020-10-17smoketest: add IPv6 option tests to BasicInterfaceTestChristian Poessinger
2020-10-17sysctl-forwarding: T752: Add disable forwarding for ipv4sever-sever
2020-10-13pppoe-server: T2976: fix local-users default value retrieval from XMLChristian Poessinger
We must use XML node style (hyphen over underscore).
2020-10-12smoketest: tftp-server: listen on dummy interface address rather then loopbackChristian Poessinger
2020-10-11smoketest: tftp-server: add initial testcasesChristian Poessinger
2020-10-11smoketest: nat: extend snat and add dnat test casesChristian Poessinger
2020-10-11smoketest: nat: concentrate validation logic checksChristian Poessinger
2020-10-05nat: T2951: use proper comments for source/destination loggingChristian Poessinger
For both source and destination NAT always the LOG name contained DST - which is definately false. This has been corrected to use SRC and DST on the appropriate rules.
2020-10-04smoketest: ntp: T2944: fix "allowed-networks statement" testChristian Poessinger
Remove duplicate localhost listen IP addresses. Commit ca61add5e7 ("ntp: T2944: By default do not listen port 123 on any address") explicitly added listen statements for localhost.
2020-10-04sstp: T2960: migrate to get_config_dict() and reusable templatesChristian Poessinger
2020-10-04pppoe-server: T2953: rename CLI local-ip to gateway-addressChristian Poessinger
Required to get a common CLI for all services provided by Accel-PPP. Once the CLI for each service is consitent - Jinja2 templates can be reused together with get_config_dict().
2020-10-04sstp: T2953: migrate gateway-address, client-ip-settings to common levelChristian Poessinger
* move "network-settings gateway-address" to "gateway-address" * move "network-settings client-ip-settings" to "client-ip-pool"
2020-10-03smoketest: sstp: pppoe: use common RADIUS testsChristian Poessinger
2020-10-03smoketest: sstp: add basic testsChristian Poessinger
2020-10-03smoketest: accel-ppp: prepare common base for multiple accel instance testsChristian Poessinger
2020-10-03pppoe-server: T2956: make use of defaultValue list featureChristian Poessinger
2020-10-01vlan: configdict: T2945: determine if vlan is part of bridgeChristian Poessinger
Every interface knows if it is part of a bridge or not - except a VLAN (VIF) interface. Also VLANs should be aware of its master bridge. Add a testcase to ensure when VIFs on an interface change the bridge does not loos one of it's members.
2020-10-01macsec: T2023: use proper config path for source-interface on removalChristian Poessinger
The config path is altered in get_interface_dict() to the base of the interface in question, e.g. 'interfaces macsec macsec1' - this must be reflected when calling othe methods of Config().
2020-10-01pppoe-server: T2936: move to get_config_dict()Christian Poessinger
For easier configuration read in (CLI) validation and also template rendering it makes sense to drop the old, single implementation and move to the new, generic get_config_dict() approach. Recurring configuration parts like ip-pool, ipv6-pool and nameservers have also been split our into individual templates which will be included through Jinja2 - leading to a single-source of the template sections, too.
2020-09-30wireguard: T2939: bugfix when removing individual peersChristian Poessinger
When individual peers that have been removed got determined they have been added to the config dict as list instead of string - which broke the system plumbing commands as they can not handle a Python list.
2020-09-26smoketest: platform: check for required virtio/vmxnet driversChristian Poessinger
2020-09-25dns: forwarding: T2921: migrate to get_config_dict()Christian Poessinger
2020-09-24smoketest: dns: dynamic: add missing import statementChristian Poessinger
Commit 58ead741 ("smoketest: (re-)use process_named_running() from vyos.util") missed an import statement for process_named_running(). This has been fixed.
2020-09-24smoketest: (re-)use process_named_running() from vyos.utilChristian Poessinger
2020-09-24smoketest: dns: forwarding: T2921: add initial testcasesChristian Poessinger
2020-09-22smoketest: macsec: T2023: check that source-interface is not used by any ↵Christian Poessinger
other interface
2020-09-21smoketest: kernel: check for mandatory bond/lacp and bridge optionsChristian Poessinger
2020-09-21smoketest: macsec: T2023: test MTU settingChristian Poessinger
2020-09-20wwan: ifconfig: T2905: sync CLI nodes in dialup interfacesChristian Poessinger
Both PPPoE and WWAN interfaces are dialer interfaces handled by ppp, but use different CLI nodes for the same functionality. PPPoE has "connect-on-demand" to initiate an "on-demand" dialing and WWAN uses "ondemand" for this purpose. Rename WWAN "ondemand" node to "connect-on-demand".
2020-09-20smoketest: T2903: test 802.1ad (Q-in-Q) ethertypeChristian Poessinger
2020-09-19smoketest: T2886: validate RADIUS configurationChristian Poessinger
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 14:36:56 +0000