summaryrefslogtreecommitdiff
path: root/smoketest
AgeCommit message (Collapse)Author
2023-10-31Merge pull request #2413 from c-po/t5668-vxlanChristian Breunig
vxlan: T5668: add CLI knob to enable ARP/ND suppression
2023-10-30Merge pull request #2417 from c-po/vxlan-t5699Christian Breunig
vxlan: T5699: migrate "external" CLI know to "parameters external"
2023-10-30vxlan: T5699: migrate "external" CLI know to "parameters external"Christian Breunig
As we have a bunch of options under "paramteres" already and "external" is clearly one of them it should be migrated under that node as well.
2023-10-30vxlan: T5668: add CLI knob to enable ARP/ND suppressionChristian Breunig
In order to minimize the flooding of ARP and ND messages in the VXLAN network, EVPN includes provisions [1] that allow participating VTEPs to suppress such messages in case they know the MAC-IP binding and can reply on behalf of the remote host. In Linux, the above is implemented in the bridge driver using a per-port option called "neigh_suppress" that was added in kernel version 4.15. [1] https://www.rfc-editor.org/rfc/rfc7432#section-10
2023-10-29T5558: smoketest: fix nat definitions on dialup-router-medium-vpn.Nicolas Fort
2023-10-25T5681: Firewall,Nat and Nat66: simplified and standarize interface matcher ↵Nicolas Fort
(valid for interfaces and groups) in firewal, nat and nat66.
2023-10-24Merge pull request #2355 from nicolas-fort/T5643Christian Breunig
T5643: nat: add interface-groups to nat. Use same cli structure for i…
2023-10-22Merge pull request #2391 from sever-sever/T5299Viacheslav Hletenko
T5299: Add missed option ceiling for QoS shaper
2023-10-22Merge pull request #2386 from c-po/vxlan-t5671Christian Breunig
vxlan: T5671: change port to IANA assigned default port
2023-10-22T5299: Add missed option ceiling for QoS shaperViacheslav Hletenko
Add missed option `ceil` for QoS class 'trafficshaper'
2023-10-21smoketest: T2897: add basic cluster configChristian Breunig
2023-10-20vxlan: T5671: change port to IANA assigned default portChristian Breunig
Currently VyOS VXLAN implementation uses the Linux assigned port 8472 that predates the IANA assignment. As Most other vendors use the IANA assigned port, follow this guideline and use the new default port 4789. Existing configuration not defining an explicit port number will be migrated to the old default port number of 8472, keeping existing configurations work!
2023-10-20T5667: BGP label-uniscat enable ecmpfett0
2023-10-19Merge pull request #2362 from nicolas-fort/T5541Christian Breunig
T5541: firewall zone: re add firewall zone-base firewall
2023-10-19Merge pull request #2344 from nicolas-fort/T5637Christian Breunig
T5637: add new rule at the end of base chains for default-actions and log capabilities
2023-10-16T5634: Smoketest add encryption ciphersViacheslav Hletenko
As `providers legacy default` option was deleted with insecure DES and Blowfish ciphers, the smoketest cannot pass without adding encyption ciphers Otherwise Oct 16 09:41:34 r4 openvpn-vtun5[9648]: DCO version: N/A Oct 16 09:41:34 r4 openvpn-vtun5[9648]: Cipher BF-CBC not supported Oct 16 09:41:34 r4 openvpn-vtun5[9648]: Exiting due to fatal error Fix the smoketest
2023-10-13T5541: firewall zone: re add firewall zone-base firewallNicolas Fort
2023-10-11T5643: nat: add interface-groups to nat. Use same cli structure for ↵Nicolas Fort
interface-name|interface-group as in firewall.
2023-10-11Merge pull request #2342 from sever-sever/T5165Viacheslav Hletenko
T5165: Implement policy local-route source and destination port
2023-10-08Merge pull request #2263 from Cheeze-It/currentViacheslav Hletenko
T5530: isis: Adding loop free alternate feature
2023-10-07Merge pull request #2335 from c-po/t5630-pppoe-mruDaniil Baturin
pppoe: T5630: allow to specify MRU in addition to already configurable MTU
2023-10-06T5637: add new rule at the end of base chains for default-actions. This ↵Nicolas Fort
enables log capabilities for default-action in base chains. And of course, add option for enabling log for default-action
2023-10-06T5165: Implement policy local-route source and destination portViacheslav Hletenko
Add `policy local-route` source and destination port set policy local-route rule 23 destination port '222' set policy local-route rule 23 protocol 'tcp' set policy local-route rule 23 set table '123' set policy local-route rule 23 source port '8888' % ip rule show prio 23 23: from all ipproto tcp sport 8888 dport 222 lookup 123
2023-10-06T5530: isis: Adding loop free alternate featureCheeze_It
2023-10-04T4320: remove references to obsoleted legacy version filesJohn Estabrook
2023-10-03pppoe: T5630: verify MRU is less or equal then MTUChristian Breunig
2023-10-03pppoe: T5630: allow to specify MRU in addition to already configurable MTUChristian Breunig
Set the MRU (Maximum Receive Unit) value to n. PPPd will ask the peer to send packets of no more than n bytes. The value of n must be between 128 and 16384, the default was always 1492 to match PPPoE MTU. A value of 296 works well on very slow links (40 bytes for TCP/IP header + 256 bytes of data). Note that for the IPv6 protocol, the MRU must be at least 1280. CLI: set interfaces pppoe pppoe0 mru 1280
2023-10-02smoketests: T5626: verify Kernel options required for containersChristian Breunig
2023-09-30ddclient: T5574: Support per-service cache management for servicesIndrajit Raychaudhuri
Add support for per-service cache management for ddclient providers via `wait-time` and `expiry-time` options. This allows for finer-grained control over how often a service is updated and how long the hostname will be cached before being marked expired in ddclient's cache. More specifically, `wait-time` controls how often ddclient will attempt to check for a change in the hostname's IP address, and `expiry-time` controls how often ddclient to a forced update of the hostname's IP address. These options intentionally don't have any default values because they are provider-specific. They get treated similar to the other provider- specific options in that they are only used if defined.
2023-09-30Merge pull request #2325 from sever-sever/T5165Christian Breunig
T5165: Migrate policy local-route rule x destination to address
2023-09-30Merge pull request #2303 from indrajitr/ddclient-misc-1Christian Breunig
ddclient: T5612: Miscellaneous improvements and fixes for dynamic DNS
2023-09-29T5165: Migrate policy local-route rule x destination to addressViacheslav Hletenko
Migrate policy local-route <destination|source> to node address replace 'policy local-route{v6} rule <tag> destination|source <x.x.x.x>' => 'policy local-route{v6} rule <tag> destination|source address <x.x.x.x>'
2023-09-29T5616: firewall: add option to be able to match firewall marks in firewall ↵Nicolas Fort
filter and in policy route.
2023-09-28mdns: T5615: Allow controlling IP version to use for mDNS repeaterIndrajit Raychaudhuri
This commit adds a new configuration option to the mDNS repeater service to allow controlling which IP version to use for mDNS repeater. Additionally, publishing AAAA record over IPv4 and A record over IPv6 is disabled as suggested. See: - https://github.com/lathiat/avahi/issues/117#issuecomment-1651475104 - https://bugzilla.redhat.com/show_bug.cgi?id=669627#c2
2023-09-28Merge pull request #2295 from sever-sever/T5217-synproxyChristian Breunig
T5217: Add firewall synproxy
2023-09-28Merge pull request #2304 from sarthurdev/conntrack_helpersJohn Estabrook
conntrack: T5376: T5598: Restore kernel conntrack helpers
2023-09-28Merge pull request #2306 from sarthurdev/fw_helperJohn Estabrook
firewall: T5614: Add support for matching on conntrack helper
2023-09-28Merge pull request #2305 from sarthurdev/T5606Daniil Baturin
ipsec: T5606: Add support for whole CA chains
2023-09-27T5165: Add option protocol for policy local-routeViacheslav Hletenko
Add option `protocol` for policy local-route set policy local-route rule 100 destination '192.0.2.12' set policy local-route rule 100 protocol 'tcp' set policy local-route rule 100 set table '100'
2023-09-24conntrack: T5376: T5598: Fix for kernel conntrack helperssarthurdev
`nf_conntrack_helper` that auto-assigned helpers is removed from the kernel
2023-09-24firewall: T5614: Add support for matching on conntrack helpersarthurdev
2023-09-24ipsec: T5606: Add support for whole CA chainssarthurdev
Also includes an update to smoketest to verify
2023-09-23ddclient: T5612: Additional refactoring for scripts and smoketestsIndrajit Raychaudhuri
Additional cleanup and refactoring for ddclient scripts including the smotektests.
2023-09-23ddclient: T5612: Relax hostname validation for apex and wildcard entryIndrajit Raychaudhuri
Some porvides (like 'namecheap') allow to use '@' or '*' as hostname prefix for apex and wildcard records. This commit relaxes the hostname validation to allow these prefixes.
2023-09-23ddclient: T5612: Enable TTL support for web-service based protocolsIndrajit Raychaudhuri
Enable TTL support for web-service based protocols in addition to RFC2136 based (nsupdate) protocol. Since TTL is not supported by all protocols, and thus cannot have a configuration default, the existing XML snippet `include/dns/time-to-live.xml.i` does not have common `<defaultValue>300</defaultValue>` anymore and is instead added explicitly whenever necessary.
2023-09-23ddclient: T5612: Fix VRF support for ddclient serviceIndrajit Raychaudhuri
Fix VRF support interface definition and configuration mode for ddclient to actually capture the VRF name and pass it to the template.
2023-09-21T5217: Add firewall synproxyViacheslav Hletenko
Add ability to SYNPROXY connections It is useful to protect against TCP SYN flood attacks and port-scanners set firewall global-options syn-cookies 'enable' set firewall ipv4 input filter rule 10 action 'synproxy' set firewall ipv4 input filter rule 10 destination port '22' set firewall ipv4 input filter rule 10 inbound-interface interface-name 'eth1' set firewall ipv4 input filter rule 10 protocol 'tcp' set firewall ipv4 input filter rule 10 synproxy tcp mss '1460' set firewall ipv4 input filter rule 10 synproxy tcp window-scale '7'
2023-09-20T5602: Reverse-proxy add option backup for backend serverViacheslav Hletenko
A `backup` server can be defined to take over in the case of all other backends failing set load-balancing reverse-proxy backend <tag> server <tag> address '192.0.2.3' set load-balancing reverse-proxy backend <tag> server <tag> port '8883' set load-balancing reverse-proxy backend <tag> server <tag> backup
2023-09-19conntrack: firewall: T4502: Update conntrack check for new flowtable CLIsarthurdev
Also updates flowtable smoketest to verify conntrack enabled
2023-09-19Merge pull request #2284 from c-po/t5596-bgpChristian Breunig
bgp: T5596: add new features from FRR 9
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 21:24:06 +0000