summaryrefslogtreecommitdiff
path: root/smoketest
AgeCommit message (Collapse)Author
2022-08-25smoketest: T4643: Change openconnect default portViacheslav Hletenko
Change openconnect port as both ocserv and sstp bind by default the same port 443
2022-08-25Merge pull request #1478 from sever-sever/T4622Christian Poessinger
firewall: T4622: Add TCP MSS option
2022-08-24smoketest: bgp: T4634: validate "disable-connected-check" optionChristian Poessinger
2022-08-22bridge: T4632: vlan aware bridge lacks CPU forwardingChristian Poessinger
The VLAN aware bridge was forwarding traffic between member ports, but traffic destined torwards the CPU was dropped. This resulted in a gateway not reachable or DHCP leases that could not be handed out. Tested via: VyOS set interfaces bridge br0 enable-vlan set interfaces bridge br0 member interface eth1 allowed-vlan '10' set interfaces bridge br0 member interface eth1 allowed-vlan '20' set interfaces bridge br0 member interface eth1 allowed-vlan '30' set interfaces bridge br0 member interface eth1 allowed-vlan '40' set interfaces bridge br0 member interface eth1 native-vlan '40' set interfaces bridge br0 member interface eth2 allowed-vlan '30' set interfaces bridge br0 member interface eth2 allowed-vlan '20' set interfaces bridge br0 member interface eth2 allowed-vlan '10' set interfaces bridge br0 member interface eth2 allowed-vlan '40' set interfaces bridge br0 vif 10 address '10.0.10.1/24' set interfaces bridge br0 vif 20 address '10.0.20.1/24' set interfaces bridge br0 vif 30 address '10.0.30.1/24' set interfaces bridge br0 vif 40 address '10.0.40.1/24' Arista vEOS vlan 10,20,30,40 interface Ethernet1 switchport trunk allowed vlan 10,20,30,40 interface Vlan10 ip address 10.0.10.2/24 interface Vlan20 ip address 10.0.20.2/24 interface Vlan30 ip address 10.0.30.2/24 interface Vlan40 ip address 10.0.40.2/24 interface Ethernet1 switchport trunk allowed vlan 10,20,30,40 switchport mode trunk spanning-tree portfast Cisco vIOS interface GigabitEthernet0/0 ip address 10.0.40.3 255.255.255.0 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/0.10 encapsulation dot1Q 10 ip address 10.0.10.3 255.255.255.0 ! interface GigabitEthernet0/0.20 encapsulation dot1Q 20 ip address 10.0.20.3 255.255.255.0 ! interface GigabitEthernet0/0.30 encapsulation dot1Q 30 ip address 10.0.30.3 255.255.255.0 !
2022-08-18firewall: T4622: Add TCP MSS optionViacheslav Hletenko
Ability to drop|accept packets based on TCP MSS size set firewall name <tag> rule <tag> tcp mss '501-1460'
2022-08-15ocserv: openconnect: T4614: add support for split-dnsChristian Poessinger
set vpn openconnect network-settings split-dns <domain>
2022-08-15smoketest: ocserv: implement config file validationChristian Poessinger
2022-08-05nat66: T4598: Add exclude options in nat66Nicolas Fort
2022-08-05bgp: T4257: bugfixes after renaming "local-as" to "system-as"Christian Poessinger
2022-08-04Merge https://github.com/Cheeze-It/vyos-1x into currentChristian Poessinger
* https://github.com/Cheeze-It/vyos-1x: bgp: T4257: Changing BGP "local-as" to "system-as"
2022-08-04smoketest: macsec: T4537: validate macsec_csindex for both AES-GCM-128 and ↵Christian Poessinger
AES-GCM-256
2022-08-04smoketest: macsec: T4537: verify macsec_csindexChristian Poessinger
2022-08-03Merge pull request #1369 from nicolas-fort/T4480Daniil Baturin
T4480: webproxy: Add safe-ports and ssl-safe-ports for acl squid config
2022-07-31smoketest: bridge: T4565: changes to lower interfaces must not destroy VLAN ↵Christian Poessinger
aware bridge
2022-07-30bgp: T4257: Changing BGP "local-as" to "system-as"Cheeze_It
bgp: T4257: Changing BGP "local-as" to "system-as" This change is to change the global BGP name for the node "local-as" to "system-as" This is needed so that there's less ambiguity with the local-as feature per neighbor. bgp: T4257: Changing BGP "local-as" to "system-as" bgp: T4257: Changing BGP "local-as" to "system-as" This change is to change the global BGP name for the node "local-as" to "system-as" This is needed so that there's less ambiguity with the local-as feature per neighbor.
2022-07-25bgp: T4560: neighbor/peer-group local-as option is only allowed for eBGPChristian Poessinger
2022-07-25fastnetmon: T4556: Allow configure white_list_path and populate with ↵Adrian Almenar
hosts/networks that should be ignored.
2022-07-24graphql: T3993: add smoketest for GraphQL key authorizationJohn Estabrook
2022-07-22smoketest: router-advert: T4550: test deprecate-prefix & decrement-lifetime ↵Christian Poessinger
CLI option
2022-07-22smoketest: router-advert: use setUpClass()Christian Poessinger
2022-07-21smoketest: fastnetmon: T4555: add IPv6 supportChristian Poessinger
2022-07-21fastnetmon: T2659: move configuration files to /runChristian Poessinger
2022-07-21fastnetmon: T4555: add IPv6 supportChristian Poessinger
2022-07-20T4480:webproxy: Add safe-ports and ssl-safe-ports for acel squid config -- ↵Nicolas Fort
Fix conflicts
2022-07-19smoketest: telegraf: use generic service availability checkChristian Poessinger
2022-07-15smoketest: component_version: print details on failureJohn Estabrook
2022-07-15smoketest: T4532: Update smoketest flow-accountingViacheslav Hletenko
2022-07-11smoketest: bridge: also test QinQ bridge member interfacesChristian Poessinger
2022-07-10bond: T4522: add ability to specify mii monitor interval via CLIChristian Poessinger
Linux Kernel supports to specify the MII link monitoring frequency in milliseconds. This determines how often the link state of each slave is inspected for link failures. A value of zero disables MII link monitoring. A value of 100 is a good starting point. The default value is 100. set interfaces bonding bond0 mii-mon-interval <n>
2022-07-10smoketest: bond: remove second instance of layer2+3 hash-policy testChristian Poessinger
2022-07-10smoketest: bond: add testcase for conflicting bridge memberChristian Poessinger
A bond member can not also be used as a member of a bridge interface.
2022-07-10smoketest: bond: add testcase for source-interface re-useChristian Poessinger
A bond member is not allowed to also be used as a source interface for e.g. PPPoE or MACsec.
2022-07-09ip: T4517: drop forwarding from CLI "system ip ↵Christian Poessinger
disable-directed-broadcast-forwarding"
2022-07-09ip: T4517: add option to enable directed broadcast forwardingYuxiang Zhu
Directed broadcast is described in rfc1812#section-5.3.5.2 and rfc2644. By default Linux kernel doesn't forward directed broadcast packets unless both of `/proc/sys/net/ipv4/conf/all/bc_forwarding` and `/proc/sys/net/ipv4/conf/$iface/bc_forwarding` are set to 1.
2022-07-07smoketest: T4411: Add influxdb nodeViacheslav Hletenko
2022-07-07smoketest: dns: T4509: use dedicated 6to4 testcaseChristian Poessinger
2022-07-07smoketest: dns: forwarding: use setUpClass()Christian Poessinger
2022-07-07syslog: T4500: Remove max-size from rsyslog leaving rotation to logrotatesarthurdev
After discussion with @zsdc this was decided the better long term fix * Removes hourly logrotate cron in favour of systemd timer override
2022-07-05firewall: T2199: Fix migration when `icmpv6 type` is an integersarthurdev
2022-07-05Merge pull request #1389 from sever-sever/T4509Christian Poessinger
dns: T4509: Add dns64-prefix option
2022-07-05dns: T4509: Add dns64-prefix optionViacheslav Hletenko
rfc6147: DNS Extensions for Network Address Translation from IPv6 Clients to IPv4 Servers set service dns forwarding dns64-prefix 2001:db8:aabb::/96
2022-07-04Merge pull request #1386 from sarthurdev/geoip_negateChristian Poessinger
firewall: T4299: Add ability to inverse match country-codes
2022-07-04firewall: T4299: Add ability to inverse match country codessarthurdev
2022-07-04ntp: T4456: support listening on specified interfaceChristian Poessinger
When clients only use DHCP for interface addressing we can not bind NTPd to an address - as it will fail if the address changes. This commit adds support to bind ntpd to a given interface in addition to a given address. set system ntp interface <name>
2022-07-04smoketest: bridge: T4498: add IGMP testcaseChristian Poessinger
2022-07-04Merge pull request #1385 from sarthurdev/ovpn-test-pkiChristian Poessinger
smoketest: T4485: Add CRL for configtest, add script for configtest PKI objects
2022-07-01smoketest: T4485: Move smoketest PKI generation to vyos-1xsarthurdev
Allows easy creation of test PKI objects using `vyos.pki` module Generates objects for PKI migration tests
2022-07-01smoketest: T2455: add interface smoketestsChristian Poessinger
2022-07-01openvpn: T4485: Add CRL to OpenVPN config testsarthurdev
2022-07-01Merge pull request #1380 from sarthurdev/ovpn-multi-caChristian Poessinger
openvpn: T4485: Accept multiple tls ca-certificate values
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 21:14:46 +0000