| Age | Commit message (Collapse) | Author |
|---|
|
(cherry picked from commit f7b0bc68b7950a6c6e68b9e6708ef8a4b7b9b423)
|
|
address
ISC DHCP server expects a string: "prefix6 2001:db8:290:: 2001:db8:29f:: /64;"
where the IPv6 prefix/range must be :: terminaated with a delegated prefix
length at the end.
This commit changes the validator that the IPv6 address defined on the CLI must
always end with ::. In addition a verify() step is added to check that the
stop address is greater than start address.
|
|
$ touch /tmp/vyos.smoketest.debug
will enable dynamic debugging of the smoketests - showing the appropriate CLI
commands on stdout
(cherry picked from commit 0cb4294fdfe5ae0e0e8fd06436f38b67f16413a2)
|
|
(cherry picked from commit e1450096b4c667a4c33a3fcd8f67ebf6a39d441d)
|
|
>=5.0
random - In kernel 5.0 and newer this is the same as fully-random. In earlier
kernels the port mapping will be randomized using a seeded MD5 hash mix using
source and destination address and destination port.
https://git.netfilter.org/nftables/commit/?id=fbe27464dee4588d906492749251454
(cherry picked from commit 7fe568ca1672f1dfbd2b56ee3ef7a6ab48b03070)
|
|
(cherry picked from commit e50b7afc9d5b727d04933116ccf364a2b9a48c30)
|
|
(cherry picked from commit f5051de4fc034bd95677ef142423e59eae47cd2f)
|
|
(cherry picked from commit 75d553932504c55e710265776e4865a238223e1f)
|
|
(cherry picked from commit fbc846725d7d581f54b2db48a584e4580be3ad00)
|
|
When all the underlay links go down the PE no longer has access to the VxLAN
+overlay.
To prevent blackholing of traffic the server/ES links are protodowned on the PE.
A link can be setup for uplink tracking via the following configuration:
set interfaces ethernet eth0 evpn uplink
(cherry picked from commit 5565f27d15c5e7378e94aae8db8a894a12e25d7b)
|
|
bridge: T6317: add dependency call for wireless interfaces (backport #3430)
|
|
(cherry picked from commit 314901e7b45782fb6266b35b0e788ab7ea1404b8)
|
|
(cherry picked from commit 234f35d8bae71b5d33ad97cdabc236ec6b13c3a2)
|
|
(cherry picked from commit 431443ab3f663a6617008536d2d6d96407aebfcb)
|
|
(cherry picked from commit 92b468b9a0d5eee8484601568227f7c56e71b119)
|
|
(cherry picked from commit 637a73e35ff716441df0430b2308d685707b2ca0)
|
|
(cherry picked from commit 5a82aee95270737aeeee9e6facf1234b61ce436d)
|
|
The netns support currently available on the VyOS CLI is only a
proof-of-technology, we have no real support for any service behind it.
In order to not confuse anyone on the LTS branch we decided to remove the
netns option for interfaces until there is a proper usecase and implementation
available.
|
|
qos: T6225: Fix QoS random-detect policy (backport #3400)
|
|
bgp: T6189: L3VPN connectivity is broken after re-enabling VRF (backport #3392)
|
|
Fix default values for random-detect
Remove dsmakr qdisc from gred cofig because dsmark was deleted from kernel
(cherry picked from commit 0b54c1bc411a21833ec573031cf5ad98fe709a2f)
|
|
pppoe-server: T6234: PPPoE-server pado-delay refactoring (backport #3364)
|
|
When adding and removing VRF instances on the fly it was noticed that the vni
statement under the VRF instance in FRR vanishes. This was caused by a race
condition which was previously designed to fix another bug.
The wierd design of a Python helper below the VRF tree to only generate the
VNI configuration nodes is now gone and all is rendered in the proper place.
(cherry picked from commit e7bb65894f86372dc0f6e8fd39b1628e0a224c68)
|
|
(cherry picked from commit 6bcb201a0e7ee9fea5874b963bd3e727ecec578f)
|
|
(cherry picked from commit 107ee099e82397b31fca8cf1ac3860cbf76f0596)
|
|
(cherry picked from commit 0be0cdb932ca2d7399c026f1f601b56e179cc9c3)
|
|
(cherry picked from commit 9ff74d4370f0a5f66c303074796dab8b1ca5c4a5)
|
|
(cherry picked from commit da40bd2b2a826986de128354ea1bfc041ada0016)
|
|
config
(cherry picked from commit 984c386d11ead8371b7ac381e6c0921473e557ed)
|
|
(cherry picked from commit 78ea623df20b44309cc6ac9848ed18e97fc4ed03)
|
|
T6246: basic haproxy http-check configuration (backport #3325)
|
|
(cherry picked from commit 050f24770aec7a74c1a07ba64cf2cb83afb72f1a)
|
|
(cherry picked from commit d2df08856ddc5a6132544d73e1beb3074a352508)
|
|
(cherry picked from commit 785616393557c4e3f616287de81b61a68ba177ac)
|
|
server certificates
(cherry picked from commit aafe22d08bb38a579dd5075fd27a1b88beeca791)
|
|
to firewall global-optinos
(cherry picked from commit 76dcecafca977b640dd16d8e68c4a050ca1af4fb)
|
|
Added params for configuration red on the shaper policy
(cherry picked from commit 31cd75aec6d035b36537046ae0d034c03009a3fc)
|
|
pppoe-server: T6141: T5364: PPPoE-server add pado-delay without sessions fails (backport #3296)
|
|
fails (#3296)
(cherry picked from commit 6d8336f5ad2d9c4e0f12b54681db2924d6998d2d)
|
|
(cherry picked from commit ecc83562b4d756cc50910561a3f52ec260aeb478)
|
|
There are cloud environments available where the maximum supported ethernet
MTU is e.g. 1450 bytes, thus we clamp this to the adapters maximum MTU value
or 1500 bytes - whatever is lower.
(cherry picked from commit 8296cc727066e739c178918a91cfc11d20d26fe1)
|
|
ipoe: T6205: error in migration script logic while renaming mac-address to mac node (backport #3263)
|
|
Containers have the ability to add Linux system capabilities to them, this is
done using the "set container name <name> cap-add" command.
The CLI node sounds off and rather should be "set container name <name>
capability" instead as we use and pass a capability to a container and not
add/invent new ones.
(cherry picked from commit b30faa43c28b592febd83a7fd3a58247de6b27bc)
|
|
mac node
The problem was introduced in [1] but the config migrator part unfortunately
was added to the wrong version [2]. As IPoE config version 0 was only active
during the 1.3 development cycle and VyOS 1.3.0 was already released with config
version 1 we can safely drop the migrator 0-to-1 and move the code to 1-to-2 to
properly support upgrades from VyOS 1.3 -> 1.4 or newer.
1: https://github.com/vyos/vyos-1x/commit/05df2a5f021f0c7aab7c06db645d210858b6e98d#diff-08291bf77870abe3af8bbe3e8ce4bbf344fd0498b2c5c75a75aa7235d381c88eL168
2: https://github.com/vyos/vyos-1x/commit/05df2a5f021f0c7aab7c06db645d210858b6e98d#diff-b8bb58b75607d3653e74d82eff02442f9f3ab82698f160ba37858f7cdf6c79ccR44-R46
(cherry picked from commit a5ccc06c08d3a9696f1c03c8d0c7de78ce1fd3c5)
|
|
T6199: start validating smoketests against real CLI defaultValues (backport #3266)
|
|
Use vyos.xml_ref.default_value to query XML default values and take them into
account when validating properly applied defaults in individual smoketests
instead of using hardcoded values like 443 for https port.
(cherry picked from commit d9d2e9c8ead29c173fefd1b565d191a85baaa071)
|
|
(cherry picked from commit 489e6fababa60d9c0fbfdb421305cbe563432499)
# Conflicts:
# src/migration-scripts/dhcp-server/9-to-10
# src/migration-scripts/dhcpv6-server/3-to-4
|
|
The option "passive-interface default" was set even if it was not present in
the previous version we are migrating from. Fix migration script to handle this
with a conditional path.
(cherry picked from commit ef8d9a73335bc685084e3ff97238836e452dfa8c)
|
|
(cherry picked from commit d403117cdb5e7718c8590cfeb79a336cb5b67aac)
|
|
T6199: spring cleaning - drop unused Python imports (backport #3240)
|
