summaryrefslogtreecommitdiff
path: root/src/conf_mode/interfaces-ethernet.py
AgeCommit message (Collapse)Author
2022-02-17pki: eapol: T4245: Add full CA and client cert chains to wpa_supplicant PEM ↵Andrew Gunnerson
files This commit updates the eapol code so that it writes the full certificate chains for both the specified CA and the client certificate to `<iface>_ca.pem` and `<iface>_cert.pem`, respectively. The full CA chain is necessary for validating the incoming server certificate when it is signed by an intermediate CA and the intermediate CA cert is not included in the EAP-TLS ServerHello. In this scenario, wpa_supplicant needs to have both the intermediate CA and the root CA in its `ca_file`. Similarly, the full client certificate chain is needed when the ISP expects/requires that the client (wpa_supplicant) sends the client cert + the intermediate CA (or even + the root CA) as part of the EAP-TLS ClientHello. Signed-off-by: Andrew Gunnerson <chillermillerlong@hotmail.com>
2022-02-14pki: eapol: T4244: Fix KeyError when CA cert name differs from client cert nameAndrew Gunnerson
This commit fixes a small typo where the client cert name was being used to index the CA configuration dict. Signed-off-by: Andrew Gunnerson <chillermillerlong@hotmail.com>
2021-09-10ethernet: T3802: use only one implementation for get_driver_name()Christian Poessinger
Move the two implementations to get the driver name of a NIC from ethernet.py and ethtool.py to only ethtool.py. (cherry picked from commit 07840977834816b69fa3b366817d90f44b5dc7a7)
2021-09-06pki: eapol: T3642: only add "pki" key to interface dict if pki is configuredChristian Poessinger
2021-09-06pki: eapol: T3642: use write_file() to store certificatesChristian Poessinger
2021-09-06ifconfig: T3806: "ipv6 address no_default_link_local" required for MTU < 1280Christian Poessinger
This commit also extends the smoketest to verify that the exception for this error is raised.
2021-08-31vyos.ethtool: T3163: purify code to read and change flow-control settingsChristian Poessinger
It makes no sense to have a parser for the ethtool values in ethtool.py and ethernet.py - one instance ios more then enough!
2021-08-31ethernet: T3163: only change ring-buffer settings if requiredChristian Poessinger
Only update the RX/TX ring-buffer settings if they are different from the ones currently programmed to the hardware. There is no need to write the same value to the hardware again - this could cause traffic disruption on some NICs.
2021-08-31ethernet: T2241: check if interface supports changing speed/duplex settingsChristian Poessinger
Not all interface drivers have the ability to change the speed and duplex settings. Known drivers with this limitation are vmxnet3, virtio_net and xen_netfront. If this driver is detected, an error will be presented to the user.
2021-08-31ethernet: T3514: bail out early on invalid adapter speed/duplex settingChristian Poessinger
Ethernet adapters have a discrete set of available speed and duplex settings. Instead of passing every value down to ethtool and let it decide, we can do this early in the VyOS verify() function for ethernet interfaces.
2021-07-20pki: eapol: T3642: Migrate EAPoL to use PKI configurationsarthurdev
2021-02-24ethernet: T3163: not all NIC drivers support ring-buffer configurationChristian Poessinger
In addition to commit cf1156a60e ("ethernet: T3163: probe driver for maximum rx/tx ring-buffer size") this extends the logic in a way as not every driver supports setting the buffers at all so it will properly error out. When invoking "ethtool -g" both stdout and stderr are captured and no exception is raised if it's an unsupported driver feature. The verify() section will inform the user about the illegal operation.
2021-02-21ethernet: T3163: probe driver for maximum rx/tx ring-buffer sizeChristian Poessinger
2021-02-20ethernet: T3342: Xen vif driver requires sg offloading for MTU > 1500 bytesChristian Poessinger
2021-01-07smoketest: ethernet: verify() speed/duplex must both be auto or discreteChristian Poessinger
2021-01-07vyos.configverify: provide generic helper to check for interface existenceChristian Poessinger
2021-01-03mirror: add verify() check so we can not mirror back to our selfChristian Poessinger
2021-01-01ethernet: T3171: add CLI option to enable RPS (Receive Packet Steering)Christian Poessinger
set interfaces ethernet <interface> offload rps
2020-12-29ethernet: T1466: add EAPoL supportChristian Poessinger
2020-12-23xdp: T2666: move CLI node to "interfaces ethernet <eth> xdp"Christian Poessinger
2020-12-23xdp: T2666: require at least 2 TX queuesChristian Poessinger
2020-09-26ifconfig: mtu: disallow MTU < 1280 bytes when IPv6 is enabled on the interfaceChristian Poessinger
Using an MTU less then the required 1280 bytes (as per RFC) on an interface where IPv6 is not explicitly disabled by: - set interfaces ethernet eth1 ipv6 address no-default-link-local - not having any other IPv6 address configured Will now trigger a commit error via verify() instead of raising FileNotFoundError!
2020-09-25ethernet: T2912: verify() that hardware supports specified MTU valueChristian Poessinger
Check the hardware if MTU value is supported at all.
2020-08-31configd: T2582: add scripts to include list for daemonJohn Estabrook
2020-07-25ifconfig: T2653: make ifname an optional argument to get_interface_dict()Christian Poessinger
Further reduce the boiler-plate code to determine interface tag node or not. It can be passed into get_interface_dict() if explicitly required - else it is taken from the environment.
2020-07-25interfaces: ifconfig: T2653: migrate to get_interface_dict() APIChristian Poessinger
After switching from raw parsing of the interface options to get_config_dict() this utilizes another utility function which wraps get_config_dict() and adds other common and reused parameters (like deleted or bridge member). Overall this drops redundant code (again) and makes the rest more maintainable as we only utilize a single function.
2020-07-25bridge: ifconfig: T2653: move to get_config_dict()Christian Poessinger
The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge. While providing a new update() method in vyos.ifconfig.interfaces() this is extended for bridge interfaces in the derived bridge class. Signed-off-by: Christian Poessinger <christian@poessinger.com>
2020-07-25ethernet: ifconfig: T2653: move to get_config_dict()Christian Poessinger
The current VyOS CLI parser code written in Python contains a ton of duplicates which I can also hold myself accountable for - or maybe mainly me - depends on the angle of judge. While providing a new update() method in vyos.ifconfig.interfaces() this is extended for ethernet based interfaces which also supports 802.1q, 802.1ad VLANs. This commit migrates the existing codebase for an ethernet based interfaces and implements the missing parts for VLANs. Adding or migrating other interfaces (e.g. bridge or bond) will become much easier as they must reuse the entire functionality - we now walk towards a single codepath. Thanks for all who made this combined effort possible! Signed-off-by: Christian Poessinger <christian@poessinger.com>
2020-06-24dictconfig: T2637: identify sub-interfaces (vif) to deleteThomas Mangin
2020-05-29Merge pull request #439 from thomas-mangin/T2088-explicit-airbagChristian Poessinger
airbag :T2088: make airbag explicit
2020-05-29airbag: T2088: explicit enabling of the featureThomas Mangin
airbag must now be explicitly installed. the patch also allow to fully disables the installation of the logging code at setup (and not just installing and doing nothing)
2020-05-28ethernet: T2514: add warning when changing mac for bond memberL6NqLW
2020-05-27ethernet: T2476: do not override MAC of lower interface if bond memberL6NqLW
2020-05-26dhcpv6-pd: T2506: add option to request specific prefix lengthChristian Poessinger
Some ISPs (e.g. Comcast) only delegate a /64 by default. You have to explicitly "ask" for a bigger (e.g. /60) prefix. This commit adds a CLI node to request a specific prefix length in the range 32 - 64. dhcpv6-options { prefix-delegation { length 60 } }
2020-05-26dhcpv6-pd: pppoe: T2506: restructure CLIChristian Poessinger
Rename the CLI nodes for prefix delegation from "dhcpv6-options delegate <interface>" to "dhcpv6-options prefix-delegation interface <interface>". The change is required to add the possibility to request for specific prefix sized via the CLI. That option was not possible with the old configuration tree.
2020-05-26dhcpv6-pd: ethernet: T421: fix TypeErrorChristian Poessinger
Copy/paste error resulting in: Traceback (most recent call last): File "/usr/libexec/vyos/conf_mode/interfaces-ethernet.py", line 303, in <module> apply(c) File "/usr/libexec/vyos/conf_mode/interfaces-ethernet.py", line 205, in apply e.dhcp.v6.options['dhcpv6_pd'] = e['dhcpv6_pd'] TypeError: 'EthernetIf' object is not subscriptable
2020-05-19dhcpv6-pd: T421: support ethernet based interfacesChristian Poessinger
Add support for prefix delegation when receiving the prefix via ethernet, bridge, bond, wireless.
2020-05-19configdict: T2372: interfaces must reuse interface_default_dataChristian Poessinger
This is to remove the amount of duplicated entries in dictionaries. It's one more part to move to a unified interface management.
2020-05-11ethernet: T2449: set accept_ra on ethernet interfacesJernej Jakob
2020-05-05ethernet: T2427: move VLAN adding to common functionJernej Jakob
2020-05-04ethernet: T2241: fix falling out of bridge when changing settingsJernej Jakob
Previously, set_vrf was always called, which uses the same master and nomaster commands as bridge, so it removed the interface from the bridge. - add checks to make VRF and bridge membership mutually exclusive - always re-add the interface back to any bridge it is part of
2020-05-04ethernet: T2241: make address and bond membership exclusiveJernej Jakob
Bond members should not have any addresses assigned.
2020-05-04ethernet: T2241: make VRF and bond/bridge membership mutually exclusiveJernej Jakob
2020-05-04ethernet: T2241: add checks for bridge and bond membershipJernej Jakob
2020-05-04configdict: T2241: get interface name in intf/vlan_from_dictJernej Jakob
This is needed as later functions depend on it
2020-05-02ethernet: T2372: deal with disabled parent intfThomas Mangin
use intf_to_dict and add_to_dict to correctly implement disable.
2020-04-23interfaces: T2362: add node to delete the default IPv6 link-local addressJernej Jakob
2020-04-23interfaces: T2362: allow setting multiple 'ipv6 address eui64'Jernej Jakob
2020-04-23interfaces: T2362: delete and re-add all EUI64 addresses if MAC has changedJernej Jakob
2020-04-23interfaces: T2362: add default IPv6 link-local address to make IPv6 workJernej Jakob