| Age | Commit message (Collapse) | Author |
|---|
|
Keep all FRRender stuff in one place.
|
|
|
|
|
|
When running under vyos-configd only a single apply() is done as last step in
the commit algorithm. FRRender class address is provided via an attribute from
vyos-configd process.
|
|
With FRR 10.0 daemons started to be migrated to integrated FRR mgmtd and a
northbound interface. This led to some drawbacks in the current state how
changes to FRR are handled. The current implementation will use frr-reload.py
and specifies excatly WHICH daemon needs a config update and will only replace
this part inside FRR.
With FRR10 and mgmtd when a partial configuration is sent to mgmtd, it will
remove configuration parts from other daemons like bgpd or ospfd which have
not yet been migrated to mgmtd.
It's not possible to call frr-reload.py with daemon mgmtd - it will error out.
This commit will also change the CLI for static routes:
CLI command "set protocols static route 10.0.0.0/8 next-hop 1.2.3.4 bfd multi-hop
source 1.1.1.1" will be split into:
* set protocols static route 10.0.0.0/8 next-hop 1.2.3.4 bfd source-address 1.1.1.1
* set protocols static route 10.0.0.0/8 next-hop 1.2.3.4 bfd multi-hop
To make the XML blocks reusable, and comply with the FRR CLI - this was actually
a wrong implementation from the beginning as you can not have multiple BFD
source addresses.
CLI command "set protocols static route 10.0.0.0/8 next-hop 1.2.3.4 bfd multi-hop
source 1.1.1.1 profile bar" is changed to:
* set protocols static route 10.0.0.0/8 next-hop 1.2.3.4 bfd profile bar
CLI commands "set protocols static multicast interface-route" is moved to:
* set protocols static multicast route <x.x.x.x/x> interface
To have an identical look and feel with regular static routes.
|
|
|
|
The function verify_interface_exists requires a reference to the ambient
config_dict rather than creating an instance. As access is required to
the 'interfaces' path, provide as attribute of class ConfigDict, so as
not to confuse path searches of script-specific config_dict instances.
|
|
* T5195: move run, cmd, call, rc_cmd helper to vyos.utils.process
* T5195: use read_file and write_file implementation from vyos.utils.file
Changed code automatically using:
find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import read_file$/from vyos.utils.file import read_file/g' {} +
find . -type f -not -path '*/\.*' -exec sed -i 's/^from vyos.util import write_file$/from vyos.utils.file import write_file/g' {} +
* T5195: move chmod* helpers to vyos.utils.permission
* T5195: use colon_separated_to_dict from vyos.utils.dict
* T5195: move is_systemd_service_* to vyos.utils.process
* T5195: fix boot issues with missing imports
* T5195: move dict_search_* helpers to vyos.utils.dict
* T5195: move network helpers to vyos.utils.network
* T5195: move commit_* helpers to vyos.utils.commit
* T5195: move user I/O helpers to vyos.utils.io
|
|
|
|
|
|
|
|
|
|
|
|
In this commit we added ethernet sub interface MPLS enablement. Per request by
@bbs2web, this functionality is now possible. This should now allow ethernet
switched networks with VLAN tags to also allow for MPLS packet flow.
|
|
|
|
|
|
|
|
Also drop the Python2 print formatting code in favour of Python3 formatted
strings.
|
|
global features
So this is a big update.
The first thing that was done was a refactor to the FRR LDP template, MPLS handler, and XML conf tree MPLS global additions.
The refactors should work and I did test them in my lab. It seems that everything does work as needed so far in my testing.
There is something here that is considered configuration breaking from the old setup though. In the old setup the MPLS interface operation (as in the interfaces accepting MPLS labels and processing them) was tied with LDP. What this means is that MPLS processing was enabled at the same time as LDP interfaces were configured. We do not want this behavior for the future as there's other MPLS underlay technologies like SR and RSVP. If someone wants to enable SR or RSVP without enabling LDP then they now can. Before, they couldn't. The other additions are global changes to MPLS TTL propagation and MPLS max TTL enforcement. They have now been added.
Lastly, there is an frr-reload bug that Runar Borge found with this. We have found that when totally deleting LDP that there has to be 3 commits done. This is because frr-reload doesn't properly do what it needs to do in 1 operation so we had to do 3. This will only affect people that are doing an entire LDP clear using "delete protocols mpls ldp." Otherwise it isn't seen.
Anyway, this refactor now works with the FRR daemon directly for all changes. This also makes it much easier for adding stuff in the future.
Thank you
|
|
This commit has to do with the addition of miscellaneous MPLS parameters, as well as miscellaneous LDP parameters. Per c-po, for miscellaneous options and whatnot that do not fit anywhere we will put them into a specific "parameters" node.
I also did some global linux configuration changes here. We make changes to kernel options "net.mpls.ip_ttl_propagate" and "net.mpls.default_ttl" which should allow the behavior of VyOS to have the same as routers from the big vendors.
I added two LDP options for cisco interoperation TLV and for a dual stack preference.
Lastly, I went through and changes some of the help/description fields in the definitions page because I just felt they weren't uniform and the words seemed to not properly explain what they were doing. I also did some code clean up (or tried to...) with comments and whatnot.
|
|
The commit has to do with the addition of targeted LDP neighbors and parameters being added. FRR allows for this functionality and I just wanted to add it.
We have basically 4 options that are added. Enabling targeted LDP functionality, the targeted neighbor, the hello interval of targeted sessions, and the hold time of targeted sessions. Both IPv4 and IPv6 has been coded in.
|
|
The commit has to do with the addition of session hold time parameter for LDP neighbors. This allows for being able to change said hold time on a static neighbor.
The way that this works is to have it either delegated to a value (15-65535), or to just be default to whatever FRR stipulates or per the other session configuration values.
I opted to remove the "-ipv4-" only because we know it's an IPv4 session that one has to create first. I figure it's redundant to add it there so I removed it.
|
|
The commit has to do with the addition of TTL security for LDP neighbors. The code was 90% done by Viascheslav. I modified it a little bit to get it to properly work.
We added more parameters to the neighbors dynamic loop. Once this is merged then we should be able to add more for the dynamic neighbor statements.
The way that this works is to have either TTL disabled, or to add the amount of hops accepted for the neighbor.
|
|
The commit has to do with separating the hello/hold timers from being only IPv4 to being both IPv4 and IPv6.
I renamed the existing hello and hold timers with an "-ipv4" and added ones that were "-ipv6". I did verify that the commands properly commit under FRR as well. I also added some room on the protocols_mpls.py file for the different variables as it seems we're might end up having longer names. Removed some spaces that I found too that weren't needed on ldpd.frr.tmpl as well.
|
|
|
|
|
|
|
|
|
|
airbag must now be explicitly installed.
the patch also allow to fully disables the installation of the logging
code at setup (and not just installing and doing nothing)
|
|
|
|
convert all call to jinja to use template.render
|
|
os.system does print the ouput of the command, run() does not.
A new function called call() does the printing and return the error code.
|
|
As little change a possible but the function call
The behaviour should be totally unchanged.
|
|
|
|
|
