Age | Commit message (Collapse) | Author |
|
mdns: T5723: Always reload systemd daemon before applying changes
|
|
Additionally, templatize system service override and move it to the
runtime path.
|
|
T5559: Add static neighbor-proxy feature
|
|
If we add a new interface for PPPoe-server we MUST restart the
`accel-ppp@pppoe.service` as `reload` is not implemented for
accel-ppp daemon
Otherwise we have listen interface in the /run/accel-pppd/pppoe.conf
which does not work
|
|
vxlan: T3700: add bridge dependency call when altering member interfaces
|
|
Commit 7f6624f5a6f8bd ("vxlan: T3700: support VLAN tunnel mapping of VLAN aware
bridges") added support for Single VXLAN Device (SVD) containers supported by
the Linux Kernel.
When working with bridge VIFs it turned out that when deleting a VIF all the
VXLAN tunnel mappings got deleted, too. In order to avoid this, if the bridge
has a VXLAN member interface which vlan-to-vni mapping enabled, we add a
dependency that we call VXLAN conf-mode script after messing arround with the
bridge VIFs and re-create tunnel mappings.
|
|
- Migrate to ddclient 3.11.1 and enforce debian/control dependency
- Add dual stack support for additional protocols
- Restrict usage of `porkbun` protocol, VyOS configuration structure
isn't compatible with porkbun yet
- Improve and cleanup error messages
|
|
`web-options` is only applicable when using HTTP(S) web request to
obtain the IP address. Apply guard for that.
|
|
wireguard: T5707: remove previously deconfigured peer
|
|
Changing the public key of a peer (updating the key material) left the old
WireGuard peer in place, as the key removal command used the new key.
WireGuard only supports peer removal based on the configured public-key, by
deleting the entire interface this is the shortcut instead of parsing out all
peers and removing them one by one.
Peer reconfiguration will always come with a short downtime while the WireGuard
interface is recreated.
|
|
T5698 EVPN ESI Multihoming
|
|
Ability to set ip neigbhor proxy
set protocols static neighbor-proxy arp 192.0.2.1 interface 'eth0'
set protocols static neighbor-proxy arp 192.0.2.2 interface 'eth0'
set protocols static neighbor-proxy nd 2001:db8::1 interface 'eth1'
|
|
T1797: Delete VPP from vyos-1x as it is implemented in addon
|
|
vxlan: T5668: add CLI knob to enable ARP/ND suppression
|
|
As we have a bunch of options under "paramteres" already and "external" is
clearly one of them it should be migrated under that node as well.
|
|
In order to minimize the flooding of ARP and ND messages in the VXLAN network,
EVPN includes provisions [1] that allow participating VTEPs to suppress such
messages in case they know the MAC-IP binding and can reply on behalf of the
remote host. In Linux, the above is implemented in the bridge driver using a
per-port option called "neigh_suppress" that was added in kernel version 4.15.
[1] https://www.rfc-editor.org/rfc/rfc7432#section-10
|
|
set interfaces bonding bond10 evpn es-df-pref '50'
set interfaces bonding bond10 evpn es-id '10'
set interfaces bonding bond10 evpn es-sys-mac '01:23:45:67:89:ab'
set interfaces bonding bond10 member interface 'eth3'
set interfaces bonding bond10 mode '802.3ad'
|
|
T5681: Firewall,Nat and Nat66: simplified and standarize interface matcher
|
|
(valid for interfaces and groups) in firewal, nat and nat66.
|
|
The current named for certificates are hardcoded in generated config to:
- ca.pem
- cert.pem.key
- cert.pem
It cause a generated config certificates and certificates itself
are different (test-cert-1.pem and ca.pem)
bind :::8080 v4v6 ssl crt /run/haproxy/test-cert-1.pem
/run/haproxy/ca.pem
It is a bug of initial impelemtation. Fix required correct names
from PKI certificates
|
|
T5643: nat: add interface-groups to nat. Use same cli structure for i…
|
|
vxlan: T5671: change port to IANA assigned default port
|
|
|
|
T5541: firewall zone: re add firewall zone-base firewall
|
|
|
|
pmacct: T5232: Fixed pmacct service control via systemctl
|
|
|
|
pmacct daemons have one very important specific - they handle control signals in
the same loop as packets. And packets waiting is blocking operation.
Because of this, when systemctl sends SIGTERM to uacctd, this signal has no
effect until uacct receives at least one packet via nflog. In some cases, this
leads to a 90-second timeout, sending SIGKILL, and improperly finished tasks.
As a result, a working folder is not cleaned properly.
This commit contains several changes to fix service issues:
- add a new nftables table for pmacct with a single rule to get the ability to
send a packet to nflog and unlock uacctd
- remove PID file options from the uacctd and a systemd service file. Systemd
can detect proper PID, and PIDfile is created by uacctd too late, which leads
to extra errors in systemd logs
- KillMode changed to mixed. Without this, SIGTERM is sent to all plugins and
the core process exits with status 1 because it loses connection to plugins too
early. As a result, we have errors in logs, and the systemd service is in a
failed state.
- added logging to uacctd
- systemctl service modified to send packets to specific address during a service
stop which unlocks uacctd and allows systemctl to finish its work properly
|
|
bonding: T5254: Fixed changing ethernet when it is a bond member
|
|
interface-name|interface-group as in firewall.
|
|
T5165: Implement policy local-route source and destination port
|
|
|
|
T5530: isis: Adding loop free alternate feature
|
|
pppoe: T5630: allow to specify MRU in addition to already configurable MTU
|
|
Add `policy local-route` source and destination port
set policy local-route rule 23 destination port '222'
set policy local-route rule 23 protocol 'tcp'
set policy local-route rule 23 set table '123'
set policy local-route rule 23 source port '8888'
% ip rule show prio 23
23: from all ipproto tcp sport 8888 dport 222 lookup 123
|
|
|
|
This reverts commit 64d323299586da646ca847e78255ff2cd8464578.
|
|
|
|
During system startup the system-login.py script is invoked by vyos-router
systemd service. As there is no complete configuration available at this
point in time - and the sole purpose of this call is to reset/re-render
the system NSS/PAM configs back to default - it accidently also deleted the
local useraccounts.
Once the VyOS configuration got mounted, users got recreated in alphabetical
order and thus UIDs flipped and the /home suddenely belonged to a different
account.
This commit prevents any mangling with the local userdatabase during VyOS
bootup phase.
|
|
If ethernet interface is a bond memeber:
1. Allow for changing only specific parameters which are specified
in EthernetIf.get_bond_member_allowed_options function.
2. Added inheritable parameters from bond interface to ethernet
interface which are scpecified
in BondIf.get_inherit_bond_options.
Users can change inheritable options under ethernet interface
but in commit it will be copied from bond interface.
3. All other parameters are denied for changing.
Added migration script. It deletes all denied parameters under
ethernet interface if it is a bond member.
|
|
Add support for per-service cache management for ddclient providers
via `wait-time` and `expiry-time` options. This allows for finer-grained
control over how often a service is updated and how long the hostname
will be cached before being marked expired in ddclient's cache.
More specifically, `wait-time` controls how often ddclient will attempt
to check for a change in the hostname's IP address, and `expiry-time`
controls how often ddclient to a forced update of the hostname's IP
address.
These options intentionally don't have any default values because they
are provider-specific. They get treated similar to the other provider-
specific options in that they are only used if defined.
|
|
T5165: Migrate policy local-route rule x destination to address
|
|
ddclient: T5612: Miscellaneous improvements and fixes for dynamic DNS
|
|
Migrate policy local-route <destination|source> to node address
replace 'policy local-route{v6} rule <tag> destination|source <x.x.x.x>'
=> 'policy local-route{v6} rule <tag> destination|source address <x.x.x.x>'
|
|
Fixes `KeyError: 'conntrack_sync'`
Ignore `ConfigError("ConfigError('Interface eth1 requires an IP address!')")` due to calling conntrack-sync too early
|
|
T5577: Optimized PAM configs for RADIUS/TACACS+
|
|
|
|
Rename avahi-daemon config file to avahi-daemon.conf.j2 to match the
convention used by other config files.
|
|
This commit adds a new configuration option to the mDNS repeater service
to allow controlling which IP version to use for mDNS repeater.
Additionally, publishing AAAA record over IPv4 and A record over IPv6 is
disabled as suggested.
See:
- https://github.com/lathiat/avahi/issues/117#issuecomment-1651475104
- https://bugzilla.redhat.com/show_bug.cgi?id=669627#c2
|
|
T5217: Add firewall synproxy
|