summaryrefslogtreecommitdiff
path: root/src/conf_mode
AgeCommit message (Collapse)Author
2024-01-01Merge pull request #2728 from c-po/verify-T5880Viacheslav Hletenko
T5880: verify_source_interface() should not allow dynamic interfaces like ppp, l2tp, ipoe or sstpc client interfaces
2024-01-01tunnel: T5879: properly verify source-interface used for tunnelsChristian Breunig
A tunnel interface can not properly be sourced from a pppoe0 interface when such interface is not (yet) connected to the BRAS. It might work on a running system, but subsequent reboots will fail as the source-interface most likely does not yet exist.
2024-01-01login: T5875: restore home directory permissions only when neededChristian Breunig
This improves commit 3c990f49e ("login: T5875: restore home directory permissions when re-adding user account") in a way that the home directory owner is only altered if it differs from the expected owner. Without this change on every boot we would alter the owner which could increase the boot time if the home of a user is cluttered.
2023-12-31T5474: establish common file name pattern for XML conf mode commandsChristian Breunig
We will use _ as CLI level divider. The XML definition filename and also the Python helper should match the CLI node. Example: set interfaces ethernet -> interfaces_ethernet.xml.in set interfaces bond -> interfaces_bond.xml.in set service dhcp-server -> service_dhcp-server-xml.in
2023-12-31Merge pull request #2696 from indrajitr/kea-lfc-fixChristian Breunig
dhcp: T3316: Adjust kea lease files' location and permissions
2023-12-30Merge pull request #2716 from c-po/login-t5875Christian Breunig
login: T5875: restore home directory permissions when re-adding user account
2023-12-29system: T5877: Shorten system domain-search config pathIndrajit Raychaudhuri
Shorten and simplify `system domain-search` config path from: ``` set system domain-search domain <domain1> ``` to: ``` set system domain-search <domain1> ``` This will shorten the path and also make consistent with `domain-search` config in other places (like `dhcp-server`).
2023-12-29login: T5875: restore home directory permissions when re-adding user accountChristian Breunig
After deleting a user account and working with a newly added account, we see that after rebooting in the previously saved configuration, the user is re-added but it's home directory might have an old UID set on the filesystem. This is due to the fact that vyos config does not store UIDs. When adding a user account to the system we now check if the home directory already exists and adjust the ownership to the new UID.
2023-12-29nat: T5681: relax wording on non existing interface Warning messageChristian Breunig
Remove the word "error" from a Warning only message to not irritate the user.
2023-12-29dhcp: T3316: Adjust kea lease files' location and permissionsIndrajit Raychaudhuri
Move the kea lease file to a separate directory `/config/dhcp` that `kea` process can write to so that subprocesses spawned by `kea` process can operate on the lease files. To allow `kea` process to write to `/config/dhcp`, add `_kea` user to `vyattacfg` group. And the lease files are owned completely by `_kea` user to play well with `kea-lfc` process. Specifically, this is necessary for `kea-lfc` which is spawned by `kea` process to clean up expired leases. Since `kea-lfc` creates additional backup lease files, it needs write access to the lease file directory. Additionally, change the extension of the lease file from `.leases` to `.csv` to reflect the actual file format.
2023-12-28container: T5867: disable healthchecks due to upstream issueChristian Breunig
conmon 402de34b31388b5a2e1c <error>: Unable to send container stderr message to parent Broken pipe https://github.com/containers/conmon/issues/438
2023-12-28container: T5829: fix base key "container" re-use in for loopChristian Breunig
2023-12-28container: T5829: verify container network used supports the given AFIChristian Breunig
2023-12-28Merge pull request #2658 from aapostoliuk/T5801-circinusChristian Breunig
T5801: Rewritten L2TP to get_config_dict
2023-12-28Merge pull request #2695 from aapostoliuk/T5842-circinusChristian Breunig
T5842: Rewritten PPTP to get_config_dict
2023-12-28Merge pull request #2650 from indrajitr/kea-reservation-fixChristian Breunig
dhcp: T3316: Support hostname, DUID and MAC address in reservation
2023-12-27T5842: Rewritten PPTP to get_config_dictaapostoliuk
Rewritten PPTP to get_config_dict Fixed 'dynamic-author' commands. These commands did not create anything in accel-ppp config.
2023-12-26ddclient: T5144: Warn against configuration with broken IP lookup serviceIndrajit Raychaudhuri
We always enable HTTPS in ddclient configuration, however `http://checkip.dyndns.org` is HTTP only and does not support HTTPS. Warn the user if they are using this service. Also, make `url` in `web-options` mandatory.
2023-12-25snmp: T5855: migrate "set service lldp snmp enable" to "set service lldp snmp"Christian Breunig
2023-12-24Merge pull request #2682 from c-po/node-changed-t5837Christian Breunig
configdict: T5837: add support to return added nodes when calling node_changed()
2023-12-24Merge pull request #2683 from c-po/snmp-T5865Viacheslav Hletenko
snmp: 5856: fix service removal error
2023-12-24snmp: 5856: fix service removal errorChristian Breunig
When deleting SNMP from CLI the 'delete' key was not honored in the config dictionary, leading to a false process startup causing the following error: Job for snmpd.service failed because the control process exited with error code. See "systemctl status snmpd.service" and "journalctl -xeu snmpd.service" for details.
2023-12-24T5837: cleanup use of calls to vyos.configdict.node_changed()Christian Breunig
node_changed() will return a list of changed keys under "path". We are not always interested what changed, sometimes we are only interested if something changed at all, that what vyos.configdict.is_node_changed() is for.
2023-12-24T160: NAT64 add match firewall mark featureViacheslav Hletenko
Match mark allows to use firewall marks of packet to use a specific pool Example of instance config /run/jool/instance-100.json ``` ... "pool4": [ { "protocol": "TCP", "prefix": "192.0.2.10", "port range": "1-65535", "mark": 23 }, ... ```
2023-12-22T5840: Add override for systemd kea-ctrl-agent.serviceViacheslav Hletenko
After update KEA to 2.4.x in the bf04cd8fea44d375fb7d93d75a1f31c220730c88 there is a file that expects ConditionFileNotEmpty=/etc/kea/kea-api-password It cause the unit `kea-ctrl-agent.service` cannot start systemd[1]: kea-ctrl-agent.service - Kea Control Agent was skipped because of an unmet condition check (ConditionFileNotEmpty=/etc/kea/kea-api-password) Override systemd kea-ctrl-agent.service do not check this file
2023-12-21dhcp: T3316: Support hostname, DUID and MAC address in reservationIndrajit Raychaudhuri
Reinstate support for hostname in DHCP reservation. Having `hostname` in allows for server-side assignment of hostname. This is useful for static lookup of hostname. Ensure that hostname is a valid FQDN (doesn't have underscore, etc.) Additionally, support using either of DUID or MAC address for reservation. While MAC address is typically used for IPv4, and DUID is typically used for IPv6, either of them can be used in IPv4 and IPv6 reservations in Kea.
2023-12-21Merge pull request #2663 from c-po/srv6-part2Christian Breunig
srv6: T591: enable SR enabled packet processing on defined interfaces
2023-12-21Merge pull request #2665 from c-po/ndp-proxyChristian Breunig
T2898: add ndp-proxy service
2023-12-20T2898: add ndp-proxy serviceChristian Breunig
VyOS CLI command set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static' Will generate the following NDP proxy configuration $ cat /run/ndppd/ndppd.conf # autogenerated by service_ndp-proxy.py # This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route route-ttl 30000 # This sets up a listener, that will listen for any Neighbor Solicitation # messages, and respond to them according to a set of rules proxy eth0 { # Turn on or off the router flag for Neighbor Advertisements router no # Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds) timeout 500 # Control how long a valid or invalid entry remains in the cache (milliseconds) ttl 30000 # This is a rule that the target address is to match against. If no netmask # is provided, /128 is assumed. You may have several rule sections, and the # addresses may or may not overlap. rule 2001:db8::/64 { static } }
2023-12-20srv6: T591: enable SR enabled packet processing on defined interfacesChristian Breunig
The Linux Kernel needs to be told if IPv6 SR enabled packets whether should be processed or not. This is done using /proc/sys/net/conf/<iface>/seg6_* variables: seg6_enabled - BOOL Accept or drop SR-enabled IPv6 packets on this interface. Relevant packets are those with SRH present and DA = local. 0 - disabled (default) not 0 - enabled Or the VyOS CLI command: * set protocols segment-routing interface eth0 srv6
2023-12-20vrf: T591: define sysctl setting for net.vrf.strict_modeChristian Breunig
Enable/Disable VRF strict mode, when net.vrf.strict_mode=0 (default) it is possible to associate multiple VRF devices to the same table. Conversely, when net.vrf.strict_mode=1 a table can be associated to a single VRF device. A VRF table can be used by the VyOS CLI only once (ensured by verify()), this simply adds an additional Kernel safety net, but a requirement for IPv6 segment routing headers.
2023-12-20https api: T5844: issue a warning about the classic API unavailabilityDaniil Baturin
when no API keys are set
2023-12-20T5801: Rewritten L2TP to get_config_dictaapostoliuk
Rewritten L2TP to get_config_dict Rewritten L2TP xml to accel-ppp patterns Migrated 'idle' to 'ppp-options.lcp-echo-timeout' Migrated 'authentication.mppe' to 'ppp-options.mppe' Migrated 'authentication.radius.dae-server' to 'authentication.radius.dynamic-author' Migrated 'authentication.require' to 'authentication.protocol' Added 'authentication.radius.acct-interim-jitter' Added 'authentication.radius.preallocate-vif' Added 'authentication.radius.server.<IP>.acct-port' Added 'ppp-options.ipv4' Added smoke-tests Fixed 'preallocate-vif' in SSTP
2023-12-17dhcp: T3316: Kea DHCP and DHCPv6 fixessarthurdev
* Move Kea socket permission change on-demand and speed up conf scripts * Fix issue with DHCP reservations when no `ip-address` value
2023-12-15Merge pull request #2639 from c-po/frr-t4020Viacheslav Hletenko
frr: T4020: add option to define number of open file descriptors
2023-12-15frr: T4020: add option to define number of open file descriptorsChristian Breunig
This allows the operator to control the number of open file descriptors each daemon is allowed to start with. The current assumed value on most operating systems is 1024. If the operator plans to run bgp with several thousands of peers then this is where we would modify FRR to allow this to happen. set system frr descriptors <n>
2023-12-14T5823: Add recursive_defaults for BGP get_config dictionaryViacheslav Hletenko
Add recursive_defaults values for BGP "get_config" dictionary.
2023-12-14Merge pull request #2627 from sever-sever/T4163Christian Breunig
T4163: Add BGP Monitoring Protocol BMP feature
2023-12-14Merge pull request #2590 from sever-sever/T5798Christian Breunig
T5798: load-balancing revese-proxy add multiple SSL certificates
2023-12-14T4163: Add BGP Monitoring Protocol BMP featureViacheslav Hletenko
Add BMP feature. BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring data from BGP routers to network management entities https://docs.frrouting.org/en/latest/bmp.html Example: set system frr bmp commit run restart bgp set protocols bgp system-as '65001' set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast set protocols bgp neighbor 192.0.2.11 remote-as '65001' set protocols bgp bmp mirror-buffer-limit '256000000' set protocols bgp bmp target foo address '127.0.0.1' set protocols bgp bmp target foo port '5000' set protocols bgp bmp target foo min-retry '1000' set protocols bgp bmp target foo max-retry '2000' set protocols bgp bmp target foo mirror set protocols bgp bmp target foo monitor ipv4-unicast post-policy set protocols bgp bmp target foo monitor ipv4-unicast pre-policy set protocols bgp bmp target foo monitor ipv6-unicast post-policy set protocols bgp bmp target foo monitor ipv6-unicast pre-policy
2023-12-13Merge pull request #2606 from c-po/srv6Christian Breunig
SRv6: T591: initial implementation to support locator definition
2023-12-11ddclient: T5791: Adjust the warning messages and minor refactoringIndrajit Raychaudhuri
2023-12-11srv6: T591: initial implementation to support locator definitionChristian Breunig
VyOS CLI set protocols segment-routing srv6 locator bar prefix '2001:b::/64' set protocols segment-routing srv6 locator foo behavior-usid set protocols segment-routing srv6 locator foo prefix '2001:a::/64' Will generate in FRR segment-routing srv6 locators locator bar prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16 exit ! locator foo prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16 behavior usid exit ! exit ! exit ! exit
2023-12-11bgp: T591: add SRv6 support from FRRChristian Breunig
set protocols bgp sid vpn per-vrf export '99' set protocols bgp srv6 locator 'foo' set protocols bgp system-as '100' Will generate in FRR config router bgp 100 no bgp ebgp-requires-policy no bgp default ipv4-unicast no bgp network import-check ! segment-routing srv6 locator foo exit sid vpn per-vrf export 99 exit
2023-12-10T5791: DNS dynamic exclude check for dynamic interfaces PPPoEViacheslav Hletenko
Dynamic interfaces such as PPPoE/sstpc can not exist during verification dns dynamic. As they added and removed dynamically. Add interface_filter to exclude them from checks
2023-12-09Merge pull request #1960 from sarthurdev/keaChristian Breunig
dhcp: T3316: Migrate dhcp/dhcpv6 server to Kea
2023-12-08Merge pull request #2584 from c-po/T4943-google-authenticatorChristian Breunig
login: T4943: use pam-auth-update to enable/disable Google authenticator
2023-12-08T5798: load-balancing revese-proxy add multiple SSL certificatesViacheslav Hletenko
Add ability to configure multiple SSL certificates for frontend/service set load-balancing reverse-proxy service web mode http set load-balancing reverse-proxy service web port 443 set load-balancing reverse-proxy service web ssl certificate cert1 set load-balancing reverse-proxy service web ssl certificate cert2
2023-12-08login: T4943: use pam-auth-update to enable/disable Google authenticatorChristian Breunig
The initial version always enabled Google authenticator (2FA/MFA) support by hardcoding the PAM module for sshd and login. This change only enables the PAM module on demand if any use has 2FA/MFA configured. Enabling the module is done system wide via pam-auth-update by using a predefined template. Can be tested using: set system login user vyos authentication plaintext-password vyos set system login user vyos authentication otp key 'QY735IG5HDHBFHS5W7Y2A4EM274SMT3O' See https://docs.vyos.io/en/latest/configuration/system/login.html for additional details.
2023-12-08dhcp: T3316: Migrate dhcp/dhcpv6 server to Keasarthurdev
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-10 03:20:48 +0000