| Age | Commit message (Collapse) | Author |
|---|
|
(cherry picked from commit 8500e8658ff10f52739143fd7814cf60c9195f16)
|
|
T6672: Fix system option ssh-client source-interface (backport #4000)
|
|
Wireless devices are subject to regulations issued by authorities. For any
given AP or router, there will most likely be no case where one wireless NIC is
located in one country and another wireless NIC in the same device is located
in another country, resulting in different regulatory domains to apply to the
same box.
Currently, wireless regulatory domains in VyOS need to be configured per-NIC:
set interfaces wireless wlan0 country-code us
This leads to several side-effects:
* When operating multiple WiFi NICs, they all can have different regulatory
domains configured which might offend legislation.
* Some NICs need additional entries to /etc/modprobe.d/cfg80211.conf to apply
regulatory domain settings, such as: "options cfg80211 ieee80211_regdom=US"
This is true for the Compex WLE600VX. This setting cannot be done
per-interface.
Migrate the first found wireless module country-code from the wireless
interface CLI to: "system wireless country-code"
(cherry picked from commit 9e22ab6b2aee48029d3455f65880e45c558cf1da)
|
|
Fix for system option ssh-client source-interface
For the `verify_source_interface` the key `ifname` if required
(cherry picked from commit f453b33a6056de8fc5145ca9e680361fbce68348)
# Conflicts:
# smoketest/scripts/cli/test_system_option.py
|
|
(cherry picked from commit 663e468de2b431f771534b4e3a2d00a5924b98fe)
|
|
The function verify_interface_exists requires a reference to the ambient
config_dict rather than creating an instance. As access is required to
the 'interfaces' path, provide as attribute of class ConfigDict, so as
not to confuse path searches of script-specific config_dict instances.
(cherry picked from commit 5f23b7275564cfaa7c178d320868b5f5e86ae606)
|
|
(cherry picked from commit ed63c9d1896a218715e13e1799fc059f4561f75e)
|
|
(cherry picked from commit 9979afa15650bd609399030da1751488baaac70b)
|
|
(cherry picked from commit 0162a27952d2166583a9e6aee2cd77b9c693062b)
|
|
(cherry picked from commit d5ae708581d453e2205ad4cf8576503f42e262b6)
|
|
(cherry picked from commit 4acad3eb8d9be173b76fecafc32b0c70eae9b192)
|
|
T6619: Remove the remaining uses of per-protocol FRR configs (backport #3916)
|
|
Functions called from config scripts outside of the standard functions
get_config/verify/generate/apply will not be called when run under
configd. Move as appropriate for the general config script structure and
the specific script requirements.
(cherry picked from commit aeb51976ea23d68d35685bdaa535042a05016185)
Co-authored-by: John Estabrook <jestabro@vyos.io>
|
|
(cherry picked from commit 31de01242a26dff8ff993061ea2f86102a8a7493)
Co-authored-by: John Estabrook <jestabro@vyos.io>
|
|
Move the remaining calls to check_kmod within a standard function,
with placement determined by the needs of the config script.
(cherry picked from commit 95eef73f1b002c8b9e8e769135ffed50c8ca6890)
|
|
(cherry picked from commit f2256ad338fc3fbaa9a5de2c0615603cd23e0f94)
|
|
(cherry picked from commit 4055090a8d4fd64288eab7ae41aa9440f5de4ece)
|
|
ports
* Created op-mode command "restart serial console"
* Relocated service control to vyos.utils.serial helpers, used by conf- and
op-mode serial console handling
* Checking for logged-in serial sessions that may be affected by getty reconfig
* Warning the user when changes are committed and serial sessions are active,
otherwise restart services as normal. No prompts issued during commit,
all config gen/commit steps still occur except for the service restarts
(everything remains consistent)
* To apply committed changes, user will need to run "restart serial console"
to complete the process or reboot the whole router
* Added additional flags and target filtering for generic use of helpers.
(cherry picked from commit bc9049ebd76576d727fa87b10b96d1616950237c)
|
|
(cherry picked from commit 31acb42ecdf4ecf0f636f831f42a845b8a00d367)
|
|
iifname/oifname
When any of the following features NAT, NAT66 or Firewall is enabled, for every
VRF on the CLI we install one rule into nftables for conntrack:
chain vrf_zones_ct_in {
type filter hook prerouting priority raw; policy accept;
counter packets 3113 bytes 32227 ct original zone set iifname map @ct_iface_map
counter packets 8550 bytes 80739 ct original zone set iifname map @ct_iface_map
counter packets 5644 bytes 67697 ct original zone set iifname map @ct_iface_map
}
This is superfluous.
(cherry picked from commit d6e9824f1612bd8c876437c071f31a1a0f44af5d)
|
|
(cherry picked from commit 115e99630a317cab62c6f99e0461f6ce2c1edaf3)
|
|
by TuneD (#3863)
(cherry picked from commit 7b82e4005724683c6311fab22358746f2cca4c1b)
Co-authored-by: Nataliia Solomko <natalirs1985@gmail.com>
|
|
Only some (e.g. ethernet or wireguard) interfaces validate if the supplied VRF
actually exists. If this is not validated, one can pass an invalid VRF to the
system which generates an OSError exception.
To reproduce
set interfaces vxlan vxlan1 vni 1000
set interfaces vxlan vxlan1 remote 1.2.3.4
set interfaces vxlan vxlan1 vrf smoketest
results in
OSError: [Errno 255] failed to run command: ip link set dev vxlan1 master smoketest_mgmt
This commit adds the missing verify_vrf() call to the missing interface types
and an appropriate smoketest for all interfaces supporting VRF assignment.
(cherry picked from commit dd0ebffa33728e452ac6e11737c2283f0e390359)
Co-authored-by: Christian Breunig <christian@breunig.cc>
|
|
This was found during smoketesting as thoase started to repeadingly fail in the last weeks
File "/usr/libexec/vyos/tests/smoke/cli/test_interfaces_wireless.py", line 534, in test_wireless_security_station_address
self.assertTrue(process_named_running('hostapd'))
AssertionError: None is not true
Digging into this revealed that this is NOT related to the smoketest coding but
to hostapd/systemd instead. With a configured WIFI interface and calling:
"sudo systemctl reload-or-restart hostapd@wlan1" multiple times in a short
period caused systemd to report:
"Jul 18 16:15:32 systemd[1]: hostapd@wlan1.service: Deactivated successfully."
According to the internal systemd logic used in our version this is explained by:
/* If there's a stop job queued before we enter the DEAD state, we shouldn't act on Restart=, in order to not
* undo what has already been enqueued. */
if (unit_stop_pending(UNIT(s)))
allow_restart = false;
if (s->result == SERVICE_SUCCESS)
s->result = f;
if (s->result == SERVICE_SUCCESS) {
unit_log_success(UNIT(s));
end_state = SERVICE_DEAD;`
Where unit_log_success() generates the log message in question.
Improve the restart login in the wireless interface script and an upgrade to
hostapd solved the issue.
(cherry picked from commit a67f49d99eda00998c425f9a663e138dbd0f7755)
|
|
Authored-By: Alain Lamar <alain_lamar@yahoo.de>
(cherry picked from commit d5e988ba2d0fa0189feff22374c9b46eb49e2e79)
|
|
Commit e3c71af1466 ("remove secrets file if the tunnel is deleted and fix
opmode commands") added a code path into verify() which removed files on the
system if TOTP was not defined.
This commit moves the code path to the appropriate generate() function.
(cherry picked from commit 40c835992db9217f48e54dbbf15a7fbf1dcba482)
|
|
(cherry picked from commit 23a3419d512139650cfe3dc76759b370b0c0c3d6)
|
|
Remove unused import (left over) from commit 36f3791e0 ("utils: migrate to new
get_vrf_tableid() helper")
(cherry picked from commit b551f542c5c906c901e3be37ad3fd68c8248473d)
|
|
Commit 452068ce7 ("interfaces: T6592: moving an interface between VRF instances
failed") introduced a new helper to retrieve the VRF table ID from the Kernel.
This commit migrates the old code path where the individual fields got queried
to the new helper vyos.utils.network.get_vrf_tableid().
(cherry picked from commit 36f3791e0c15267483d59a3bb74465811d08df88)
|
|
(cherry picked from commit e2b05343b30d2f989968532106e792cbaf75ecf6)
|
|
(cherry picked from commit 804efa2ef6bfee84d13f633d863f6f22f9eec273)
Co-authored-by: Viacheslav Hletenko <v.gletenko@vyos.io>
|
|
If a firewall is not configured there is no reason to get and
execute telegraf firewall custom scripts as there are no nft
chain in the firewall nftables configuration
(cherry picked from commit ebff0c481907ac0c2c0be9981c3c3d87caf3003b)
|
|
Add Loki plugin to telegraf
set service monitoring telegraf loki url xxx
(cherry picked from commit 3365eb7ab99fa9a259fe440eb51e82fc0a0a4dc6)
|
|
T751: Remove ids suricata
|
|
T3202: Enable wireguard debug messages (backport #3679)
|
|
snmp: T6489: use new Python wrapper to interact with config filesystem (backport #3694)
|
|
filesystem
(cherry picked from commit d7a18a3da949bfa3df89661cc0871e8f23b18a10)
|
|
(cherry picked from commit e1a34e661d3e5f0090550796ac266dac15e1e337)
|
|
my_set/my_delete
(cherry picked from commit da29c9b3ab7b0cc23d64c8b033fc5a79c1b09174)
|
|
Do no longer use my_set and my_delete as this prevents scripts beeing run under
supervision of vyos-configd.
(cherry picked from commit 7e0e8101998a6c8de6cb93c42bfbf1278c13f226)
|
|
(cherry picked from commit 9495f904fcc157521ca001ee21cf31be28a6b3a0)
|
|
(cherry picked from commit d818788932e3c57d020cca9236df7275da452fce)
|
|
(cherry picked from commit c0b2693cebc3429e1974a9cec5946fa88ffc0205)
|
|
Add possibility to provide a full CA chain to the openconnect server.
* Support multiple CA certificates
* For every CA certificate specified, always determine the full certificate
chain in the background and add the necessary SSL certificates
(cherry picked from commit 973f06c00b902c43dfea34bdf01bdec7c599c452)
Co-authored-by: Christian Breunig <christian@breunig.cc>
|
|
(cherry picked from commit f29caa824c02c833a3978b9236391e4277c1a6ba)
|
|
Commit 9f9891a2099 ("pki: T6241: Fix dependency updates on PKI changes") added
a print() statement which notified the users about the subsystems which got
supplied with an updated certificate.
Example:
> PKI: Updating config: interfaces openvpn vtun0 tls certificate openvpn_vtun0
> PKI: Updating config: interfaces openvpn vtun0 tls ca_certificate openvpn_vtun0_1
This is an informational message which should maybe (if needed) be sent to
syslog. But the main issue is that CLI paths are mangled (- to _) which makes
the about print output wrong and could potentially confuse users.
Statement has been commented to be re-enabled for debugging.
(cherry picked from commit a4d49a96918c0f0dac3d17f9cf3a5b8f3a9505c0)
Co-authored-by: Christian Breunig <christian@breunig.cc>
|
|
openvpn: T5487: Remove deprecated option --cipher for server and client mode
|
|
|
|
T6442: CGNAT add log for address allocation
|
|
vyos.utils: T5195: import vyos.cpu to this package
|
