| Age | Commit message (Collapse) | Author |
|---|
|
We always enable HTTPS in ddclient configuration, however
`http://checkip.dyndns.org` is HTTP only and does not support HTTPS.
Warn the user if they are using this service.
Also, make `url` in `web-options` mandatory.
|
|
|
|
configdict: T5837: add support to return added nodes when calling node_changed()
|
|
snmp: 5856: fix service removal error
|
|
When deleting SNMP from CLI the 'delete' key was not honored in the config
dictionary, leading to a false process startup causing the following error:
Job for snmpd.service failed because the control process exited with error code.
See "systemctl status snmpd.service" and "journalctl -xeu snmpd.service" for details.
|
|
node_changed() will return a list of changed keys under "path". We are not
always interested what changed, sometimes we are only interested if something
changed at all, that what vyos.configdict.is_node_changed() is for.
|
|
Match mark allows to use firewall marks of packet to use
a specific pool
Example of instance config /run/jool/instance-100.json
```
...
"pool4": [
{
"protocol": "TCP",
"prefix": "192.0.2.10",
"port range": "1-65535",
"mark": 23
},
...
```
|
|
After update KEA to 2.4.x in the bf04cd8fea44d375fb7d93d75a1f31c220730c88
there is a file that expects ConditionFileNotEmpty=/etc/kea/kea-api-password
It cause the unit `kea-ctrl-agent.service` cannot start
systemd[1]: kea-ctrl-agent.service - Kea Control Agent was skipped because of an unmet condition check (ConditionFileNotEmpty=/etc/kea/kea-api-password)
Override systemd kea-ctrl-agent.service do not check this file
|
|
srv6: T591: enable SR enabled packet processing on defined interfaces
|
|
T2898: add ndp-proxy service
|
|
VyOS CLI command
set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static'
Will generate the following NDP proxy configuration
$ cat /run/ndppd/ndppd.conf
# autogenerated by service_ndp-proxy.py
# This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route
route-ttl 30000
# This sets up a listener, that will listen for any Neighbor Solicitation
# messages, and respond to them according to a set of rules
proxy eth0 {
# Turn on or off the router flag for Neighbor Advertisements
router no
# Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds)
timeout 500
# Control how long a valid or invalid entry remains in the cache (milliseconds)
ttl 30000
# This is a rule that the target address is to match against. If no netmask
# is provided, /128 is assumed. You may have several rule sections, and the
# addresses may or may not overlap.
rule 2001:db8::/64 {
static
}
}
|
|
The Linux Kernel needs to be told if IPv6 SR enabled packets whether should be
processed or not. This is done using
/proc/sys/net/conf/<iface>/seg6_* variables:
seg6_enabled - BOOL
Accept or drop SR-enabled IPv6 packets on this interface.
Relevant packets are those with SRH present and DA = local.
0 - disabled (default)
not 0 - enabled
Or the VyOS CLI command:
* set protocols segment-routing interface eth0 srv6
|
|
Enable/Disable VRF strict mode, when net.vrf.strict_mode=0 (default) it is
possible to associate multiple VRF devices to the same table. Conversely, when
net.vrf.strict_mode=1 a table can be associated to a single VRF device.
A VRF table can be used by the VyOS CLI only once (ensured by verify()), this
simply adds an additional Kernel safety net, but a requirement for IPv6 segment
routing headers.
|
|
when no API keys are set
|
|
* Move Kea socket permission change on-demand and speed up conf scripts
* Fix issue with DHCP reservations when no `ip-address` value
|
|
frr: T4020: add option to define number of open file descriptors
|
|
This allows the operator to control the number of open file descriptors each
daemon is allowed to start with. The current assumed value on most operating
systems is 1024.
If the operator plans to run bgp with several thousands of peers then this is
where we would modify FRR to allow this to happen.
set system frr descriptors <n>
|
|
Add recursive_defaults values for BGP "get_config" dictionary.
|
|
T4163: Add BGP Monitoring Protocol BMP feature
|
|
T5798: load-balancing revese-proxy add multiple SSL certificates
|
|
Add BMP feature.
BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring
data from BGP routers to network management entities
https://docs.frrouting.org/en/latest/bmp.html
Example:
set system frr bmp
commit
run restart bgp
set protocols bgp system-as '65001'
set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast
set protocols bgp neighbor 192.0.2.11 remote-as '65001'
set protocols bgp bmp mirror-buffer-limit '256000000'
set protocols bgp bmp target foo address '127.0.0.1'
set protocols bgp bmp target foo port '5000'
set protocols bgp bmp target foo min-retry '1000'
set protocols bgp bmp target foo max-retry '2000'
set protocols bgp bmp target foo mirror
set protocols bgp bmp target foo monitor ipv4-unicast post-policy
set protocols bgp bmp target foo monitor ipv4-unicast pre-policy
set protocols bgp bmp target foo monitor ipv6-unicast post-policy
set protocols bgp bmp target foo monitor ipv6-unicast pre-policy
|
|
SRv6: T591: initial implementation to support locator definition
|
|
|
|
VyOS CLI
set protocols segment-routing srv6 locator bar prefix '2001:b::/64'
set protocols segment-routing srv6 locator foo behavior-usid
set protocols segment-routing srv6 locator foo prefix '2001:a::/64'
Will generate in FRR
segment-routing
srv6
locators
locator bar
prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16
exit
!
locator foo
prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16
behavior usid
exit
!
exit
!
exit
!
exit
|
|
set protocols bgp sid vpn per-vrf export '99'
set protocols bgp srv6 locator 'foo'
set protocols bgp system-as '100'
Will generate in FRR config
router bgp 100
no bgp ebgp-requires-policy
no bgp default ipv4-unicast
no bgp network import-check
!
segment-routing srv6
locator foo
exit
sid vpn per-vrf export 99
exit
|
|
Dynamic interfaces such as PPPoE/sstpc can not exist during
verification dns dynamic. As they added and removed dynamically.
Add interface_filter to exclude them from checks
|
|
dhcp: T3316: Migrate dhcp/dhcpv6 server to Kea
|
|
login: T4943: use pam-auth-update to enable/disable Google authenticator
|
|
Add ability to configure multiple SSL certificates for
frontend/service
set load-balancing reverse-proxy service web mode http
set load-balancing reverse-proxy service web port 443
set load-balancing reverse-proxy service web ssl certificate cert1
set load-balancing reverse-proxy service web ssl certificate cert2
|
|
The initial version always enabled Google authenticator (2FA/MFA) support by
hardcoding the PAM module for sshd and login.
This change only enables the PAM module on demand if any use has 2FA/MFA
configured. Enabling the module is done system wide via pam-auth-update by
using a predefined template.
Can be tested using:
set system login user vyos authentication plaintext-password vyos
set system login user vyos authentication otp key 'QY735IG5HDHBFHS5W7Y2A4EM274SMT3O'
See https://docs.vyos.io/en/latest/configuration/system/login.html for additional
details.
|
|
|
|
- Update the base (rebase)
- Move include/nat64-protocol.xml.i => include/nat64/protocol.xml.i
- Delete unwanted `write_json`, use `write_file` instead
- Remove unnecessary deleting of default values for tagNodes T2665
- Add smoketest
Example:
```
set interfaces ethernet eth0 address '192.168.122.14/24'
set interfaces ethernet eth0 address '192.168.122.10/24'
set interfaces ethernet eth2 address '2001:db8::1/64'
set nat64 source rule 100 source prefix '64:ff9b::/96'
set nat64 source rule 100 translation pool 10 address '192.168.122.10'
set nat64 source rule 100 translation pool 10 port '1-65535'
```
|
|
Signed-off-by: Joe Groocock <me@frebib.net>
|
|
T5779: conntrack: Apply fixes to <set system conntrack timeout custom>
|
|
Remove what was not working on 1.3, migrate what was working to new syntax and extend feature for ipv6.
|
|
accel-ppp: T5688: Standardized pool configuration in accel-ppp
|
|
Standardized pool configuration for all accel-ppp services.
1. Only named pools are used now.
2. Allows all services to use range in x.x.x.x/mask
and x.x.x.x-x.x.x.y format
3. next-pool can be used in all services
2. Allows to use in ipoe gw-ip-address without pool configuration
which allows to use Fraimed-IP-Address attribute by radius.
3. Default pool name should be explicidly configured
with default-pool.
4. In ipoe netmask and range subnet can be different.
|
|
Modify the configuration path to be consistent with the usual dialects
of VyoS configuration (wireguard, dns, firewall, etc.)
This would also shorten the configuration path and have a unified
treatment for RFC2136-based updates and other 'web-service' based updates.
While at it, add support for per-service web-options. This would allow
for probing different external URLs on a per-service basis.
|
|
|
|
|
|
https api: T5772: check if keys are configured unless PAM auth is enabled for GraphQL
|
|
This fixes the implementation in e062a8c11 ("pppoe: T5630: allow to specify MRU
in addition to already configurable MTU") and restores the bahavior that MRU
defaults to MTU if MRU is not explicitly set.
This was the behavior in VyOS 1.3.3 and below before we added ability to define
the MRU value.
|
|
vxlan: T5753: add support for VNI filtering
|
|
unless PAM auth is enabled for GraphQL
|
|
This complements commit f5e43b136 ("http: T5762: api: make API socket backend
communication the one and only default") so we have a consistent port CLI node
across VyOS components.
|
|
Why: Smoketests fail as they can not establish IPv6 connection to uvicorn
backend server.
https://github.com/vyos/vyos-1x/pull/2481 added a bunch of new smoketests.
While debugging those failing, it was uncovered, that uvicorn only listens on
IPv4 connections
vyos@vyos# netstat -tulnp | grep 8080
(Not all processes could be identified, non-owned process info
will not be shown, you would have to be root to see it all.)
tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN -
As the CLI already has an option to move the API communication from an IP to a
UNIX domain socket, the best idea is to make this the default way of
communication, as we never directly talk to the API server but rather use the
NGINX reverse proxy.
|
|
In a service provider network a service provider typically supports multiple
bridge domains with overlapping vlans. One bridge domain per customer. Vlans in
each bridge domain are mapped to globally unique VXLAN VNI ranges assigned to
each customer.
Without the ability of VNI filtering, we can not provide VXLAN tunnels
with multiple tenants all requiring e.g. VLAN 10.
To Test:
set interfaces vxlan vxlan987 parameters external
set interfaces vxlan vxlan987 source-interface eth0
set interfaces vxlan vxlan987 parameters vni-filter
set interfaces vxlan vxlan987 vlan-to-vni 50 vni 10050
set interfaces vxlan vxlan987 vlan-to-vni 51 vni 10051
set interfaces vxlan vxlan987 vlan-to-vni 52 vni 10052
set interfaces vxlan vxlan987 vlan-to-vni 53 vni 10053
set interfaces vxlan vxlan987 vlan-to-vni 54 vni 10054
set interfaces vxlan vxlan987 vlan-to-vni 60 vni 10060
set interfaces vxlan vxlan987 vlan-to-vni 69 vni 10069
set interfaces bridge br0 member interface vxlan987
Add new op-mode command: show bridge vni
Interface VNI
----------- -----------
vxlan987 10050-10054
vxlan987 10060
vxlan987 10069
|
|
|
|
|
|
|
