summaryrefslogtreecommitdiff
path: root/src/conf_mode
AgeCommit message (Collapse)Author
2021-01-03mirror: add verify() check so we can not mirror back to our selfChristian Poessinger
2021-01-03dhcp: T2562: harden implementation for non existing shared-subnetsChristian Poessinger
2021-01-03dhcp: T3180: bugfix assignment of sliced ranges to config dictChristian Poessinger
A reference to a dictionary key obtained by a for loop can not be used to update values inside that dictionaries key. You must use the original path to the nested dictionaries key.
2021-01-03dhcp: T3180: bugfix NameError when slicing server rangesChristian Poessinger
Introduced in commit e46def834483e ("dhcp: T3100: re-add range slicing support when exclude addresses are used") by not obeying the move from list to dict and still relying on the old list names variables.
2021-01-02vrf: T2321: assign loopback IP addresses to individual VRF interfacesChristian Poessinger
47: bar: <NOARP,MASTER,UP,LOWER_UP> mtu 65536 qdisc noqueue state UP group default qlen 1000 link/ether 76:7d:c0:53:6d:89 brd ff:ff:ff:ff:ff:ff inet 127.0.0.1/8 scope host bar valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever
2021-01-01ethernet: T3171: add CLI option to enable RPS (Receive Packet Steering)Christian Poessinger
set interfaces ethernet <interface> offload rps
2020-12-31openvpn: T2994: fix ipv6 server modeChristian Poessinger
2020-12-29ethernet: T1466: add EAPoL supportChristian Poessinger
2020-12-28webproxy: T563: squidguard: support default rulesetChristian Poessinger
2020-12-28webproxy: T563: add squidguard bodyChristian Poessinger
2020-12-28webproxy: T563: improve handling of cache-peersChristian Poessinger
2020-12-28webproxy: T563: migrate from old Perl code to XML and get_config_dict()Christian Poessinger
Basic proxy functionality is working but the squidguard smoketest still fails as this is yet not implemented.
2020-12-23xdp: T2666: move CLI node to "interfaces ethernet <eth> xdp"Christian Poessinger
2020-12-23xdp: T2666: require at least 2 TX queuesChristian Poessinger
2020-12-17flow-accounting: T3132: enable egress traffic accountingJan-Philipp Benecke
2020-12-08bgp: T2174: Fix Template. Update to use FRRConfig frameworksever-sever
2020-12-07system: T3119: migrate "system ip" to get_config_dict() incl. smoketestChristian Poessinger
2020-12-07Merge pull request #636 from c-po/t2562-dhcpChristian Poessinger
dhcp: T2562: add "listen-address" CLI node for better DHCP relay support
2020-12-06dhcpv6-relay: T3095: is_ipv6_link_local() now supports a prefix lengthChristian Poessinger
2020-12-06dhcpv6: T3100: migrate server configuration to get_config_dict()Christian Poessinger
2020-12-06dhcp: T2562: add "listen-address" CLI node for better DHCP relay supportChristian Poessinger
Running ISC DHCP server as backend server for multiple pools served to relay agents requires DHCPd to explicitly listen on give interfaces or a "transit" subnet declaration facing the network where we receive the DHCPREQ messages on. This implements a new "listen-address" CLI node, the given address is validated if it is assigned to the system and upon success, a proper "subnet { }" statement is added into dhcpd.conf
2020-12-04dhcp: T3100: re-add range slicing support when exclude addresses are usedChristian Poessinger
Support was not yet present after the rewrite from commit 84b7ade2 ("dhcp: T3100: migrate server configuration to get_config_dict()")
2020-12-04dhcp: T3100: migrate server configuration to get_config_dict()Christian Poessinger
2020-12-03pim: igmp: T2744: Define the absolute path to pimdDmitriyEshenko
2020-12-03isis: T1316: Fix isis delete section. Use an updated frr frameworksever-sever
2020-12-01nat: T3102: Check key in dictionaryDmitriyEshenko
2020-12-01vpn: ipsec: T3093: add XML for vpn ipsec conf-modeViacheslav Hletenko
2020-12-01dhcpv6: T1433: combine templates for v4 and v6Christian Poessinger
2020-11-30Merge pull request #624 from Cheeze-It/currentChristian Poessinger
mpls-conf: T915: Add ethernet vif sub interface MPLS enable
2020-11-30mpls-conf: T915: Add ethernet vif MPLS enableCheeze_It
In this commit we added ethernet sub interface MPLS enablement. Per request by @bbs2web, this functionality is now possible. This should now allow ethernet switched networks with VLAN tags to also allow for MPLS packet flow.
2020-11-30Merge pull request #612 from sever-sever/T1316Daniil Baturin
frr-isis: T1316: Add new routing feature ISIS
2020-11-30frr-is-is: T1316: Add new routing feature IS-ISsever-sever
2020-11-29dhcpv6-relay: T3095: improve verify()Christian Poessinger
- Upstream interfaces require a DHCPv6 server to be configured - Listen interface must have a a global unicast address assigned, else ISC dhcrelay won't start.
2020-11-29dhcpv6-relay: T3095: migrate service to get_config_dict()Christian Poessinger
2020-11-29smoketest: dhcpv6-relay: T3095: initial testsChristian Poessinger
2020-11-29dhcp-relay: T3095: migrate service to get_config_dict()Christian Poessinger
2020-11-29smoketest: dhcp-relay: T3095: initial testsChristian Poessinger
2020-11-28nat: T3092: migrate to get_config_dict()Christian Poessinger
The NAT system consists out of nested tag nodes which makes manual parsing very hard. This is a perfect candidate for migrating this to get_config_dict() as there is already a smoketest in place. In addition this should make it easier to add features like static nat/hairpin.
2020-11-28system: T3038: remove /dev/console from loadkeysChristian Poessinger
/dev/console is not always present, e.g. on headless devices like an APU4.
2020-11-27vyos.template: T2720: always enable Jinja2 trim_blocks featureChristian Poessinger
2020-11-27igmp-proxy: T3088: migrate to get_config_dict()Christian Poessinger
2020-11-26pim: igmp: igmp-proxy: T2744: Add check to prevent pimd and igmp-proxy conflictDmitriyEshenko
2020-11-23mpls-conf: T915: fix Python format string after refactoringCheeze-It
2020-11-23mpls: T915: unclutter verify() code by using "not" statementsChristian Poessinger
2020-11-23mpls: T915: replace os.system() calls with vyos.util.call()Christian Poessinger
Also drop the Python2 print formatting code in favour of Python3 formatted strings.
2020-11-23openvpn: T3074: fix site-2-site operation modeChristian Poessinger
When rendering the configs "ifconfig" statement wrong IP addresses have been used for the "tun" operating mode. This has been corrected.
2020-11-23Merge pull request #616 from Cheeze-It/currentChristian Poessinger
mpls-conf: T915: Refactored template, handler, added global features
2020-11-22mpls-conf: T915: Refactored FRR LDP template, MPLS handler, added MPLS ↵Cheeze_It
global features So this is a big update. The first thing that was done was a refactor to the FRR LDP template, MPLS handler, and XML conf tree MPLS global additions. The refactors should work and I did test them in my lab. It seems that everything does work as needed so far in my testing. There is something here that is considered configuration breaking from the old setup though. In the old setup the MPLS interface operation (as in the interfaces accepting MPLS labels and processing them) was tied with LDP. What this means is that MPLS processing was enabled at the same time as LDP interfaces were configured. We do not want this behavior for the future as there's other MPLS underlay technologies like SR and RSVP. If someone wants to enable SR or RSVP without enabling LDP then they now can. Before, they couldn't. The other additions are global changes to MPLS TTL propagation and MPLS max TTL enforcement. They have now been added. Lastly, there is an frr-reload bug that Runar Borge found with this. We have found that when totally deleting LDP that there has to be 3 commits done. This is because frr-reload doesn't properly do what it needs to do in 1 operation so we had to do 3. This will only affect people that are doing an entire LDP clear using "delete protocols mpls ldp." Otherwise it isn't seen. Anyway, this refactor now works with the FRR daemon directly for all changes. This also makes it much easier for adding stuff in the future. Thank you
2020-11-22bgp: T2174: refactor Jinja template and reduce redundant pathsChristian Poessinger
The Jinja2 template contained a lot of redundant paths which only differed in either the address-family or neighbor vs. peer-group. This paths have been combined into for loops and a macro for generating a neighbor statement as peer-groups and regular neighbors share ~95% of the config.
2020-11-22isis: T1316: remove debug printChristian Poessinger
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-04 16:19:34 +0000