| Age | Commit message (Collapse) | Author |
|---|
|
(cherry picked from commit 31acb42ecdf4ecf0f636f831f42a845b8a00d367)
|
|
iifname/oifname
When any of the following features NAT, NAT66 or Firewall is enabled, for every
VRF on the CLI we install one rule into nftables for conntrack:
chain vrf_zones_ct_in {
type filter hook prerouting priority raw; policy accept;
counter packets 3113 bytes 32227 ct original zone set iifname map @ct_iface_map
counter packets 8550 bytes 80739 ct original zone set iifname map @ct_iface_map
counter packets 5644 bytes 67697 ct original zone set iifname map @ct_iface_map
}
This is superfluous.
(cherry picked from commit d6e9824f1612bd8c876437c071f31a1a0f44af5d)
|
|
(cherry picked from commit 115e99630a317cab62c6f99e0461f6ce2c1edaf3)
|
|
by TuneD (#3863)
(cherry picked from commit 7b82e4005724683c6311fab22358746f2cca4c1b)
Co-authored-by: Nataliia Solomko <natalirs1985@gmail.com>
|
|
Only some (e.g. ethernet or wireguard) interfaces validate if the supplied VRF
actually exists. If this is not validated, one can pass an invalid VRF to the
system which generates an OSError exception.
To reproduce
set interfaces vxlan vxlan1 vni 1000
set interfaces vxlan vxlan1 remote 1.2.3.4
set interfaces vxlan vxlan1 vrf smoketest
results in
OSError: [Errno 255] failed to run command: ip link set dev vxlan1 master smoketest_mgmt
This commit adds the missing verify_vrf() call to the missing interface types
and an appropriate smoketest for all interfaces supporting VRF assignment.
(cherry picked from commit dd0ebffa33728e452ac6e11737c2283f0e390359)
Co-authored-by: Christian Breunig <christian@breunig.cc>
|
|
This was found during smoketesting as thoase started to repeadingly fail in the last weeks
File "/usr/libexec/vyos/tests/smoke/cli/test_interfaces_wireless.py", line 534, in test_wireless_security_station_address
self.assertTrue(process_named_running('hostapd'))
AssertionError: None is not true
Digging into this revealed that this is NOT related to the smoketest coding but
to hostapd/systemd instead. With a configured WIFI interface and calling:
"sudo systemctl reload-or-restart hostapd@wlan1" multiple times in a short
period caused systemd to report:
"Jul 18 16:15:32 systemd[1]: hostapd@wlan1.service: Deactivated successfully."
According to the internal systemd logic used in our version this is explained by:
/* If there's a stop job queued before we enter the DEAD state, we shouldn't act on Restart=, in order to not
* undo what has already been enqueued. */
if (unit_stop_pending(UNIT(s)))
allow_restart = false;
if (s->result == SERVICE_SUCCESS)
s->result = f;
if (s->result == SERVICE_SUCCESS) {
unit_log_success(UNIT(s));
end_state = SERVICE_DEAD;`
Where unit_log_success() generates the log message in question.
Improve the restart login in the wireless interface script and an upgrade to
hostapd solved the issue.
(cherry picked from commit a67f49d99eda00998c425f9a663e138dbd0f7755)
|
|
Authored-By: Alain Lamar <alain_lamar@yahoo.de>
(cherry picked from commit d5e988ba2d0fa0189feff22374c9b46eb49e2e79)
|
|
Commit e3c71af1466 ("remove secrets file if the tunnel is deleted and fix
opmode commands") added a code path into verify() which removed files on the
system if TOTP was not defined.
This commit moves the code path to the appropriate generate() function.
(cherry picked from commit 40c835992db9217f48e54dbbf15a7fbf1dcba482)
|
|
(cherry picked from commit 23a3419d512139650cfe3dc76759b370b0c0c3d6)
|
|
Remove unused import (left over) from commit 36f3791e0 ("utils: migrate to new
get_vrf_tableid() helper")
(cherry picked from commit b551f542c5c906c901e3be37ad3fd68c8248473d)
|
|
Commit 452068ce7 ("interfaces: T6592: moving an interface between VRF instances
failed") introduced a new helper to retrieve the VRF table ID from the Kernel.
This commit migrates the old code path where the individual fields got queried
to the new helper vyos.utils.network.get_vrf_tableid().
(cherry picked from commit 36f3791e0c15267483d59a3bb74465811d08df88)
|
|
(cherry picked from commit e2b05343b30d2f989968532106e792cbaf75ecf6)
|
|
(cherry picked from commit 804efa2ef6bfee84d13f633d863f6f22f9eec273)
Co-authored-by: Viacheslav Hletenko <v.gletenko@vyos.io>
|
|
If a firewall is not configured there is no reason to get and
execute telegraf firewall custom scripts as there are no nft
chain in the firewall nftables configuration
(cherry picked from commit ebff0c481907ac0c2c0be9981c3c3d87caf3003b)
|
|
Add Loki plugin to telegraf
set service monitoring telegraf loki url xxx
(cherry picked from commit 3365eb7ab99fa9a259fe440eb51e82fc0a0a4dc6)
|
|
T751: Remove ids suricata
|
|
T3202: Enable wireguard debug messages (backport #3679)
|
|
snmp: T6489: use new Python wrapper to interact with config filesystem (backport #3694)
|
|
filesystem
(cherry picked from commit d7a18a3da949bfa3df89661cc0871e8f23b18a10)
|
|
(cherry picked from commit e1a34e661d3e5f0090550796ac266dac15e1e337)
|
|
my_set/my_delete
(cherry picked from commit da29c9b3ab7b0cc23d64c8b033fc5a79c1b09174)
|
|
Do no longer use my_set and my_delete as this prevents scripts beeing run under
supervision of vyos-configd.
(cherry picked from commit 7e0e8101998a6c8de6cb93c42bfbf1278c13f226)
|
|
(cherry picked from commit 9495f904fcc157521ca001ee21cf31be28a6b3a0)
|
|
(cherry picked from commit d818788932e3c57d020cca9236df7275da452fce)
|
|
(cherry picked from commit c0b2693cebc3429e1974a9cec5946fa88ffc0205)
|
|
Add possibility to provide a full CA chain to the openconnect server.
* Support multiple CA certificates
* For every CA certificate specified, always determine the full certificate
chain in the background and add the necessary SSL certificates
(cherry picked from commit 973f06c00b902c43dfea34bdf01bdec7c599c452)
Co-authored-by: Christian Breunig <christian@breunig.cc>
|
|
(cherry picked from commit f29caa824c02c833a3978b9236391e4277c1a6ba)
|
|
Commit 9f9891a2099 ("pki: T6241: Fix dependency updates on PKI changes") added
a print() statement which notified the users about the subsystems which got
supplied with an updated certificate.
Example:
> PKI: Updating config: interfaces openvpn vtun0 tls certificate openvpn_vtun0
> PKI: Updating config: interfaces openvpn vtun0 tls ca_certificate openvpn_vtun0_1
This is an informational message which should maybe (if needed) be sent to
syslog. But the main issue is that CLI paths are mangled (- to _) which makes
the about print output wrong and could potentially confuse users.
Statement has been commented to be re-enabled for debugging.
(cherry picked from commit a4d49a96918c0f0dac3d17f9cf3a5b8f3a9505c0)
Co-authored-by: Christian Breunig <christian@breunig.cc>
|
|
openvpn: T5487: Remove deprecated option --cipher for server and client mode
|
|
|
|
T6442: CGNAT add log for address allocation
|
|
vyos.utils: T5195: import vyos.cpu to this package
|
|
Add the configuration command to log current CGNAT allocation
set nat cgnat log-allocation
|
|
|
|
|
|
|
|
The intention of vyos.utils package is to have a common ground for repeating
actions/helpers. This is also true for number of CPUs and their respective
core count.
Move vyos.cpu to vyos.utils.cpu
|
|
pki: T6463: reverse-proxy service not reloaded when updating SSL certificate(s)
|
|
firewall: T3900: T6394: remove unused import
|
|
The haproxy reverse proxy was not reloaded/restarted with the new SSL
certificate(s) after a change in the PKI subsystem. This was due to missing
dependencies.
|
|
With commit 770edf016838 ("T3900: T6394: extend functionalities in firewall;
move netfilter sysctl timeout parameters defined in conntrack to firewall
global-opton section.") the import of the glob module is no longer
required.
Found my running: make unused-imports
|
|
|
|
Fix external address/port allocation for CGN.
It fixes some cases where external address/ports can be allocated again
to another user.
|
|
T3900: Add support for raw tables in firewall
|
|
timeout parameters defined in conntrack to firewall global-opton section.
|
|
nat64: T6403: validate source prefix for RFC compliance
|
|
|
|
|
|
Simplest fix is to comply with RFC6052. The code change is just masking
out the relevant bits and ensuring they're zeroed.
|
|
Unset params would mistakenly match when None and trigger a validation error even when used params were unique.
Updated check to ensure unique source-addresses if not None, and that (source-interfaces, source-addresses) are
unique together appropriately.
|
