summaryrefslogtreecommitdiff
path: root/src/conf_mode
AgeCommit message (Collapse)Author
2022-12-30T4897: Fix virtual interface rebuild checksYuxiang Zhu
`leaf_node_changed` returns `[]` (empty list) after a leaf node is added. e.g. Setting `source-interface` doesn't work on an existing vxlan interface. Steps to reproduce: - Add a vxlan interface without `source-address` or `source-interface` options set: ``` set interfaces vxlan vxlan999 vni 999 set interfaces vxlan vxlan999 remote 192.168.100.100 commit ``` - Then set `source-address` or `source-interface`: ``` set interfaces vxlan vxlan999 source-interface eth0 commit ``` Actual result: Source address or source-interface are not set: ``` ip -d link show dev vxlan999 76: vxlan999: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/ether 56:08:ba:4d:4e:a8 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 vxlan id 999 remote 192.168.100.100 srcport 0 0 dstport 8472 tos inherit ttl 16 ageing 300 udpcsum noudp6zerocsumtx noudp6zerocsumrx addrgenmode none numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 ``` Expected result: ``` 77: vxlan999: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/ether 9e:05:d9:58:1a:af brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 vxlan id 999 remote 192.168.100.100 dev eth0 srcport 0 0 dstport 8472 tos inherit ttl 16 ageing 300 udpcsum noudp6zerocsumtx noudp6zerocsumrx addrgenmode none numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 ``` All invocations of leaf_node_changed() should be migrated to is_node_changes() if you are only interested in if something changed and don‘t care what exactly changed (content).
2022-12-30pseudo-ethernet: T4391: use is_node_changed() over error prone ↵Christian Poessinger
leaf_node_changed() We only need to use leaf_node_changed() if we are interested in the detailed change to a CLI node (what was the previous content). If we are only interested in if a node changed "at all" is_node_changed() should be used.
2022-12-30tunnel: T4391: use is_node_changed() over error prone leaf_node_changed()Christian Poessinger
We only need to use leaf_node_changed() if we are interested in the detailed change to a CLI node (what was the previous content). If we are only interested in if a node changed "at all" is_node_changed() should be used.
2022-12-30geneve: T4366: use is_node_changed() over error prone leaf_node_changed()Christian Poessinger
We only need to use leaf_node_changed() if we are interested in the detailed change to a CLI node (what was the previous content). If we are only interested in if a node changed "at all" is_node_changed() should be used.
2022-12-27strongSwan: upgrade scripts to work with package version 5.9.8Christian Poessinger
2022-12-25container: T2216: use defaultValue XML definition to define port protocolChristian Poessinger
Instead of hardcoding the default protocol as TCP in the Python script we shall use the XML based defaultValue approach instead. This also automatically exports the default to the CLI completion helper.
2022-12-25container: T2216: add verify() for port definitionChristian Poessinger
If port is specified on the CLI so must be source and destination under the port node.
2022-12-23pki: T4847: extend dependency on sstpc client interfaceChristian Poessinger
2022-12-17sstp: T4384: remote server is mandatory in client modeChristian Poessinger
2022-12-17bonding: T4878: use more is_node_changed() over leaf_node_changed()Christian Poessinger
The implementation of is_node_changed() is less error prone and should always be favoured.
2022-12-17Merge pull request #1626 from nicolas-fort/fwall_group_interfaceChristian Poessinger
T4780: Firewall: add firewall groups in firewall. Extend matching cri…
2022-12-17webproxy: T3810: multiple squidGuard fixesaapostoliuk
1. Added in script update webproxy blacklists generation of all DBs 2. Fixed: if the blacklist category does not have generated db, the template generates an empty dest category in squidGuard.conf and a Warning message. 3. Added template generation for local's categories in the rule section. 4. Changed syntax in the generation dest section for blacklist's categories 4. Fixed generation dest local sections in squidGuard.conf 5. Fixed bug in syntax. The word 'allow' changed to the word 'any' in acl squidGuard.conf
2022-12-17Merge pull request #1358 from sever-sever/T1237Christian Poessinger
routing: T1237: Add new feature failover route
2022-12-15bonding: T4878: Fixed unnecessary bonding flapping during commitzsdc
There was a mistake in a config level that caused triggering the `shutdown_required` flag, even if there were no new interfaces added to a bonding. This commit sets the proper config level to avoid the problem.
2022-12-14routing: T1237: Add new feature failover routeViacheslav Hletenko
Failover route allows to install static routes to the kernel routing table only if required target or gateway is alive When target or gateway doesn't respond for ICMP/ARP checks this route deleted from the routing table Routes are marked as protocol 'failover' (rt_protos) cat /etc/iproute2/rt_protos.d/failover.conf 111 failover ip route add 203.0.113.1 metric 2 via 192.0.2.1 dev eth0 proto failover $ sudo ip route show proto failover 203.0.113.1 via 192.0.2.1 dev eth0 metric 1 So we can safely flush such routes
2022-12-11sstp: T4384: initial implementation of SSTP client CLIChristian Poessinger
vyos@vyos# show interfaces sstpc sstpc sstpc10 { authentication { password vyos user vyos } server sstp.vyos.net ssl { ca-certificate VyOS-CA } }
2022-12-11pppoe: T4384: remove unused import of leaf_node_changedChristian Poessinger
2022-12-09T4868: Fix l2tp ppp IPv6 options in template and config get dictViacheslav Hletenko
L2TP 'ppp-options ipv6 x' can work without declaring IPv6 pool As we can get addresses via RADIUS attributes: - Framed-IPv6-Prefix - Delegated-IPv6-Prefix
2022-12-08T4117: Fix for L2TP DAE CoA server configurationViacheslav Hletenko
Fix l2tp dae server template and python config dict for correctlly handling Dynamic Authorization Extension server configuration
2022-12-07T4861: Openconnect replace restart to reload-or-restartViacheslav Hletenko
Every change in openconnect restarts the ocserv.service Replace "restart" to "reload-or-restart" to avoid disconnect clients during change configs
2022-12-05Merge pull request #1693 from sever-sever/T4860Christian Poessinger
T4860: Verify if mode in openconnect ocserv dict
2022-12-04T4860: Verify if mode in openconnect ocserv dictViacheslav Hletenko
openconnect authentication mode must be set check dict that 'mode' exists in openconnect authentication
2022-12-04T4848: Fix for default route vpn openconnectViacheslav Hletenko
ocserv template expects list of routes but gets str "default" it cause wrong routes like: route = d route = e route = f route = a route = u route = l route = t Fix it
2022-12-03Merge pull request #1691 from sarthurdev/T478Christian Poessinger
firewall: T478: Fix firewall group circular dependency check
2022-12-03firewall: T478: Fix firewall group circular dependency checksarthurdev
2022-12-02Merge pull request #1685 from sever-sever/T4805Christian Poessinger
T4805: Restart pppoe-server if client pool was changed
2022-12-02Merge pull request #1687 from sever-sever/T4825Christian Poessinger
T4825: Verify if you are trying to add a new vethX to exists pair
2022-12-02http-api: T4859: correct calling of script dependencies from http-api.pyJohn Estabrook
2022-12-02T4825: Verify if you are trying to add a new vethX to exists pairViacheslav Hletenko
Verify if you are trying to add a new vethX to exists pair: set int virtual-ethernet veth0 peer-name 'veth1' set int virtual-ethernet veth1 peer-name 'veth0' set int virtual-ethernet veth12 peer-name 'veth0' Verify veth-name and peer-name cannot be the same: set interfaces virtual-ethernet veth0 peer-name veth0
2022-12-02T4805: Restart pppoe-server if client pool was changedViacheslav Hletenko
Some changes for 'service pppoe-server' require 'restart' the accel-ppp@pppoe.service But we use option 'reload-or-restart' that doesn't work correctly with 'accel-ppp' Restart pppoe-server if client pool was changed
2022-11-30pki: T4847: set and call dependent scriptsJohn Estabrook
2022-11-29pki: T4847: fix typosJohn Estabrook
2022-11-29mpls: T915: verify interface actually exists on the systemChristian Poessinger
2022-11-28conf-mode: T4845: add external file for dict of config-mode dependenciesJohn Estabrook
2022-11-25T4825: Verify if veth interface not used in conf before deletingViacheslav Hletenko
Prevent to delete interface "vethX" which used for another interface as "vethY peer-name vethX" set interfaces virtual-ethernet veth0 peer-name 'veth1' set interfaces virtual-ethernet veth1 peer-name 'veth0' commit delete interfaces virtual-ethernet veth0 commit
2022-11-24veth: T4825: minor improvements on XML peer-name handlingChristian Poessinger
2022-11-24T4825: Add interface type vethViacheslav Hletenko
Add interface type veth (Virtual ethernet) One of the usecases it's interconnect different vrf's and default vrf via bridge set interfaces virtual-ethernet veth0 peer-name 'veth1010' set interfaces virtual-ethernet veth1010 address '10.0.0.10/24' set interfaces virtual-ethernet veth1010 peer-name 'veth0' set interfaces virtual-ethernet veth1010 vrf 'foo' set interfaces bridge br0 address '10.0.0.1/24' set interfaces bridge br0 member interface veth0
2022-11-20T4827: Route-map state continue must be with action permit onlyViacheslav Hletenko
route-map action 'deny' cannot be used for "continue" as FRR does not validate it r14(config)# route-map FOO permit 100 r14(config-route-map)# route-map FOO deny 50 r14(config-route-map)# on-match goto 100 % Configuration failed. Error type: validation r14(config-route-map)#
2022-11-19T4780: Firewall: add firewall groups in firewall. Extend matching criteria ↵Nicolas Fort
so this new group can be used in inbound and outbound matcher
2022-11-18Merge pull request #1662 from jestabro/config-script-dependencyDaniil Baturin
firewall: T4821: correct calling of conf_mode script dependencies
2022-11-18Merge pull request #1645 from aapostoliuk/T4793-sagittaChristian Poessinger
T4793: Added warning about disable-route-autoinstall
2022-11-18T4793: Added warning about disable-route-autoinstallaapostoliuk
Added warning message about disable-route-autoinstall when ipsec vti is used.
2022-11-17firewall: T4821: correct calling of conf_mode script dependenciesJohn Estabrook
2022-11-11policy: T2199: T4605: Migrate policy route interface to `policy route|route6 ↵sarthurdev
<name> interface <ifname>` * Include refactor to policy route to allow for deletion of mangle table instead of complex cleanup * T4605: Rename mangle table to vyos_mangle
2022-11-05container: T4802: support per container shared-memory size configurationChristian Poessinger
Size of /dev/shm within a container can be defined via --shm-size when invoking the container. Add corresponding CLI node.
2022-11-03Merge pull request #1633 from sarthurdev/fqdnChristian Poessinger
firewall: T970: T1877: Add source/destination fqdn, refactor domain resolver, firewall groups in NAT
2022-11-03nat: T1877: T970: Add firewall groups to NATsarthurdev
2022-11-03firewall: T970: Refactor domain resolver, add firewall source/destination ↵sarthurdev
`fqdn` node
2022-10-31ipsec: T4787: add support for road-warrior/remote-access RADIUS timeoutChristian Poessinger
This enabled users to also use 2FA/MFA authentication with a radius backend as there is enough time to enter the second factor.
2022-10-29Merge pull request #1621 from sarthurdev/T4774Christian Poessinger
wireguard: T4774: Prevent duplicate peer public keys